According to the power grid documentation, the 0.8v HS PHY shared
regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP
boards.

Fixes: d7e03cce ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Rajendra Nayak <quic_rjendra@quicinc.com>
To: Sibi Sankar <quic_sibis@quicinc.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://lore.kernel.org/r/20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.org



--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 2,
    "change-id": "20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-132a48ed3681",
    "prefixes": [],
    "history": {
      "v1": [
        "20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.org"
      ]
    }
  }
}

The PCIe 6th instance from X1E80100 can be used in both 4-lane mode or
2-lane mode. Add the configuration and compatible for the 4-lane mode.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

The PCIe 6th instance from X1E80100 can be used in both 4-lane mode or
2-lane mode. Document the 4-lane mode as a separate compatible.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

On both QCP and CRD board currently supported upstream, the NVMe sits
on the PCIe 6. Until now that has been configured in dual lane mode
only. The schematics reveal that the NVMe is actually using 4 lanes.
So add support for the 4-lane mode and document the compatible for it.

To: Vinod Koul <vkoul@kernel.org>
To: Kishon Vijay Abraham I <kishon@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://lore.kernel.org/r/20240531-x1e80100-phy-add-gen4x4-v1-0-5c841dae7850@linaro.org



--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 2,
    "change-id": "20240531-x1e80100-phy-add-gen4x4-fa830a5505b6",
    "prefixes": [],
    "history": {
      "v1": [
        "20240531-x1e80100-phy-add-gen4x4-v1-0-5c841dae7850@linaro.org"
      ]
    }
  }
}

In case of all pipe clocks, there is a QMP PHY clock that is feeding them.
If, for whatever reason, the clock from the PHY is not enabled, halt bit
will not get set, and the clock controller driver will assume the clock
is stuck in a specific state. The way this is supposed to be properly
fixed is to defer the checking of the halt bit until after the PHY clock
has been initialized, but doing so complicates the clock controller
driver. In fact, since these pipe clocks are consumed by the PHY, while
the PHY is also the one providing the source, if clock gets stuck, the PHY
driver would be to blame. So instead of checking the halt bit in here,
just skip it and assume the PHY driver is handling the source clock
correctly.

Fixes: 161b7c40 ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

To: Bjorn Andersson <andersson@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Rajendra Nayak <quic_rjendra@quicinc.com>
To: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v3:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v2: https://lore.kernel.org/r/20240628-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v2-1-db3be54b1143@linaro.org

Changes in v2:
- Re-worded the commit message from scratch.
- Changed all pipe clocks halt_check to skip.
- Link to v1: https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v1-1-16c6f4dccbd5@linaro.org

--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 3,
    "change-id": "20240530-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-ef8cf5b5631b",
    "prefixes": [],
    "history": {
      "v1": [
        "20240530-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v1-1-16c6f4dccbd5@linaro.org"
      ],
      "v2": [
        "20240628-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v2-1-db3be54b1143@linaro.org"
      ]
    }
  }
}

Fixes: ee3f0739 ("clk: qcom: Add dispcc clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# Describe the purpose of this series. The information you put here
# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 1,
    "change-id": "20240530-x1e80100-clk-dispcc-fix-pll-ops-431f8c136d17",
    "prefixes": []
  }
}

Allow the USB3 second and third GCC PHY pipe clocks to propagate the
rate to the pipe clocks provided by the QMP combo PHYs. The first
instance is already doing that.

Fixes: ("161b7c40 clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

To: Bjorn Andersson <andersson@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-v1-1-7b2b04cad545@linaro.org



--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 2,
    "change-id": "20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-420a9e2113d1",
    "prefixes": [],
    "history": {
      "v1": [
        "20240530-x1e80100-clk-gcc-usb3-sec-tert-set-parent-rate-v1-1-7b2b04cad545@linaro.org"
      ]
    }
  }
}

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# Describe the purpose of this series. The information you put here
# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 1,
    "change-id": "20240522-x1e80100-fixes-a2061c2cb936",
    "prefixes": []
  }
}

Document the Temperature Sensor (TSENS) on the X1E80100 Platform.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

To: Amit Kucheria <amitk@kernel.org>
To: Thara Gopinath <thara.gopinath@gmail.com>
To: Rafael J. Wysocki <rafael@kernel.org>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Lukasz Luba <lukasz.luba@arm.com>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v3:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v2: https://lore.kernel.org/r/20240628-x1e80100-bindings-thermal-qcom-tsens-v2-1-4843d4c2ba24@linaro.org

Changes in v2:
- Just picked up Krzysztof's R-b tag
- Link to v1: https://lore.kernel.org/r/20240527-x1e80100-bindings-thermal-qcom-tsens-v1-1-0f50f58253e1@linaro.org

--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 3,
    "change-id": "20240522-x1e80100-bindings-thermal-qcom-tsens-aa2db90c4a74",
    "prefixes": [],
    "history": {
      "v1": [
        "20240527-x1e80100-bindings-thermal-qcom-tsens-v1-1-0f50f58253e1@linaro.org"
      ],
      "v2": [
        "20240628-x1e80100-bindings-thermal-qcom-tsens-v2-1-4843d4c2ba24@linaro.org"
      ]
    }
  }
}

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# Describe the purpose of this series. The information you put here
# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 1,
    "change-id": "20240522-x1e80100-bindings-arm-smmu-5273ec8c29b2",
    "prefixes": []
  }
}

The x1e80100, being a compute platform, provides functionality for the
exact same power supplies as sc8280xp. Add the compatible and assign
the sc8280xp match data.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

# Describe the purpose of this series. The information you put here
# will be used by the project maintainer to make a decision whether
# your patches should be reviewed, and in what priority order. Please be
# very detailed and link to any relevant discussions or sites that the
# maintainer can review to better understand your proposed changes. If you
# only have a single patch in your series, the contents of the cover
# letter will be appended to the "under-the-cut" portion of the patch.

# Lines starting with # will be removed from the cover letter. You can
# use them to add notes or reminders to yourself. If you want to use
# markdown headers in your cover letter, start the line with ">#".

# You can add trailers to the cover letter. Any email addresses found in
# these trailers will be added to the addresses specified/generated
# during the b4 send stage. You can also run "b4 prep --auto-to-cc" to
# auto-populate the To: and Cc: trailers based on the code being
# modified.

To: Sebastian Reichel <sre@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://lore.kernel.org/r/20240621-x1e80100-power-supply-qcom-battmgr-v1-1-40cb89a0c144@linaro.org



--- b4-submit-tracking ---
# This section is used internally by b4 prep for tracking purposes.
{
  "series": {
    "revision": 2,
    "change-id": "20240522-x1e80100-power-supply-qcom-battmgr-83442b7cce60",
    "prefixes": [],
    "history": {
      "v1": [
        "20240621-x1e80100-power-supply-qcom-battmgr-v1-1-40cb89a0c144@linaro.org"
      ]
    }
  }
}

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>