Qualcomm Arm64 DeviceTree changes for v6.13 Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G, X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride" development boards thereon, and the SM7325 platform and the Nothing Phone 1. MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi calibration variant. On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2 enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins are adjusted and PMU nodes' compatibles for the two clusters are corrected. The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to DeviceTree overlays, and both gains CMA heap for libcamera to use. SA8775P gains GPI DMA support, support for controlling download mode (bootloader-assisted ramdump support), additional UARTs, and qcrypto support. The "Ride" development board gains WiFi and Bluetooth support. On SC8280XP (8cx Gen3) another UART is described, used in the Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit is described on the CRD and Lenovo ThinkPad X13s. On SDM630/660 the GPU SMMU and clock controller is added, as is the A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and WiFi is then enabled on the Inforce 6560 development board. On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC controller, to enable hotplug. On X Elite, USB Type-C controllers are marked as usb-role-switch capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and wired up to allow setting and cleaning the download mode (bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are updated. USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook S15. The T14s also gains support for a second source trackpad. The Microsoft Surface Laptop gains LID switch and the USB Type-A connector attached to the multiport controller is enabled. The CRD has its HID device power supplies described. Application SMMU is flagged as DMA coherent across QDU1000, SC7180, SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100. In addition to this, the effort to improve style and binding compliance continued.