QDSS mhi_qdss mode node permission sometimes cannot be updated
by ueventd, this is because mode node is not created after ueventd
received qdss KOBJ_ADD event. This change solves this issue.

Change-Id: Ibdb1051db7f442fb27f6501ec81742127e0bf930
Signed-off-by: Yuanfang Zhang <zhangyuanfang@codeaurora.org>

When we have no buffer available in HW and switch to irq, a dead-loop is
observed between sending force close comamnd and replenish workqueue.
The fix is to keep in polling mode, wait for napi-poll and replenish again.

Change-Id: Ied0504564f86f41b8b5f9aa25170768027bf3391
Signed-off-by: Ashok Vuyyuru <avuyyuru@codeaurora.org>
Signed-off-by: Bojun Pan <bojunp@codeaurora.org>

packet_rcv_spkt is expecting to strip out the skb_mac_header.
Part of the alloc_skb, the mac header is setup ~0 which is causing
the skb data point to wrong location.

Change-Id: Ib8c14c029145da6a779ead21fb851b26677f4d0f
Signed-off-by: Bojun Pan <bojunp@codeaurora.org>

In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY
and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong.
Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well.

Cc: stable@vger.kernel.org
Fixes: 43e64bf3 ("cfg80211: handle 6 GHz capability of new station")
Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeid


Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change-Id: Ic58ceb7a77933931c74b40ce9c272cc03d9cdacf
CRs-Fixed: 2763406
Git-commit: fce2ff72
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git


Signed-off-by: Vinita S. Maloo <vmaloo@codeaurora.org>
Signed-off-by: Madhvapathi Sriram <msriram@codeaurora.org>

hold file reference till the sock event is sent.

Change-Id: I14d581f210c86e5771bec22a9aca7c78630e9ac1
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>

Primary and secondary bootloader debug data is required to debug
FW initialization issues. Add support to dump debug data for
PBL and SBL for HST.

Change-Id: If5c3a5c76a4b073bc6122f8a866592515fe277ad
Signed-off-by: Mohammed Siddiq <msiddiq@codeaurora.org>

Update QMI header files used for communication between host platform
driver and FW for PCIE gen switch requirement and for getting BDF
config data that host is interested.

Change-Id: Ia730bc3804d3d4e1ee0af69d00fa2aeccbeb7298
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>

Add 144fps to the list of refresh rates supported
by display driver.

Change-Id: Ie7fb67bedc35c7bc5e89dd8f53a7e80de81046e0
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

ADPLv3 targets do not require status to be enabled on ODL_DPL pipe.
Make changes to disable the status for targets with IPAv4.5 and above.

Change-Id: Ica07a25a01e742928d3ecb19a88b7ee2305235ae
Signed-off-by: Chaitanya Pratapa <cpratapa@codeaurora.org>
Signed-off-by: Ashok Vuyyuru <avuyyuru@codeaurora.org>

Sometimes due to late initialization glink callback may not be
initialized and incoming will be dropped.

Print error message if receive callback is not ready.

Change-Id: I3eae1717d4e1c14b319e288078d122762fd476e7
Signed-off-by: Sarannya S <sarannya@codeaurora.org>

In low latency ping scenario clock unvoting fastly due to this
ping RTT was increased. To avoid these scenario increased the
inactivity timer to 100msec.

Change-Id: I9b11e2adbe087aa67fa2e7ed751b190abb09d0ed
Signed-off-by: Ashok Vuyyuru <avuyyuru@codeaurora.org>

Do not release CVP persist buffers until all outstanding DSP frames
are handled by firmware.

Change-Id: I80ed488962109d09c368097534c6d1c9d1bee9b6
Signed-off-by: Haseeb Khan <hkhan@codeaurora.org>

Even though IPA FW is not loaded device continue perform
other operations. Due to which device moves to unstable
state. Added changes to assert the device when IPA FW not
loaded.

Change-Id: Ibc164ebfef382c0e06b0f9b81f91dcd5928a5f3c
Signed-off-by: Praveen Kurapati <pkurapat@codeaurora.org>

This change is for general scheduler improvement.

Change-Id: I19ec68fe40d931b501ea84a9306d04fcb58db60d
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>

Adjust the 6 GHz frequency to channel conversion function,
the other way around was previously handled.

Change-Id: I3a10fbef7ece7b86f44ac9bd09556f9d89d1844c
CRs-Fixed: 3183686
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org
Git-commit: 2d9b5550
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git


Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Madhvapathi Sriram <msriram@codeaurora.org>

This change is for general scheduler improvements.

Change-Id: I917955ef029f30db6c185a41f717a89dd179cc49
Signed-off-by: Biao Long <blong@codeaurora.org>

Wlan fw will provide RD card chain mask capability
for as part of cap qmi message exchange between host
platform and fw platform. Using this info host platform
will determine whether RD card chain is 1x1 or 2x2. It will
enabled chain1 regulator if RD card is 2x2 and also
if wlan fw doesn't provide any details about RD card
chain mask capability chain1 regulator will enabled
by default.

Change-Id: I83d9058fe505f2519a2300a4989e08acbdbcaafb
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>

For 8nm zero value is treated as a valid efuse value and
driver should honor this efuse value to update the tune
params. This change makes the updation of tune value possible
even if the efuse value is zero.

Change-Id: I6eac2e2414bf61b89aa41bebbfe56ad10017969e
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>