- Mar 02, 2016
-
-
santosh.shilimkar@oracle.com authored
The SO_TIMESTAMP generates time stamp for each incoming RDS messages User app can enable it by using SO_TIMESTAMP setsocketopt() at SOL_SOCKET level. CMSG data of cmsg type SO_TIMESTAMP contains the time stamp in struct timeval format. Reviewed-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
santosh.shilimkar@oracle.com authored
RDS iWarp support code has become stale and non testable. As indicated earlier, am dropping the support for it. If new iWarp user(s) shows up in future, we can adapat the RDS IB transprt for the special RDMA READ sink case. iWarp needs an MR for the RDMA READ sink. Signed-off-by:
-
Arnd Bergmann authored
The driver calls cfg80211_get_station, which may be part of a module, so we must not enable BATMAN_ADV_BATMAN_V if BATMAN_ADV=y and CFG80211=m: net/built-in.o: In function `batadv_v_elp_get_throughput': (text+0x5c62c): undefined reference to `cfg80211_get_station' This clarifies the dependency to cover all combinations. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: c833484e ("batman-adv: ELP - compute the metric based on the estimated throughput") Acked-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
- Mar 01, 2016
-
-
Zhang Shengju authored
Since offset is zero, it's not necessary to use set function. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
-
David S. Miller authored
CC [M] net/sched/sch_mqprio.o net/sched/sch_mqprio.c: In function ?mqprio_init?: net/sched/sch_mqprio.c:145: error: unknown field ?tc? specified in initializer net/sched/sch_mqprio.c:145: warning: missing braces around initializer net/sched/sch_mqprio.c:145: warning: (near initialization for ?tc.<anonymous>?) make[2]: *** [net/sched/sch_mqprio.o] Error 1 make[1]: *** [net/sched] Error 2 make: *** [net] Error 2 Several people reported this, surround the unnamed union member initialization with braces to fix. Signed-off-by: -
WANG Cong authored
After commit 52bd2d62 ("net: better skb->sender_cpu and skb->napi_id cohabitation") skb_sender_cpu_clear() becomes empty and can be removed. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David Ahern authored
Commit f1705ec1 allows IPv6 addresses to be retained on a link down. The address can have a cached host route which can point to the wrong FIB table if the L3 enslavement is changed (e.g., route can point to local table instead of VRF table if device is added to an L3 domain). On link up check the table of the cached host route against the FIB table associated with the device and correct if needed. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Deepa Dinamani authored
SCTP probe log timestamps use struct timespec which is not y2038 safe. Use struct timespec64 which is 2038 safe instead. Use monotonic time instead of real time as only time differences are logged. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Signed-off-by:
-
Deepa Dinamani authored
TCP probe log timestamps use struct timespec which is not y2038 safe. Even though timespec might be good enough here as it is used to represent delta time, the plan is to get rid of all uses of timespec in the kernel. Replace with struct timespec64 which is y2038 safe. Prints still use unsigned long format and type. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Deepa Dinamani authored
ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by:
-
Jamal Hadi Salim authored
Example usage: Set the skb priority using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit prio 17 \ action ife encode \ allow prio \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb priority earlier. A zero skb priority will not be sent Alternative hard code static priority of decimal 33 (unlike skbedit) then mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use prio 33 \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by:Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
Jamal Hadi Salim authored
Example usage: Set the skb using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit mark 17 \ action ife encode \ allow mark \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb mark earlier. A zero skb mark, when seen, will not be encoded. Alternative hard code static mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by:
-
Jamal Hadi Salim authored
This action allows for a sending side to encapsulate arbitrary metadata which is decapsulated by the receiving end. The sender runs in encoding mode and the receiver in decode mode. Both sender and receiver must specify the same ethertype. At some point we hope to have a registered ethertype and we'll then provide a default so the user doesnt have to specify it. For now we enforce the user specify it. Lets show example usage where we encode icmp from a sender towards a receiver with an skbmark of 17; both sender and receiver use ethertype of 0xdead to interop. YYYY: Lets start with Receiver-side policy config: xxx: add an ingress qdisc sudo tc qdisc add dev $ETH ingress xxx: any packets with ethertype 0xdead will be subjected to ife decoding xxx: we then restart the classification so we can match on icmp at prio 3 sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xdead \ u32 match u32 0 0 flowid 1:1 \ action ife decode reclassify xxx: on restarting the classification from above if it was an icmp xxx: packet, then match it here and continue to the next rule at prio 4 xxx: which will match based on skb mark of 17 sudo tc filter add dev $ETH parent ffff: prio 3 protocol ip \ u32 match ip protocol 1 0xff flowid 1:1 \ action continue xxx: match on skbmark of 0x11 (decimal 17) and accept sudo tc filter add dev $ETH parent ffff: prio 4 protocol ip \ handle 0x11 fw flowid 1:1 \ action ok xxx: Lets show the decoding policy sudo tc -s filter ls dev $ETH parent ffff: protocol 0xdead xxx: filter pref 2 u32 filter pref 2 u32 fh 800: ht divisor 1 filter pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 0 success 0) match 00000000/00000000 at 0 (success 0 ) action order 1: ife decode action reclassify index 1 ref 1 bind 1 installed 14 sec used 14 sec type: 0x0 Metadata: allow mark allow hash allow prio allow qmap Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: Observe that above lists all metadatum it can decode. Typically these submodules will already be compiled into a monolithic kernel or loaded as modules YYYY: Lets show the sender side now .. xxx: Add an egress qdisc on the sender netdev sudo tc qdisc add dev $ETH root handle 1: prio xxx: xxx: Match all icmp packets to 192.168.122.237/24, then xxx: tag the packet with skb mark of decimal 17, then xxx: Encode it with: xxx: ethertype 0xdead xxx: add skb->mark to whitelist of metadatum to send xxx: rewrite target dst MAC address to 02:15:15:15:15:15 xxx: sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 192.168.122.237/24 \ match ip protocol 1 0xff \ flowid 1:2 \ action skbedit mark 17 \ action ife encode \ type 0xDEAD \ allow mark \ dst 02:15:15:15:15:15 xxx: Lets show the encoding policy sudo tc -s filter ls dev $ETH parent 1: protocol ip xxx: filter pref 10 u32 filter pref 10 u32 fh 800: ht divisor 1 filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:2 (rule hit 0 success 0) match c0a87aed/ffffffff at 16 (success 0 ) match 00010000/00ff0000 at 8 (success 0 ) action order 1: skbedit mark 17 index 6 ref 1 bind 1 Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 2: ife encode action pipe index 3 ref 1 bind 1 dst MAC: 02:15:15:15:15:15 type: 0xDEAD Metadata: allow mark Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: test by sending ping from sender to destination Signed-off-by: -
Nikolay Aleksandrov authored
Allow for more multicast router port information to be dumped such as timer and type attributes. For that that purpose we need to extend the MDBA_ROUTER_PORT attribute similar to how it was done for the mdb entries recently. The new format is thus: [MDBA_ROUTER_PORT] = { <- nested attribute u32 ifindex <- router port ifindex for user-space compatibility [MDBA_ROUTER_PATTR attributes] } This way it remains compatible with older users (they'll simply retrieve the u32 in the beginning) and new users can parse the remaining attributes. It would also allow to add future extensions to the router port without breaking compatibility. Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add support for a temporary router port which doesn't depend only on the incoming query. It can be refreshed if set to the same value, which is a no-op for the rest. Signed-off-by:
-
Nikolay Aleksandrov authored
This is needed for the upcoming temporary port router. There's no point to go through the logic if the value is the same. Signed-off-by:
-
Nikolay Aleksandrov authored
Using raw values makes it difficult to extend and also understand the code, give them names and do explicit per-option manipulation in br_multicast_set_port_router. Signed-off-by:
-
Vivien Didelot authored
When a user explicitly requests VLAN filtering with something like: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. Add support for it in the DSA layer with a new port_vlan_filtering function to let drivers toggle 802.1Q filtering on user demand. Signed-off-by:Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Jiri Pirko authored
Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
John Fastabend authored
In the initial implementation the only way to stop a rule from being inserted into the hardware table was via the device feature flag. However this doesn't work well when working on an end host system where packets are expect to hit both the hardware and software datapaths. For example we can imagine a rule that will match an IP address and increment a field. If we install this rule in both hardware and software we may increment the field twice. To date we have only added support for the drop action so we have been able to ignore these cases. But as we extend the action support we will hit this example plus more such cases. Arguably these are not even corner cases in many working systems these cases will be common. To avoid forcing the driver to always abort (i.e. the above example) this patch adds a flag to add a rule in software only. A careful user can use this flag to build software and hardware datapaths that work together. One example we have found particularly useful is to use hardware resources to set the skb->mark on the skb when the match may be expensive to run in software but a mark lookup in a hash table is cheap. The idea here is hardware can do in one lookup what the u32 classifier may need to traverse multiple lists and hash tables to compute. The flag is only passed down on inserts. On deletion to avoid stale references in hardware we always try to remove a rule if it exists. The flags field is part of the classifier specific options. Although it is tempting to lift this into the generic structure doing this proves difficult do to how the tc netlink attributes are implemented along with how the dump/change routines are called. There is also precedence for putting seemingly generic pieces in the specific classifier options such as TCA_U32_POLICE, TCA_U32_ACT, etc. So although not ideal I've left FLAGS in the u32 options as well as it simplifies the code greatly and user space has already learned how to manage these bits ala 'tc' tool. Another thing if trying to update a rule we require the flags to be unchanged. This is to force user space, software u32 and the hardware u32 to keep in sync. Thanks to Simon Horman for catching this case. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
-
John Fastabend authored
The offload decision was originally very basic and tied to if the dev implemented the appropriate ndo op hook. The next step is to allow the user to more flexibly define if any paticular rule should be offloaded or not. In order to have this logic in one function lift the current check into a helper routine tc_should_offload(). Signed-off-by:
-
Paolo Abeni authored
This patch implements bookkeeping support to compute the maximum headroom for all the devices in each datapath. When said value changes, the underlying devs are notified via the ndo_set_rx_headroom method. This also increases the internal vports xmit performance. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
On bridge needed_headroom changes, the enslaved devices are notified via the ndo_set_rx_headroom method Signed-off-by:
-
- Feb 29, 2016
-
-
WANG Cong authored
Similarly, we need to update backlog too when we update qlen. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
WANG Cong authored
We saw qlen!=0 but backlog==0 on our production machine: qdisc htb 1: dev eth0 root refcnt 2 r2q 10 default 1 direct_packets_stat 0 ver 3.17 Sent 172680457356 bytes 222469449 pkt (dropped 0, overlimits 123575834 requeues 0) backlog 0b 72p requeues 0 The problem is we only count qlen for HTB qdisc but not backlog. We need to update backlog too when we update qlen, so that we can at least know the average packet length. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
WANG Cong authored
When the bottom qdisc decides to, for example, drop some packet, it calls qdisc_tree_decrease_qlen() to update the queue length for all its ancestors, we need to update the backlog too to keep the stats on root qdisc accurate. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
WANG Cong authored
Remove nearly duplicated code and prepare for the following patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
Simon Wunderlich authored
Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Lüssing authored
Lists all neighbours detected by the Echo Locating Protocol (ELP) and their throughput metric. Initially Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com>
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
Signed-off-by:
-
Antonio Quartulli authored
In case of an unused wireless link, the mac80211 throughput estimation won't get updated further. Consequently, the reported throughput metric will become obsolete. With this patch unicast sampling is introduced by periodically sending unicast ELP packets to each neighbor on idle WiFi links. These sampling packets will fill an entire frame, so that the measurement is as reliable as possible Signed-off-by:
-
Antonio Quartulli authored
In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by:
-
Antonio Quartulli authored
To enable ELP to send probing packets over wireless links only if needed, batman-adv must keep track of the last time it sent a unicast packet towards every neighbour. For this purpose a 2 main changes are introduced: 1) a new member of the elp_neigh_node structure stores the last time a unicast packet was sent towards this neighbour; 2) a wrapper function for sending unicast packets is implemented. This function will simply update the member describe din point 1) and then forward the packet to the real sending routine. Point 2) implies that any code-path leading to a unicast sending now has to use the new wrapper. Signed-off-by:
-
Antonio Quartulli authored
This attribute is exported to user space to disable the link throughput auto-detection by setting a fixed value. The throughput override value is used when batman-adv is computing the link throughput towards a neighbour. If the value is set to 0 then batman-adv will try to detect the throughput by itself. Signed-off-by:
-
Antonio Quartulli authored
Add the support for recognising new originators in the network and rebroadcast their OGMs. Signed-off-by:
-
Antonio Quartulli authored
This is the initial implementation of the new OGM protocol (version 2). It has been designed to work on top of the newly added ELP. In the previous version the OGM protocol was used to both measure link qualities and flood the network with the metric information. In this version the protocol is in charge of the latter task only, leaving the former to ELP. This means being able to decouple the interval used by the neighbor discovery from the OGM broadcasting, which revealed to be costly in dense networks and needed to be relaxed so leading to a less responsive routing protocol. Signed-off-by:
-
Linus Lüssing authored
This parameter can be set individually on each interface and allows the configuration of the elp interval for the link quality measurements during runtime. Usually it is desirable to set it to a higher (= slower) value on interfaces which have a more static characteristic (e.g. wired interfaces) or very dense neighbourhoods to reduce overhead. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by:
-
Linus Lüssing authored
Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by:
-
Linus Lüssing authored
The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by:
-
