-  change to limit dnsmasq_host file permissions to read access to
   other users.

Change-Id: Ifab7ca819ae3b03b2da973629cb7c08b82a0c705

This reverts commit 4297aee5.

Reason for revert: PF failures for other SIs

Change-Id: I84f5bd0e44836e1f9f7c75966b7f3a8c3f280610

Remove iperf 3.1.3 from meta-qti-data for compilation

- Changes to add resolve tag for type-vlan force1&2.

Change-Id:  I6a248f3a08a86f91c703a05b782db4d1e34901c1

* update stop dnsmasq service from version 2.79 to 2.83

Change-Id: I8eea0fc7355b5ec9ff042665afa9eaafcf3b5e89

Change-Id: Ia8b1f1b8a2e0a5907a1722b029985551502148e5
Signed-off-by: Dheeraj Kumar <quic_dhekum@quicinc.com>
Acked-by: Nandi Srinivas <snandi@qti.qualcomm.com>

Change-Id: I2d8b1bc37c0d8f84cd76aff0b695e2156f5099be

Change-Id: I8d16d3a13cf274e01f194c7775ec90e7eb19fd6c
Signed-off-by: Ambika Pavan <quic_apavan@quicinc.com>

* add a shell script to fix the resolve file is missing for non-defauflt PDN.

Change-Id: I1de3b37893a5627ec82f20e0d66156b22878973a

* change the code to fix the dnsmasq service stopping in a inproper way issue

Change-Id: If63f60df1e892583abb814533da4fb4e6644af46

-dnsmasq use user "nobody" may cause security issue
-add "--user=radio --group=radio"

Change-Id: I046fd8890ca377127487a94e0dd2c3089f9b2211

Set ip link with qvlan_pcp for IPv6 qip_type.
Write qvlan_pcp to /dev/emac for IPv6 so emac driver can get it.

Change-Id: Ie7caf61219e56f84f24e36ad185dc084984462f4

Use separate service files for SA8195P as it has no /dev/emac node.

Change-Id: I874c2fab65eb21a413cdf81bd347b4cd771c99ca

Enable eth-adaption-layer only for telematics machine image.

Change-Id: Ic25bb6b92c985f646e3b0d821903036beeae9d6e

Adding support for SA8195P LV VM.

Change-Id: I39301ee4a52056bbd20c39dde7ecaa4a7d68778a

Update eth-adaption-layer for SA8195p GVM.

Change-Id: Ieda517523ca4306dcffa44ceeb74252092f43544

create /run/data/monitor folder to monitor ipacmd.pid file
by softap to get notification when ipacm is restarted.

Change-Id: I4d1a51a43e5b6b33134fe3f68d28ce3d057ab55c

ipacmd.pid should be updated after ipacm has received
cached event from driver. Remove monitor of ipacmd.pid
file from service file and update the file once ipacm
received driver cached event after restart.

Change-Id: I09f0a5b98c7a7580647d45336ceeb59585c9791b

When jumbo mtu is configured for eth0 interface,
all eth0 vlan interfaces get the same mtu as eth0.
Explicitly set qoe vlan interface mtu to default value
as we don't support jumbo frame in the interface.

Change-Id: Icd951033b51c2103665054a321390d65398f5c69
Acked-by: Ning Cai <ncai@qti.qualcomm.com>
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

NAND has a limited life-time, which is determined by the frequency of
write/erase operations. we are reducing the write operation for
ipacm related file. Moving the file creation from tempfiles.conf
to bitbake.

Change-Id: I35da318958ced886dcb9de8af6a6ed4317fe42e5
Signed-off-by: Rishabh Garg <rishgarg@qti.qualcomm.com>

Add support ipacm restart feature systemd.

Change-Id: I394be2969b5c8aff90f9ddbbedeff9a059d3a382

* Add resolv.conf files for on-demand bridges

Change-Id: I9eaa53839d29575345b73e8d0a14c07a408a4f97

Make sure that emac and ethernet adaption service files
are executed only for eth targets.

Acked-by: Abhishek Chauhan <abchauha@qti.qualcomm.com>
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

Allow emac.sh to be run as radio for user and group permissions.
This allows emac.sh to properly write to and open /dev/emac node with
SELinux enabled on MDM devices.

Change-Id: Ib0a3514c1a61be0e294000f6e8e0a0eb1e48fb76
Signed-off-by: Manuel Gomez <gomez@codeaurora.org>

Adding platform version for enabling SA2145P.

Change-Id: I655a74954efc6feb4bd5702c1a9f30a1f1e3eb69

Allow the NAND option to be read when getting device information
from VT target.

Change-Id: I5b79bb84724d0c0a385aa2e53e3688f387b03dc8
Signed-off-by: Manuel Gomez <gomez@codeaurora.org>

Make sure we add vlan priority bases configuration to support
priority based routing in EMAC.

Change-Id: I5ed5af1b46aa15b88720e6ad7bd69cddb7b14dfa
Acked-by: Abhishek Chauhan <abchauha@qti.qualcomm.com>
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

Add support to get BASEPRODUCT to apply
the changes only for auto targets

Change-Id: I53431e9ed48b9922b21413cbd85dd500890a2e9d

Make sure we add vconfig rules on the switch to route packets from
modem to application processor.

Change-Id: I5e610d9caa5b7df0c5704601ca7b87050662d806

Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

Remove usage of banned word from config.ini.

Signed-off-by: Sneh Shah <snehshah@codeaurora.org>
Change-Id: Ifedb883f7edbbbe3e77128e9d8928101d556e1d5

Ethernet adaption module script to be inserted at bootup and when
vlan interface is up.
Revision-2 changes for optimisation and enhancements.
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

Change-Id: Ib5731d3d87c8938af23df4c5db29ab260827a7c1

Ethernet adaption module script to be inserted at bootup and when
vlan interface is up.

Revison1: Pick revision2 for optimisation and enhancements.

Change-Id: I2a7592de16953736df2435215913026710dd2f2d
Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>

bitbake support to install files for stmmac.

Remove emac_dwc_eqos from devices which support stmmac.

Signed-off-by: Sunil Paidimarri <hisunil@codeaurora.org>