Tags

Tags give the ability to mark specific points in history as being important

sent/topic/sm8550/upstream/ucsi-no-pdos-v1

b8f14d9c · usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices · Feb 23, 2024

(no cover subject)

To: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:  <linux-usb@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices

 drivers/usb/typec/ucsi/ucsi_glink.c | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: 33e1d31873f87d119e5120b88cd350efa68ef276
change-id: 20240223-topic-sm8550-upstream-ucsi-no-pdos-62fdad669f90

Best regards,

sent/topic/sm8650/upstream/hdk-v1

59846923 · arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay · Feb 23, 2024

arm64: qcom: sm8650: add support for the SM8650-HDK board

The SM8650-HDK is an embedded development platforms for the
Snapdragon 8 Gen 3 SoC aka SM8650, with the following features:
- Qualcomm SM8650 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
- For Camera, Sensors and external Display cards
- Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

An optional Display Card kit can be connected on top,
an overlay is handled to add support for the DSI Display
and Touch Controller.

Dependencies: None

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (3):
      dt-bindings: arm: qcom: Document the HDK8650 board
      arm64: dts: qcom: sm8650: add support for the SM8650-HDK board
      arch: arm64: dts: sm8650-hdk: add support for the Display Card overlay

 Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    5 +
 .../boot/dts/qcom/sm8650-hdk-display-card.dtso     |  151 +++
 arch/arm64/boot/dts/qcom/sm8650-hdk.dts            | 1259 ++++++++++++++++++++
 4 files changed, 1416 insertions(+)
---
base-commit: 33e1d31873f87d119e5120b88cd350efa68ef276
change-id: 20240223-topic-sm8650-upstream-hdk-e21cfd6f1de8

Best regards,

sent/topic/sm8650/gpu-v3

be641d32 · arm64: dts: qcom: sm8650-qrd: enable GPU · Feb 16, 2024

drm/msm: Add support for the A750 GPU found on the SM8650 platform

Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.

The missing registers are added in the a6xx.xml.h file that would
require a subsequent sync and the non-existent hwcfg is handled
in a6xx_set_hwcg().

The A750 GPU info are added under the adreno_is_a750() macro and
the ADRENO_7XX_GEN3 family id.

This adds:
- the GMU and SMMU bindings
- DRM driver changes
- DT nodes

Dependencies: None

Tested using Mesa's !26934 Merge Request [0] on the SM8650-QRD
and with kmscube & vkcube to test basic rendering.

[0] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26934

To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: Marijn Suijten <marijn.suijten@somainline.org>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Will Deacon <will@kernel.org>
To: Robin Murphy <robin.murphy@arm.com>
To: Joerg Roedel <joro@8bytes.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <dri-devel@lists.freedesktop.org>
Cc:  <freedreno@lists.freedesktop.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Cc:  <iommu@lists.linux.dev>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Fixed smmu bindings if condition for GMU smmu
- Collected reviews
- Link to v2: https://lore.kernel.org/r/20240215-topic-sm8650-gpu-v2-0-6be0b4bf2e09@linaro.org

Changes in v2:
- Added separate a6xx.xml.h sync from https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27576
- Collected review tags
- Inlined skip_programming
- Use A7XX_RBBM_CGC_P2S_STATUS_TXDONE instead of BIT(0)
- Drop now useless placeholder comment
- Removed interconnect properties
- Rebased on current linux-next
- Link to v1: https://lore.kernel.org/r/20240212-topic-sm8650-gpu-v1-0-708a40b747b5@linaro.org

---
Neil Armstrong (7):
      dt-bindings: display/msm/gmu: Document Adreno 750 GMU
      dt-bindings: arm-smmu: fix SM8[45]50 GPU SMMU if condition
      dt-bindings: arm-smmu: Document SM8650 GPU SMMU
      drm/msm/a6xx: Add missing regs for A750
      drm/msm: add support for A750 GPU
      arm64: dts: qcom: sm8650: add GPU nodes
      arm64: dts: qcom: sm8650-qrd: enable GPU

 .../devicetree/bindings/display/msm/gmu.yaml       |   1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml        |  17 ++-
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts            |   8 +
 arch/arm64/boot/dts/qcom/sm8650.dtsi               | 166 +++++++++++++++++++++
 drivers/gpu/drm/msm/adreno/a6xx.xml.h              |   9 ++
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              |   2 +
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  28 +++-
 drivers/gpu/drm/msm/adreno/adreno_device.c         |  14 ++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h            |  10 +-
 9 files changed, 247 insertions(+), 8 deletions(-)
---
base-commit: 2c3b09aac00d7835023bbc4473ee06696be64fa8
change-id: 20240208-topic-sm8650-gpu-489d5e2c2b17

Best regards,

sent/topic/sm8650/gpu-v2

389a2362 · arm64: dts: qcom: sm8650-qrd: enable GPU · Feb 15, 2024

drm/msm: Add support for the A750 GPU found on the SM8650 platform

Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.

The missing registers are added in the a6xx.xml.h file that would
require a subsequent sync and the non-existent hwcfg is handled
in a6xx_set_hwcg().

The A750 GPU info are added under the adreno_is_a750() macro and
the ADRENO_7XX_GEN3 family id.

This adds:
- the GMU and SMMU bindings
- DRM driver changes
- DT nodes

Dependencies: None

Tested using Mesa's !26934 Merge Request [0] on the SM8650-QRD
and with kmscube & vkcube to test basic rendering.

[0] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26934

To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: Marijn Suijten <marijn.suijten@somainline.org>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Will Deacon <will@kernel.org>
To: Robin Murphy <robin.murphy@arm.com>
To: Joerg Roedel <joro@8bytes.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <dri-devel@lists.freedesktop.org>
Cc:  <freedreno@lists.freedesktop.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Cc:  <iommu@lists.linux.dev>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Added separate a6xx.xml.h sync from https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27576
- Collected review tags
- Inlined skip_programming
- Use A7XX_RBBM_CGC_P2S_STATUS_TXDONE instead of BIT(0)
- Drop now useless placeholder comment
- Removed interconnect properties
- Rebased on current linux-next
- Link to v1: https://lore.kernel.org/r/20240212-topic-sm8650-gpu-v1-0-708a40b747b5@linaro.org

---
Neil Armstrong (6):
      dt-bindings: display/msm/gmu: Document Adreno 750 GMU
      dt-bindings: arm-smmu: Document SM8650 GPU SMMU
      drm/msm/a6xx: Add missing regs for A750
      drm/msm: add support for A750 GPU
      arm64: dts: qcom: sm8650: add GPU nodes
      arm64: dts: qcom: sm8650-qrd: enable GPU

 .../devicetree/bindings/display/msm/gmu.yaml       |   1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml        |   7 +-
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts            |   8 +
 arch/arm64/boot/dts/qcom/sm8650.dtsi               | 166 +++++++++++++++++++++
 drivers/gpu/drm/msm/adreno/a6xx.xml.h              |   9 ++
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              |   2 +
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  28 +++-
 drivers/gpu/drm/msm/adreno/adreno_device.c         |  14 ++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h            |  10 +-
 9 files changed, 238 insertions(+), 7 deletions(-)
---
base-commit: 5a30f6bdb84228f160b331eed2ccfde00bfb3ab4
change-id: 20240208-topic-sm8650-gpu-489d5e2c2b17

Best regards,

sent/topic/sm8650/gpu-v1

d1a4e130 · arm64: dts: qcom: sm8650-qrd: enable GPU · Feb 12, 2024

drm/msm: Add support for the A750 GPU found on the SM8650 platform

Unlike the the very close A740 GPU on the SM8550 SoC, the A750 GPU
doesn't have an HWCFG block but a separate register set.

The missing registers are added in the a6xx.xml.h file that would
require a subsequent sync and the non-existent hwcfg is handled
in a6xx_set_hwcg().

The A750 GPU info are added under the adreno_is_a750() macro and
the ADRENO_7XX_GEN3 family id.

This adds:
- the GMU and SMMU bindings
- DRM driver changes
- DT nodes

Dependencies: None

Tested using Mesa's !26934 Merge Request [0] on the SM8650-QRD
and with kmscube & vkcube to test basic rendering.

[0] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26934

To: Rob Clark <robdclark@gmail.com>
To: Abhinav Kumar <quic_abhinavk@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Sean Paul <sean@poorly.run>
To: Marijn Suijten <marijn.suijten@somainline.org>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Will Deacon <will@kernel.org>
To: Robin Murphy <robin.murphy@arm.com>
To: Joerg Roedel <joro@8bytes.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <dri-devel@lists.freedesktop.org>
Cc:  <freedreno@lists.freedesktop.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Cc:  <iommu@lists.linux.dev>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (5):
      dt-bindings: display/msm/gmu: Document Adreno 750 GMU
      dt-bindings: arm-smmu: Document SM8650 GPU SMMU
      drm: msm: add support for A750 GPU
      arm64: dts: qcom: sm8650: add GPU nodes
      arm64: dts: qcom: sm8650-qrd: enable GPU

 .../devicetree/bindings/display/msm/gmu.yaml       |   1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml        |   7 +-
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts            |   8 +
 arch/arm64/boot/dts/qcom/sm8650.dtsi               | 169 +++++++++++++++++++++
 drivers/gpu/drm/msm/adreno/a6xx.xml.h              |   8 +
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              |   2 +
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  29 +++-
 drivers/gpu/drm/msm/adreno/adreno_device.c         |  14 ++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h            |   9 +-
 9 files changed, 241 insertions(+), 6 deletions(-)
---
base-commit: 84baf172e2fa30d6d6d0fb8ed076b47e836b74f1
change-id: 20240208-topic-sm8650-gpu-489d5e2c2b17

Best regards,

sent/amlogic/v6.8/upstream/dsi-ccf-vim3-v10

471681f7 · arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper · Feb 05, 2024

drm/meson: add support for MIPI DSI Display

The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
glue on the same Amlogic SoCs.

This is a follow-up of v5  now the DRM patches are applied, the clk & DT changes
remains for a full DSI support on G12A & SM1 platforms.

The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
pixel reader by the VCLK2 clock using the HDMI PLL.

The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.

An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.

The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
path for DSI in preparation of full CCF support and possibly dual display with HDMI.

The change from v5 is that now we use a "VCLK" driver instead of notifier and rely
on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.

To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Kevin Hilman <khilman@baylibre.com>
To: Jerome Brunet <jbrunet@baylibre.com>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: David Airlie <airlied@gmail.com>
To: Daniel Vetter <daniel@ffwll.ch>
To: Nicolas Belin <nbelin@baylibre.com>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-amlogic@lists.infradead.org>
Cc:  <linux-clk@vger.kernel.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Cc:  <dri-devel@lists.freedesktop.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v10:
- Rename regmap_vclk to meson_clk and add _gate for the gate
- Move COMMON_CLK_MESON_VCLK to following patch
- Remove CLK_SET_RATE_PARENT from g12a_vclk2_sel, keep it only on mipi_dsi_pxclk_sel
- Add more info on commit message to specify how clock setup is designed
- Remove forgotten CLK_IGNORE_UNUSED on g12a_vclk2_input
- Remove useless CLK_SET_RATE_PARENT on g12a_vclk2_div to stop propagatting rate _after_ vclk2_div
- Remove invalid CLK_SET_RATE_GATE on g12a_vclk2 since it's not a divider...
- Drop already applied patches
- move Khadas TS050 changes as an overlay
- Link to v9: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-0-95256ed139e6@linaro.org

Changes in v9:
- Colledte reviewed-bys
- Fixed patches 2 & 4, commit messages and bindings format
- Link to v8: https://lore.kernel.org/r/20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org

Changes in v8:
- Switch vclk clk driver to parm as requested by Jerome
- Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
- Fixed DT errors in vim3 example and MNT Reform DT
- Rebased on next-20231107, successfully tested on VIM3L
- Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org

Changes in v7:
- Added review tags
- Fixed patch 5 thanks to George
- Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org

Changes in v6:
- dropped applied DRM patches
- dropped clk private prefix patches
- rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a@linaro.org
- re-ordered/cleaned ENCL patches to match clkid public migration
- Added new "vclk" driver
- uses vclk driver instead of notifier
- cleaned VCLK2 clk flags
- add px_clk gating from DSI driver
- Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org

Changes in v5:
- Aded PRIV all the G12 internal clk IDS to simplify public exposing
- Fixed the DSI bindings
- Fixed the DSI HSYNC/VSYNC polarity handling
- Fixed the DSI clock setup
- Fixed the DSI phy timings
- Dropped components for DSI, only keeping it for HDMI
- Added MNT Reform 2 CM4 DT
- Dropped already applied PHY fix
- Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org

Changes from v3 at [3]:
- switched all clk setup via CCF
- using single PLL for DSI controller & ENCL encoder
- added ENCL clocks to CCF
- make the VCLK2 clocks configuration by CCF
- fixed probe/bind of DSI controller to work with panels & bridges
- added bit_clk to controller to it can setup the BIT clock aswell
- added fix for components unbind
- added fix for analog phy setup value
- added TS050 timings fix
- dropped previous clk control patch

Changes from v2 at [2]:
- Fixed patch 3
- Added reviews from Jagan
- Rebased on v5.19-rc1

Changes from v1 at [1]:
- fixed DSI host bindings
- add reviewed-by tags for bindings
- moved magic values to defines thanks to Martin's searches
- added proper prefixes to defines
- moved phy_configure to phy_init() dw-mipi-dsi callback
- moved phy_on to a new phy_power_on() dw-mipi-dsi callback
- correctly return phy_init/configure errors to callback returns

[1] https://lore.kernel.org/r/20200907081825.1654-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20220120083357.1541262-1-narmstrong@baylibre.com
[3] https://lore.kernel.org/r/20220617072723.1742668-1-narmstrong@baylibre.com

---
Neil Armstrong (7):
      dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
      clk: meson: add vclk driver
      clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
      drm/meson: gate px_clk when setting rate
      arm64: meson: g12-common: add the MIPI DSI nodes
      arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
      arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper

 Documentation/devicetree/bindings/arm/amlogic.yaml |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   4 +
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |  70 ++++
 .../meson-g12b-bananapi-cm4-mnt-reform2.dts        | 384 +++++++++++++++++++++
 .../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso  | 108 ++++++
 drivers/clk/meson/Kconfig                          |   5 +
 drivers/clk/meson/Makefile                         |   1 +
 drivers/clk/meson/g12a.c                           |  72 ++--
 drivers/clk/meson/vclk.c                           | 141 ++++++++
 drivers/clk/meson/vclk.h                           |  51 +++
 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c          |   7 +
 11 files changed, 824 insertions(+), 20 deletions(-)
---
base-commit: 23e11d0318521e8693459b0e4d23aec614b3b68b
change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a

Best regards,

sent/topic/sm8x50/upstream/goodix-spi-defconfig-v1

5b898182 · arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module · Feb 03, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: 076d56d74f17e625b3d63cf4743b3d7d02180379
change-id: 20240203-topic-sm8x50-upstream-goodix-spi-defconfig-5b69c3e9f61f

Best regards,

sent/topic/sm8550/upstream/qrd8550-touch-v1

e6480d9a · arm64: dts: qcom: sm8550-qrd: enable Touchscreen · Jan 31, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      arm64: dts: qcom: sm8550-qrd: enable Touchscreen

 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 42 +++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
---
base-commit: 06f658aadff0e483ee4f807b0b46c9e5cba62bfa
change-id: 20240131-topic-sm8550-upstream-qrd8550-touch-a59df5250c07

Best regards,

sent/topic/goodix-berlin/upstream/initial-v15

3bf4e210 · Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC · Jan 29, 2024

Input: add initial support for Goodix Berlin touchscreen IC

These touchscreen ICs support SPI, I2C and I3C interface, up to
10 finger touch, stylus and gestures events.

This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550/SM8650 MTP & QRD touch panel.

The current implementation only supports BerlinD, aka GT9916.

Support for advanced features like:
- Firmware & config update
- Stylus events
- Gestures events
- Previous revisions support (BerlinA or BerlinB)
is not included in current version.

The current support will work with currently flashed firmware
and config, and bail out if firmware or config aren't flashed yet.

[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers

To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Jeff LaBundy <jeff@labundy.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v15:
- Applied changes/cleanups/fixes provided by Dmitry:
  - Cleanup status/offsets defines, move in to structs
  - Remove packed attribute when not needed
  - Refactor touch data & header structs
  - Store event into goodix_berlin_core
  - simplify goodix_berlin_checksum_valid()
  - simplify goodix_berlin_convert_ic_info() with macro
  - simplify back-and-forth reads with goodix_berlin_get_remaining_contacts()
  - simplify goodix_berlin_touch_handler()
  - cleanup buffer handling comment
  - clear up status field in case of checksum error
- Link to v14: https://lore.kernel.org/r/20231221-topic-goodix-berlin-upstream-initial-v14-0-04459853b640@linaro.org

Changes in v14:
- Rebased on next-20231221
- Fixed build on SPI/I2S drivers missing <linux/input.h> include
- Link to v13: https://lore.kernel.org/r/20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org

Changes in v13:
- Thanks to Dmitry's suggestion:
  - Move core defines and structs into goodix_berlin_core.c
  - Comments typos and rephrasings
  - Identation fixes
  - Refactor of goodix_berlin_power_on
  - goodix_berlin_get_ic_info move to __free(kfree) to avoid leaking
- Added comment explaining how data is retrieved in irq handler
- Link to v12: https://lore.kernel.org/r/20231209-topic-goodix-berlin-upstream-initial-v12-0-eaffaeb53fb5@linaro.org

Changes in v12:
- Rebased on next-20231208
- Link to v11: https://lore.kernel.org/r/20231106-topic-goodix-berlin-upstream-initial-v11-0-5c47e9707c03@linaro.org

Changes in v11:
- Fixes according to Jeff's review:
 - s/dev_info/dev_err/ in goodix_berlin_get_ic_info()
 - remove spurious return instead of goto in goodix_berlin_get_ic_info()
 - added back dropped msleep() in goodix_berlin_request_handle_reset()
- Link to v10: https://lore.kernel.org/r/20231023-topic-goodix-berlin-upstream-initial-v10-0-88eec2e51c0b@linaro.org

Changes in v10:
- Fix according to Dmitry's review:
 - move goodix_berlin_get_ic_info() afe_data to heap
 - merge the goodix_berlin_parse_finger() loops and skip invalid fingers instead of returning
 - remove unwanted goodix_berlin_touch_handler() "static" for buffer
 - only call goodix_berlin_request_handle_reset() if gpio was provided
 - use "error = func(); if(error) return error;" instead of "return func()" when function handles multiple error cases
- Link to v9: https://lore.kernel.org/r/20231021-topic-goodix-berlin-upstream-initial-v9-0-13fb4e887156@linaro.org

Changes in v9:
- Rebased on next-20231020
- Link to v8: https://lore.kernel.org/r/20231003-topic-goodix-berlin-upstream-initial-v8-0-171606102ed6@linaro.org

Changes in v8:
- Add missing bitfield.h include in core
- Link to v7: https://lore.kernel.org/r/20231002-topic-goodix-berlin-upstream-initial-v7-0-792fb91f5e88@linaro.org

Changes in v7:
- rebased on v6.6-rc3
- Link to v6: https://lore.kernel.org/r/20230912-topic-goodix-berlin-upstream-initial-v6-0-b4ecfa49fb9d@linaro.org

Changes in v6:
- rebased on v6.6-rc1
- changed commit message prefix to match the other Input commits
- Link to v5: https://lore.kernel.org/r/20230801-topic-goodix-berlin-upstream-initial-v5-0-079252935593@linaro.org

Changes in v5:
- rebased on next-20230801
- Link to v4: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v4-0-0947c489be17@linaro.org

Changes in v4:
- Core updates:
 - drop kconfig depends, deps will be handled by _SPI and _I2C
 - change power_on() error labels
 - print errors on all dev_err() prints
 - remove useless default variable initialization
 - switch irq touch checksum error to dev_err()
 - add Jeff's review tag
- I2C changes
 - change REGMAP_I2C Kconfig from depends to select
 - add Jeff's review tag
- SPI changes
 - add select REGMAP to Kconfig
 - added GOODIX_BERLIN_ prefix to defines
 - switched from ret to error
 - add Jeff's review tag
- Link to v3: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v3-0-f0577cead709@linaro.org

Changes in v3:
- Another guge cleanups after Jeff's review:
 - appended goodix_berlin_ before all defines
 - removed some unused defines
 - removed retries on most of read functions, can be added back later
 - added __le to ic_info structures
 - reworked and simplified irq handling, dropped enum and ts_event structs
 - added struct for touch data
 - simplified and cleaned goodix_berlin_check_checksum & goodix_berlin_is_dummy_data
 - moved touch_data_addr to the end of the main code_data
 - reworked probe to get_irq last and right before setip input device
 - cleaned probe by removing the "cd->dev"
 - added short paragraph to justify new driver for berlin devices
 - defined all offsets & masks
- Added bindings review tag
- Link to v2: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v2-0-26bc8fe1e90e@linaro.org

Changes in v2:
- Huge cleanups after Jeff's review:
 - switch to error instead of ret
 - drop dummy vendor/product ids
 - drop unused defined/enums
 - drop unused ic_info and only keep needes values
 - cleanup namings and use goodix_berlin_ everywhere
 - fix regulator setup
 - fix default variables value when assigned afterwars
 - removed indirections
 - dropped debugfs
 - cleaned input_dev setup
 - dropped _remove()
 - sync'ed i2c and spi drivers
- fixed yaml bindings
- Link to v1: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v1-0-4a0741b8aefd@linaro.org

---
Neil Armstrong (4):
      dt-bindings: input: document Goodix Berlin Touchscreen IC
      Input: add core support for Goodix Berlin Touchscreen IC
      Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
      Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC

 .../bindings/input/touchscreen/goodix,gt9916.yaml  |  95 +++
 drivers/input/touchscreen/Kconfig                  |  31 +
 drivers/input/touchscreen/Makefile                 |   3 +
 drivers/input/touchscreen/goodix_berlin.h          |  24 +
 drivers/input/touchscreen/goodix_berlin_core.c     | 755 +++++++++++++++++++++
 drivers/input/touchscreen/goodix_berlin_i2c.c      |  75 ++
 drivers/input/touchscreen/goodix_berlin_spi.c      | 178 +++++
 7 files changed, 1161 insertions(+)
---
base-commit: 596764183be8ebb13352b281a442a1f1151c9b06
change-id: 20230606-topic-goodix-berlin-upstream-initial-ba97e8ec8f4c

Best regards,

sent/topic/sm8650/upstream/pcie-its-v1

4a4c0c0a · arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1 · Jan 25, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1

 arch/arm64/boot/dts/qcom/sm8650.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240125-topic-sm8650-upstream-pcie-its-94572c7f1a73

Best regards,

sent/topic/sm8650/upstream/audio-dt-v1

301dd462 · arm64: defconfig: enable audio drivers for SM8650 QRD board · Jan 25, 2024

arm64: qcom: sm8650: enable Audio on MTP and QRD

Add the remaining Audio nodes on the SM8650-QRD & MTP boards including:
- Qualcomm Aqstic WCD9395 audio codec on the RX & TX Soundwire interfaces
- WSA8845 Left & Right Speakers
- Link the WCD9395 Codec node to the WCD9395 USB SubSystem node to handle
  the USB-C Audio Accessory Mode events & lane swapping
- Sound card with routing for Speakers and Microphones

Finally enable the missing modules in arm64 defconfig now
the WCD939x codec driver has been applied.

Dependencies:
- altmode: https://lore.kernel.org/all/20240123-topic-sm8650-upstream-altmode-v3-0-300a5ac80e1e@linaro.org/

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (3):
      arm64: dts: qcom: sm8650-qrd: add Audio nodes
      arm64: dts: qcom: sm8650-mtp: add Audio sound card node
      arm64: defconfig: enable audio drivers for SM8650 QRD board

 arch/arm64/boot/dts/qcom/sm8650-mtp.dts |  23 ++++
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 203 ++++++++++++++++++++++++++++++++
 arch/arm64/configs/defconfig            |   3 +
 3 files changed, 229 insertions(+)
---
base-commit: 63be584a33c3c63114aa3866f7cbcb45fa751e60
change-id: 20240125-topic-sm8650-upstream-audio-dt-1daca65777ba

Best regards,

sent/topic/sm8650/upstream/altmode-v3

876f4a3d · arm64: defconfig: enable WCD939x USBSS driver as module · Jan 23, 2024

arm64: qcom: sm8650: add support for USB-C Altmode

This adds the missing bits to support Display Port external
display over the USB-C Altmode support using the Redriver/Retimer
and WCD939x USBSS Mux/Switch to provide the correct switching.

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Catalin Marinas <catalin.marinas@arm.com>
To: Will Deacon <will@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Cc:  <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v3:
- rebased on v6.8-rc1
- Link to v2: https://lore.kernel.org/r/20231219-topic-sm8650-upstream-altmode-v2-0-a608528864a3@linaro.org

Changes in v2:
- replaced "ok" by "okay"
- Link to v1: https://lore.kernel.org/r/20231218-topic-sm8650-upstream-altmode-v1-0-7900660693cf@linaro.org

---
Neil Armstrong (2):
      arm64: dts: qcom: sm8650-qrd: add USB-C Altmode Support
      arm64: defconfig: enable WCD939x USBSS driver as module

 arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 104 +++++++++++++++++++++++++++++++-
 arch/arm64/configs/defconfig            |   1 +
 2 files changed, 103 insertions(+), 2 deletions(-)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20231218-topic-sm8650-upstream-altmode-3ee141fdccff

Best regards,

sent/topic/sm8550/upstream/hdk8550-v2

dc900c2d · arm64: dts: qcom: sm8550: add support for the SM8550-HDK board · Jan 23, 2024

arm64: qcom: sm8550: add support for the SM8550-HDK board

The SM8550-HDK is an embedded development platforms for the
Snapdragon 8 Gen 2 SoC aka SM8550, with the following features:
- Qualcomm SM8550 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
- For Camera, Sensors and external Display cards
- Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

On-Board PMICs:
- PMK8550 2.1
- PM8550 2.0
- PM8550VS 2.0 x4
- PM8550VE 2.0
- PM8550B 2.0
- PMR735D 2.0
- PM8010 1.1 x2

Product Page: [3]

Dependencies: None

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard
[3] https://www.lantronix.com/products/snapdragon-8-gen-2-mobile-hardware-development-kit/

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- Fixed ordering in bindings
- fixed typo and spurious blank line in patch 2
- Collected Reviewed-by
- Link to v1: https://lore.kernel.org/r/20240122-topic-sm8550-upstream-hdk8550-v1-0-bff7eb3a17eb@linaro.org

---
Neil Armstrong (2):
      dt-bindings: arm: qcom: Document the HDK8550 board
      arm64: dts: qcom: sm8550: add support for the SM8550-HDK board

 Documentation/devicetree/bindings/arm/qcom.yaml |    1 +
 arch/arm64/boot/dts/qcom/Makefile               |    1 +
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts         | 1290 +++++++++++++++++++++++
 3 files changed, 1292 insertions(+)
---
base-commit: 29a509493dd4da77c9109aa54cc4c145ca64ec23
change-id: 20240119-topic-sm8550-upstream-hdk8550-899e9137ed01

Best regards,

sent/topic/sm8650/upstream/remoteproc-v7

7f2157ff · arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss · Jan 23, 2024

remoteproc: qcom: Introduce DSP support for SM8650

Add the bindings and driver changes for DSP support on the
SM8650 platform in order to enable the aDSP, cDSP and MPSS
subsystems to boot.

Compared to SM8550, where SM8650 uses the same dual firmware files,
(dtb file and main firmware) the memory zones requirement has changed:
- cDSP: now requires 2 memory zones to be configured as shared
  between the cDSP and the HLOS subsystem
- MPSS: In addition to the memory zone required for the SM8550
  MPSS, two more are required to be configured for MPSS
  usage only.

In order to handle this and avoid code duplication, the region_assign_*
code patch has been made more generic and is able handle multiple
DSP-only memory zones (for MPSS) or DSP-HLOS shared memory zones (cDSP)
in the same region_assign functions.

Dependencies: None

For convenience, a regularly refreshed linux-next based git tree containing
all the SM8650 related work is available at:
https://git.codelinaro.org/neil.armstrong/linux/-/tree/topic/sm8650/upstream/integ

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v7:
- Rebased on v6.8-rc1
- Add another memory region for MPSS, in bindings, code and DT
  - Kepts Krzysztof's review on bindings after agreement on irc
  - Kept drivers patches reviews because it's only a miminal change (value 2 -> 3)
- Link to v6: https://lore.kernel.org/r/20231218-topic-sm8650-upstream-remoteproc-v6-0-3d16b37f154b@linaro.org

Changes in v6:
- Rebased on next-20231218, last patch did not apply anymore
- Link to v5: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-remoteproc-v5-0-e749a1a48268@linaro.org

Changes in v5:
- Rename _perms to _owners per Konrad suggestion
- Link to v4: https://lore.kernel.org/r/20231208-topic-sm8650-upstream-remoteproc-v4-0-a96c3e5f0913@linaro.org

Changes in v4:
- Collected review from Mukesh Ojha
- Fixed adsp_unassign_memory_region() as suggested by Mukesh Ojha
- Link to v3: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-remoteproc-v3-0-dbd4cabaeb47@linaro.org

Changes in v3:
- Collected bindings review tags
- Small fixes suggested by Mukesh Ojha
- Link to v2: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-remoteproc-v2-0-609ee572e0a2@linaro.org

Changes in v2:
- Fixed sm8650 entries in allOf:if:then to match Krzysztof's comments
- Collected reviewed-by on patch 3
- Link to v1: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-remoteproc-v1-0-a8d20e4ce18c@linaro.org

---
Neil Armstrong (4):
      dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
      remoteproc: qcom: pas: make region assign more generic
      remoteproc: qcom: pas: Add SM8650 remoteproc support
      arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss

 .../bindings/remoteproc/qcom,sm8550-pas.yaml       |  45 ++++++-
 arch/arm64/boot/dts/qcom/sm8650.dtsi               |   8 +-
 drivers/remoteproc/qcom_q6v5_pas.c                 | 150 ++++++++++++++++-----
 3 files changed, 167 insertions(+), 36 deletions(-)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20231016-topic-sm8650-upstream-remoteproc-66a87eeb6fee

Best regards,

sent/topic/sm8550/upstream/icc-sync-state-v1

ed3c6168 · interconnect: qcom: sm8550: Enable sync_state · Jan 23, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Georgi Djakov <djakov@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <linux-pm@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      interconnect: qcom: sm8550: Enable sync_state

 drivers/interconnect/qcom/sm8550.c | 1 +
 1 file changed, 1 insertion(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240123-topic-sm8550-upstream-icc-sync-state-70759959d3e2

Best regards,

sent/topic/sm8550/upstream/pcie-its-v2

a69e91e1 · arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1 · Jan 22, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v2:
- fixed commit msg
- Link to v1: https://lore.kernel.org/r/20240122-topic-sm8550-upstream-pcie-its-v1-1-aff5d0d7d6dd@linaro.org

---
Neil Armstrong (1):
      arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1

 arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240122-topic-sm8550-upstream-pcie-its-06f4b61dfe9d

Best regards,

sent/topic/sm8550/upstream/pcie-its-v1

b13f001d · arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1 · Jan 22, 2024

(no cover subject)

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1

 arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240122-topic-sm8550-upstream-pcie-its-06f4b61dfe9d

Best regards,

sent/topic/sm8650/upstream/qrd-fix-gpio-reserved-v1

d1a14dd0 · arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio · Jan 11, 2024

arm64: dts: qcom: sm8650: mark gpio74 as reserved

The TLMM gpio74 is also used to communicate with the secure NFC
on-board module, some variants of the SM8650 QRD & MTP boards requires
this GPIO to be dedicated to the secure firmware and set reserved
in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
On the other boards this GPIO is unused so it's still safe to mark
the GPIO as reserved.

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (2):
      arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
      arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio

 arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 2 +-
 arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
---
base-commit: bffdfd2e7e63175ae261131a620f809d946cf9a7
change-id: 20240111-topic-sm8650-upstream-qrd-fix-gpio-reserved-1c3d56c2d3e8

Best regards,

sent/topic/sm8x50/upstream/va-macro-bindings-fix-v1

01d1bb6c · ASoC: dt-bindings: qcom,lpass-va-macro: remove spurious contains in if statement · Dec 19, 2023

(no cover subject)

To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Banajit Goswami <bgoswami@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc:  <linux-arm-msm@vger.kernel.org>
Cc:  <alsa-devel@alsa-project.org>
Cc:  <linux-sound@vger.kernel.org>
Cc:  <devicetree@vger.kernel.org>
Cc:  <linux-kernel@vger.kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Neil Armstrong (1):
      ASoC: dt-bindings: qcom,lpass-va-macro: remove spurious contains in if statement

 Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
---
base-commit: aa4db8324c4d0e67aa4670356df4e9fae14b4d37
change-id: 20231219-topic-sm8x50-upstream-va-macro-bindings-fix-924ffff6ae31

Best regards,

sent/topic/sm8650/upstream/wcd939x-codec-v4

385bcaf2 · ASoC: codecs: Add WCD939x Codec driver · Dec 19, 2023

ASoC: codecs: add support for WCD939x Codec

Add the main WCD9390/WCD9395 Audio Codec driver to support:
- 4 ADC inputs for up to 5 Analog Microphones
- 4 DMIC inputs for up to 8 Digital Microphones
- 4 Microphone BIAS
- Stereo Headphone output
- Mono EAR output
- MBHC engine for Headset Detection

This adds:
- bindings
- MBHC changes to support Type-C muc
- Soundwire Slave driver
- Code driver

The USB Mux subsystem support will be submitted separalety
since it's a functionally separate subsystem connected over
I2C with it's own reset signal.

To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Banajit Goswami <bgoswami@quicinc.com>
To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Jaroslav Kysela <perex@perex.cz>
To: Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-sound@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

---
Changes in v4:
- Soundwire driver
 - Removed volatile/read-only registers from defaults list
 - Added a wcd939x_readable_register() with read-only + read-write registers, so cache does it's job
 - Added wcd939x_volatile_register() with only volatile registers
 - Fixed a probable but by not using devm_ from probe() otherwise it would be freed in component unbind
 - Fixed lifetime of the soundwire device, by setting it un forced suspend until component it bound
 - Used the component bind/unbind to control the runtime pm, avoiding soundwire callbacks when not bound
 - Added a wcd939x_swr_get_regmap() callback, because dev_get_regmap() would not work anymore without using devm in probe
 - Removed useless pm_runtime_mark_last_busy in resume
- Codec driver
 - Fixed hph_mode setup, returning 0 is already set, checking against all possible values
 - Used CLS_H_NORMAL instead CLS_H_INVALID as it should be in the hph_mode_mux_text list
 - Used wcd939x_swr_get_regmap() to get TX SoundWire device device
 - Fixed a probable uninitialized usage of version variable in probe
- Link to v3: https://lore.kernel.org/r/20231207-topic-sm8650-upstream-wcd939x-codec-v3-0-6df9585ec7c8@linaro.org

Changes in v3:
- Fixed W=1 and smatch warnings reported by lkp & Dan Carpenter
- Fixed dependency on CONFIG_TYPEC and added guards to not build type-c related code when disabled
- Collected review on second bindings patch
- Link to v2: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-wcd939x-codec-v2-0-94ed814b25aa@linaro.org

Changes in v2:
- Bindings:
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Collected review for first patch
  - Added wcd9395 as fallback of wcd9390
  - Fixes typos errors
- MBHC:
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Fixed EXPORT_SYMBOL into EXPORT_SYMBOL_GPL
  - Fixed typo in commit message
- Soundwire Devices driver
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Dropped comments and unused code
  - Reworked wcd939x_swr_get_current_bank()
  - Added comments to wcd9390_interrupt_callback()
  - Reworked regmap's wcd939x_readonly/volatile_register checks
  - Added comments explaining while bind/unbind are empty
  - Added comment on SDW_SLAVE_ENTRY meaning
  - Added more register fields defines
  - Style fixes
- Codec driver
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Added MICB_BIAS_ values enum and used them in the code
  - Moved zdet_param to the top
  - Added TLV data for ear_pa_gain and used it
  - Defined as much as possible every bit field used on/from register
  - Replaced 1/0 to true/false when writing to single bit fields
  - Replaced for loop on all bits with ffs(), simplified code
  - Simplified MICB fields handling code
  - Reworked and simplified wcd939x_get/set_compander and other kcontrol get/setters
  - Reworked and simplified MHGC impedance/zdet/qval code, dropped dead code
  - Added comments on wcd939x_wd_handle_irq() utility
  - Added comment on the interrupt handling architecture
- I've not moved common code yet, I'll probably do later since it would alter wcd939x code
- Link to v1: https://lore.kernel.org/r/20231123-topic-sm8650-upstream-wcd939x-codec-v1-0-21d4ad9276de@linaro.org

---
Neil Armstrong (5):
      ASoC: dt-bindings: qcom,wcd938x: move out common properties
      ASoC: dt-bindings: document WCD939x Audio Codec
      ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux
      ASoC: codecs: Add WCD939x Soundwire devices driver
      ASoC: codecs: Add WCD939x Codec driver

 .../devicetree/bindings/sound/qcom,wcd938x.yaml    |   81 +-
 .../bindings/sound/qcom,wcd939x-sdw.yaml           |   69 +
 .../devicetree/bindings/sound/qcom,wcd939x.yaml    |   96 +
 .../bindings/sound/qcom,wcd93xx-common.yaml        |   95 +
 sound/soc/codecs/Kconfig                           |   19 +
 sound/soc/codecs/Makefile                          |    7 +
 sound/soc/codecs/wcd-clsh-v2.h                     |    1 +
 sound/soc/codecs/wcd-mbhc-v2.c                     |   95 +-
 sound/soc/codecs/wcd-mbhc-v2.h                     |    3 +
 sound/soc/codecs/wcd939x-sdw.c                     | 1551 ++++++++
 sound/soc/codecs/wcd939x.c                         | 3686 ++++++++++++++++++++
 sound/soc/codecs/wcd939x.h                         |  989 ++++++
 12 files changed, 6597 insertions(+), 95 deletions(-)
---
base-commit: 07b677953b9dca02928be323e2db853511305fa9
change-id: 20231123-topic-sm8650-upstream-wcd939x-codec-c46f621b55d4

Best regards,