Merge branch 'b4/x1e80100-dts-pcie6a' into b4/x1e80100-integ

arch/arm64/boot/dts/qcom/x1e80100-crd.dts

@@ -257,6 +257,20 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
 };
 
 &apps_rsc {
@@ -357,6 +371,7 @@ vreg_l12b_1p2: ldo12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -765,11 +780,19 @@ &pcie4_phy {
 };
 
 &pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
 	status = "okay";
 };
 
 &pcie6a_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l1d_0p8>;
 	vdda-pll-supply = <&vreg_l2j_1p2>;
 
 	status = "okay";
@@ -923,6 +946,36 @@ kybd_default: kybd-default-state {
 		bias-disable;
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie6a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio154";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";

arch/arm64/boot/dts/qcom/x1e80100-qcp.dts

@@ -159,6 +159,20 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-boot-on;
 	};
 
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
 	usb-1-ss0-sbu-mux {
 		compatible = "on,fsusb42", "gpio-sbu-mux";
 
@@ -629,11 +643,19 @@ &pcie4_phy {
 };
 
 &pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
 	status = "okay";
 };
 
 &pcie6a_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l1d_0p8>;
 	vdda-pll-supply = <&vreg_l2j_1p2>;
 
 	status = "okay";
@@ -692,6 +714,36 @@ edp_reg_en: edp-reg-en-state {
 		bias-disable;
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie6a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio154";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+		};
+	};
+
 	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
 		oe-n-pins {
 			pins = "gpio168";