- Feb 01, 2022
-
-
Sukadev Bhattiprolu authored
[ Upstream commit 151b6a5c ] We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should send out the next protocol message type. i.e when we get back responses to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs. Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we send out the QUERY_IP_OFFLOAD CRQ. We currently increment ->running_cap_crqs as we send out each CRQ and have the ibmvnic_tasklet() send out the next message type, when this running_cap_crqs count drops to 0. This assumes that all the CRQs of the current type were sent out before the count drops to 0. However it is possible that we send out say 6 CRQs, get preempted and receive all the 6 responses before we send out the remaining CRQs. This can result in ->running_cap_crqs count dropping to zero before all messages of the current type were sent and we end up sending the next protocol message too early. Instead initialize the ->running_cap_crqs upfront so the tasklet will only send the next protocol message after all responses are received. Use the cap_reqs local variable to also detect any discrepancy (either now or in future) in the number of capability requests we actually send. Currently only send_query_cap() is affected by this behavior (of sending next message early) since it is called from the worker thread (during reset) and from application thread (during ->ndo_open()) and they can be preempted. send_request_cap() is only called from the tasklet which processes CRQ responses sequentially, is not be affected. But to maintain the existing symmtery with send_query_capability() we update send_request_capability() also. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 27a8caa5 ] During IP fragmentation we sanitize IP options. This means overwriting options which should not be copied with NOPs. Only the first fragment has the original, full options. ip_fraglist_prepare() copies the IP header and options from previous fragment to the next one. Commit 19c3401a ("net: ipv4: place control buffer handling away from fragmentation iterators") moved sanitizing options before ip_fraglist_prepare() which means options are sanitized and then overwritten again with the old values. Fixing this is not enough, however, nor did the sanitization work prior to aforementioned commit. ip_options_fragment() (which does the sanitization) uses ipcb->opt.optlen for the length of the options. ipcb->opt of fragments is not populated (it's 0), only the head skb has the state properly built. So even when called at the right time ip_options_fragment() does nothing. This seems to date back all the way to v2.5.44 when the fast path for pre-fragmented skbs had been introduced. Prior to that ip_options_build() would have been called for every fragment (in fact ever since v2.5.44 the fragmentation handing in ip_options_build() has been dead code, I'll clean it up in -next). In the original patch (see Link) caixf mentions fixing the handling for fragments other than the second one, but I'm not sure how _any_ fragment could have had their options sanitized with the code as it stood. Tested with python (MTU on lo lowered to 1000 to force fragmentation): import socket s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s.setsockopt(socket.IPPROTO_IP, socket.IP_OPTIONS, bytearray([7,4,5,192, 20|0x80,4,1,0])) s.sendto(b'1'*2000, ('127.0.0.1', 1234)) Before: IP (tos 0x0, ttl 64, id 1053, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.36500 > localhost.search-agent: UDP, length 2000 IP (tos 0x0, ttl 64, id 1053, offset 968, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 64, id 1053, offset 1936, flags [none], proto UDP (17), length 100, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost > localhost: udp After: IP (tos 0x0, ttl 96, id 42549, offset 0, flags [+], proto UDP (17), length 996, options (RR [bad length 4] [bad ptr 5] 192.148.4.1,,RA value 256)) localhost.51607 > localhost.search-agent: UDP, bad length 2000 > 960 IP (tos 0x0, ttl 96, id 42549, offset 968, flags [+], proto UDP (17), length 996, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp IP (tos 0x0, ttl 96, id 42549, offset 1936, flags [none], proto UDP (17), length 100, options (NOP,NOP,NOP,NOP,RA value 256)) localhost > localhost: udp RA (20 | 0x80) is now copied as expected, RR (7) is "NOPed out". Link: https://lore.kernel.org/netdev/20220107080559.122713-1-ooppublic@163.com/ Fixes: 19c3401a ("net: ipv4: place control buffer handling away from fragmentation iterators") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
caixf <ooppublic@163.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Yajun Deng authored
[ Upstream commit 1b9fbe81 ] Add a if statements to avoid the warning. Dan Carpenter report: The patch faf482ca: "net: ipv4: Move ip_options_fragment() out of loop" from Aug 23, 2021, leads to the following Smatch complaint: net/ipv4/ip_output.c:833 ip_do_fragment() warn: variable dereferenced before check 'iter.frag' (see line 828) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: faf482ca ("net: ipv4: Move ip_options_fragment() out of loop") Link: https://lore.kernel.org/netdev/20210830073802.GR7722@kadam/T/#t Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
Yajun Deng authored
[ Upstream commit faf482ca ] The ip_options_fragment() only called when iter->offset is equal to zero, so move it out of loop, and inline 'Copy the flags to each fragment.' As also, remove the unused parameter in ip_frag_ipcb(). Signed-off-by:
-
Athira Rajeev authored
[ Upstream commit fb6433b4 ] Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. Fixes: 2c9ac51b ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by:
Sachin Sant <sachinp@linux.ibm.com> Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220122033429.25395-1-atrajeev@linux.vnet.ibm.com Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit a53fff96 ] Experiments with MAX6654 show that its alert function is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 229d495d ("hwmon: (lm90) Add max6654 support to lm90 driver") Cc: Josh Lehan <krellan@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Mihai Carabas authored
[ Upstream commit e9b7c3a4 ] The kernel is aligned at SEGMENT_SIZE and this is the size populated in the PE headers: arch/arm64/kernel/efi-header.S: .long SEGMENT_ALIGN // SectionAlignment EFI_KIMG_ALIGN is defined as: (SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN : THREAD_ALIGN) So it depends on THREAD_ALIGN. On newer builds this message started to appear even though the loader is taking into account the PE header (which is stating SEGMENT_ALIGN). Fixes: c32ac11d ("efi/libstub: arm64: Double check image alignment at entry") Signed-off-by:
Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
David Howells authored
[ Upstream commit 2c13c05c ] Improve retransmission backoff by only backing off when we retransmit data packets rather than when we set the lost ack timer. To this end: (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the retransmission timer and only tell it that we are retransmitting if we actually have things to retransmit. Note that it's possible for the retransmission algorithm to race with the processing of a received ACK, so we may see no packets needing retransmission. (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the ack_lost_at timer, as it may then get bumped twice. With this, when looking at one particular packet, the retransmission intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms, 136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s. Fixes: c410bf01 ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
-
Subbaraya Sundeep authored
[ Upstream commit a8db854b ] PF forwards its VF messages to AF and corresponding replies from AF to VF. AF sets proper error code in the replies after processing message requests. Currently PF checks the error codes in replies and sends invalid message to VF. This way VF lacks the information of error code set by AF for its messages. This patch changes that such that PF simply forwards AF replies so that VF can handle error codes. Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Marek Behún authored
[ Upstream commit cbda1b16 ] Commit bafbdd52 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). Fixes: bafbdd52 ("phylib: Add device reset GPIO support") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220119162748.32418-1-kabel@kernel.org Signed-off-by:
-
Robert Hancock authored
[ Upstream commit d15c7e87 ] A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which is a 1 Gbps copper module operating in SGMII mode with an internal BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the module would work properly on the initial insertion or boot of the device, but after the device was rebooted, the link would either only come up at 100 Mbps speeds or go up and down erratically. I found no meaningful changes in the PHY configuration registers between the working and non-working boots, but the status registers seemed to have a lot of error indications set on the SERDES side of the device on the non-working boot. I suspect the problem is that whatever happens on the SGMII link when the device is rebooted and the FPGA logic gets reloaded ends up putting the module's onboard PHY into a bad state. Since commit 6e2d85ec ("net: phy: Stop with excessive soft reset") the genphy_soft_reset call is not made automatically by the PHY core unless the callback is explicitly specified in the driver structure. For most of these Broadcom devices, there is probably a hardware reset that gets asserted to reset the PHY during boot, however for SFP modules (where the BCM54616S is commonly found) no such reset line exists, so if the board keeps the SFP cage powered up across a reboot, it will end up with no reset occurring during reboots. Hook up the genphy_soft_reset callback for BCM54616S to ensure that a PHY reset is performed before the device is initialized. This appears to fix the issue with erratic operation after a reboot with this SFP module. Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vincent Guittot authored
[ Upstream commit 98b0d890 ] Rick reported performance regressions in bugzilla because of cpu frequency being lower than before: https://bugzilla.kernel.org/show_bug.cgi?id=215045 He bisected the problem to: commit 1c35b07e ("sched/fair: Ensure _sum and _avg values stay consistent") This commit forces util_sum to be synced with the new util_avg after removing the contribution of a task and before the next periodic sync. By doing so util_sum is rounded to its lower bound and might lost up to LOAD_AVG_MAX-1 of accumulated contribution which has not yet been reflected in util_avg. Instead of always setting util_sum to the low bound of util_avg, which can significantly lower the utilization of root cfs_rq after propagating the change down into the hierarchy, we revert the change of util_sum and propagate the difference. In addition, we also check that cfs's util_sum always stays above the lower bound for a given util_avg as it has been observed that sched_entity's util_sum is sometimes above cfs one. Fixes: 1c35b07e ("sched/fair: Ensure _sum and _avg values stay consistent") Reported-by:
Rick Yiu <rickyiu@google.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
-
Peter Zijlstra authored
[ Upstream commit 09f5e7dc ] Time readers that cannot take locks (due to NMI etc..) currently make use of perf_event::shadow_ctx_time, which, for that event gives: time' = now + (time - timestamp) or, alternatively arranged: time' = time + (now - timestamp) IOW, the progression of time since the last time the shadow_ctx_time was updated. There's problems with this: A) the shadow_ctx_time is per-event, even though the ctx_time it reflects is obviously per context. The direct concequence of this is that the context needs to iterate all events all the time to keep the shadow_ctx_time in sync. B) even with the prior point, the context itself might not be active meaning its time should not advance to begin with. C) shadow_ctx_time isn't consistently updated when ctx_time is There are 3 users of this stuff, that suffer differently from this: - calc_timer_values() - perf_output_read() - perf_event_update_userpage() /* A */ - perf_event_read_local() /* A,B */ In particular, perf_output_read() doesn't suffer at all, because it's sample driven and hence only relevant when the event is actually running. This same was supposed to be true for perf_event_update_userpage(), after all self-monitoring implies the context is active *HOWEVER*, as per commit f7925653 ("perf/core: fix userpage->time_enabled of inactive events") this goes wrong when combined with counter overcommit, in that case those events that do not get scheduled when the context becomes active (task events typically) miss out on the EVENT_TIME update and ENABLED time is inflated (for a little while) with the time the context was inactive. Once the event gets rotated in, this gets corrected, leading to a non-monotonic timeflow. perf_event_read_local() made things even worse, it can request time at any point, suffering all the problems perf_event_update_userpage() does and more. Because while perf_event_update_userpage() is limited by the context being active, perf_event_read_local() users have no such constraint. Therefore, completely overhaul things and do away with perf_event::shadow_ctx_time. Instead have regular context time updates keep track of this offset directly and provide perf_event_time_now() to complement perf_event_time(). perf_event_time_now() will, in adition to being context wide, also take into account if the context is active. For inactive context, it will not advance time. This latter property means the cgroup perf_cgroup_info context needs to grow addition state to track this. Additionally, since all this is strictly per-cpu, we can use barrier() to order context activity vs context time. Fixes: 7d9285e8 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"") Signed-off-by:
Song Liu <song@kernel.org> Tested-by:
Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c034f48e ] Drop repeated words in kernel/events/. {if, the, that, with, time} Drop repeated words in kernel/locking/. {it, no, the} Drop repeated words in kernel/sched/. {in, not} Link: https://lkml.kernel.org/r/20210127023412.26292-1-rdunlap@infradead.org Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Will Deacon <will@kernel.org> [kernel/locking/] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 830af2eb ] The packet isn't invalid, REPEAT means we're trying again after cleaning out a stale connection, e.g. via tcp tracker. This caused increases of invalid stat counter in a test case involving frequent connection reuse, even though no packet is actually invalid. Fixes: 56a62e22 ("netfilter: conntrack: fix NF_REPEAT handling") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Naveen N. Rao authored
[ Upstream commit 3f5f766d ] Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
-
Trond Myklebust authored
[ Upstream commit 6ff9d99b ] Renaming a file is required by POSIX to update the file ctime, so ensure that the file data is synced to disk so that we don't clobber the updated ctime by writing back after creating the hard link. Fixes: f2c2c552 ("NFS: Move delegation recall into the NFSv4 callback for rename_setup()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 20497503 ] Creating a hard link is required by POSIX to update the file ctime, so ensure that the file data is synced to disk so that we don't clobber the updated ctime by writing back after creating the hard link. Fixes: 9f768272 ("NFS: Move the delegation return down into nfs4_proc_link()") Signed-off-by:
-
Eric Dumazet authored
commit aafc2e32 upstream. struct fib6_node's fn_sernum field can be read while other threads change it. Add READ_ONCE()/WRITE_ONCE() annotations. Do not change existing smp barriers in fib6_get_cookie_safe() and __fib6_update_sernum_upto_root() syzbot reported: BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1: fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178 fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112 fib6_walk net/ipv6/ip6_fib.c:2160 [inline] fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline] __fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256 fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281 rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline] addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230 addrconf_dad_work+0x908/0x1170 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:359 ret_from_fork+0x1f/0x30 read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0: fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline] rt6_get_cookie include/net/ip6_fib.h:306 [inline] ip6_dst_store include/net/ip6_route.h:234 [inline] inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109 inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402 tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline] tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680 __tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864 tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725 mptcp_push_release net/mptcp/protocol.c:1491 [inline] __mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578 mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] kernel_sendmsg+0x97/0xd0 net/socket.c:745 sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086 inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834 kernel_sendpage+0x187/0x200 net/socket.c:3492 sock_sendpage+0x5a/0x70 net/socket.c:1007 pipe_to_sendpage+0x128/0x160 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x207/0x500 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0x94/0xd0 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:936 splice_direct_to_actor+0x345/0x650 fs/splice.c:891 do_splice_direct+0x106/0x190 fs/splice.c:979 do_sendfile+0x675/0xc40 fs/read_write.c:1245 __do_sys_sendfile64 fs/read_write.c:1310 [inline] __se_sys_sendfile64 fs/read_write.c:1296 [inline] __x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000026f -> 0x00000271 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 The Fixes tag I chose is probably arbitrary, I do not think we need to backport this patch to older kernels. Fixes: c5cff856 ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220120174112.1126644-1-eric.dumazet@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Expósito authored
commit 5e761a22 upstream. The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c829028 ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com Signed-off-by:
-
Miaoqian Lin authored
commit c04c3148 upstream. If of_find_device_by_node() succeeds, dsi_get_phy() doesn't a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: ec31abf6 ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
-
Xianting Tian authored
commit 0a727b45 upstream. For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by:
Xianting Tian <xianting.tian@linux.alibaba.com> Fixes: 072f1f91 ("drm/msm: add support for "stolen" mem") Reviewed-by:
-
Jianguo Wu authored
commit 1d10f8a1 upstream. After commit:7866a621 ("dev: add per net_device packet type chains"), we can not get packet types that are bound to a specified net device by /proc/net/ptype, this patch fix the regression. Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch: Before: [root@localhost ~]# cat /proc/net/ptype Type Device Function 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv After: [root@localhost ~]# cat /proc/net/ptype Type Device Function ALL ens192 tpacket_rcv 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv v1 -> v2: - fix the regression rather than adding new /proc API as suggested by Stephen Hemminger. Fixes: 7866a621 ("dev: add per net_device packet type chains") Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
-
Trond Myklebust authored
commit 1751fc1d upstream. If the file type changes back to being a regular file on the server between the failed OPEN and our LOOKUP, then we need to re-run the OPEN. Fixes: 0dd2b474 ("nfs: implement i_op->atomic_open()") Signed-off-by:
-
Trond Myklebust authored
commit ac795161 upstream. If the application sets the O_DIRECTORY flag, and tries to open a regular file, nfs_atomic_open() will punt to doing a regular lookup. If the server then returns a regular file, we will happily return a file descriptor with uninitialised open state. The fix is to return the expected ENOTDIR error in these cases. Reported-by:
Lyu Tao <tao.lyu@epfl.ch> Fixes: 0dd2b474 ("nfs: implement i_op->atomic_open()") Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit a66c5ed5 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64 ("hwmon: (lm90) Add support for GMT G781") Signed-off-by:
-
Eric Dumazet authored
commit 23f57406 upstream. ip_select_ident_segs() has been very conservative about using the connected socket private generator only for packets with IP_DF set, claiming it was needed for some VJ compression implementations. As mentioned in this referenced document, this can be abused. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) Before switching to pure random IPID generation and possibly hurt some workloads, lets use the private inet socket generator. Not only this will remove one vulnerability, this will also improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT Fixes: 73f156a6 ("inetpeer: get rid of ip_id_count") Signed-off-by:
David Ahern <dsahern@kernel.org> Reported-by:
Ray Che <xijiache@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Xin Long authored
commit 2afc3b5a upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Guenter Roeck authored
commit 94746b0b upstream. Experiments with MAX6680 and MAX6681 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8 ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by:
-
Guenter Roeck authored
commit f614629f upstream. Experiments with MAX6646 and MAX6648 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8 ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by:
-
Congyu Liu authored
commit 47934e06 upstream. In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27db ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by:
Congyu Liu <liu3101@purdue.edu> Signed-off-by:
-
Ido Schimmel authored
commit 6cee105e upstream. The warning messages can be invoked from the data path for every packet transmitted through an ip6gre netdev, leading to high CPU utilization. Fix that by rate limiting the messages. Fixes: 09c6bbf0 ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
John Meneghini authored
commit 847f9ea4 upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1 ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by:
Guangwu Zhang <guazhang@redhat.com> Co-developed-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
John Meneghini <jmeneghi@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Matthias Kaehlcke authored
commit 7a534ae8 upstream. struct rpmsg_eptdev contains a struct cdev. The current code frees the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_eptdev could be freed before the cdev is entirely released. The cdev_device_add/del() API was created to address this issue (see commit '233ed09d ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f ("rpmsg: Driver for user space endpoint interface") Suggested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Sujit Kautkar authored
commit b7fb2dad upstream. struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f ("rpmsg: Driver for user space endpoint interface") Signed-off-by:
Sujit Kautkar <sujitka@chromium.org> Signed-off-by:
-
Linyu Yuan authored
commit 945c37ed upstream. when CONFIG_USB_ROLE_SWITCH is not defined, add usb_role_switch_find_by_fwnode() definition which return NULL. Fixes: c6919d5e ("usb: roles: Add usb_role_switch_find_by_fwnode()") Signed-off-by:
Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.com Signed-off-by:
-
Joe Damato authored
commit 3b8428b8 upstream. Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Joe Damato <jdamato@fastly.com> Reported-by:
kernel test robot <lkp@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Karen Sornek authored
commit 0f344c81 upstream. Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac ("i40e: implement virtual device interface") Signed-off-by:
Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by:
Karen Sornek <karen.sornek@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Sylwester Dziedziuch authored
commit 92947844 upstream. When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. Fixes: 41c445ff ("i40e: main driver core") Fixes: 74608d17 ("i40e: add support for XDP_TX action") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
-
Jedrzej Jagielski authored
commit d701658a upstream. Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3 ("i40e: driver core headers") Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by:
Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by:
Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by:
-
