- Aug 07, 2018
-
-
Florian Westphal authored
commit b7181216 upstream. We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by:
<syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Todd Kjos authored
proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by:
-
- Jul 06, 2018
-
-
Li Jinyue authored
commit fbe0e839 upstream. UBSAN reports signed integer overflow in kernel/futex.c: UBSAN: Undefined behaviour in kernel/futex.c:2041:18 signed integer overflow: 0 - -2147483648 cannot be represented in type 'int' Add a sanity check to catch negative values of nr_wake and nr_requeue. Signed-off-by:
Li Jinyue <lijinyue@huawei.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: dvhart@infradead.org Link: https://lkml.kernel.org/r/1513242294-31786-1-git-send-email-lijinyue@huawei.com Signed-off-by:
-
Florian Westphal authored
commit 57ebd808 upstream. The rationale for removing the check is only correct for rulesets generated by ip(6)tables. In iptables, a jump can only occur to a user-defined chain, i.e. because we size the stack based on number of user-defined chains we cannot exceed stack size. However, the underlying binary format has no such restriction, and the validation step only ensures that the jump target is a valid rule start point. IOW, its possible to build a rule blob that has no user-defined chains but does contain a jump. If this happens, no jump stack gets allocated and crash occurs because no jumpstack was allocated. Fixes: 7814b6ec ("netfilter: xtables: don't save/restore jumpstack offset") Reported-by:
<syzbot+e783f671527912cd9403@syzkaller.appspotmail.com> Signed-off-by:
-
Seunghun Han authored
commit b3b7c479 upstream. The check_interval file in /sys/devices/system/machinecheck/machinecheck<cpu number> directory is a global timer value for MCE polling. If it is changed by one CPU, mce_restart() broadcasts the event to other CPUs to delete and restart the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the mce_timer variable. If more than one CPU writes a specific value to the check_interval file concurrently, mce_timer is not protected from such concurrent accesses and all kinds of explosions happen. Since only root can write to those sysfs variables, the issue is not a big deal security-wise. However, concurrent writes to these configuration variables is void of reason so the proper thing to do is to serialize the access with a mutex. Boris: - Make store_int_with_restart() use device_store_ulong() to filter out negative intervals - Limit min interval to 1 second - Correct locking - Massage commit message Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Geert Uytterhoeven authored
commit 6a7228d9 upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 62655397 ("driver core: platform: fix race condition with driver_override") and 9561475d ("PCI: Fix race condition with driver_override"). Change-Id: I55fd7b7d3834293d6f9dac0fde7c0108c87f6171 Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Johannes Thumshirn authored
commit 48ae8484 upstream. If the list search in sg_get_rq_mark() fails to find a valid request, we return a bogus element. This then can later lead to a GPF in sg_remove_scat(). So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case the list search doesn't find a valid request. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Doug Gilbert <dgilbert@interlog.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Doug Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Krzysztof Opasiak authored
commit aa65d11a upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Cc: stable@vger.kernel.org Tested-by:
David Lechner <david@lechnology.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jerry Zhang <zhangjerry@google.com> Signed-off-by:
-
Felipe F. Tonello authored
commit 079fe5a6 upstream. This function is shared between gadget functions, so this avoid unnecessary duplicated code and potentially avoid memory leaks. Reviewed-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Mel Gorman authored
commit 65d8fc77 upstream. When dealing with key handling for shared futexes, we can drastically reduce the usage/need of the page lock. 1) For anonymous pages, the associated futex object is the mm_struct which does not require the page lock. 2) For inode based, keys, we can check under RCU read lock if the page mapping is still valid and take reference to the inode. This just leaves one rare race that requires the page lock in the slow path when examining the swapcache. Additionally realtime users currently have a problem with the page lock being contended for unbounded periods of time during futex operations. Task A get_futex_key() lock_page() ---> preempted Now any other task trying to lock that page will have to wait until task A gets scheduled back in, which is an unbound time. With this patch, we pretty much have a lockless futex_get_key(). Experiments show that this patch can boost/speedup the hashing of shared futexes with the perf futex benchmarks (which is good for measuring such change) by up to 45% when there are high (> 100) thread counts on a 60 core Westmere. Lower counts are pretty much in the noise range or less than 10%, but mid range can be seen at over 30% overall throughput (hash ops/sec). This makes anon-mem shared futexes much closer to its private counterpart. Signed-off-by:
Mel Gorman <mgorman@suse.de> [ Ported on top of thp refcount rework, changelog, comments, fixes. ] Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
-
- May 31, 2018
-
-
Hou Tao authored
commit 9b54d816 upstream. If blkg_create fails, new_blkg passed as an argument will be freed by blkg_create, so there is no need to free it again. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 862c03ee ] ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c ("ipv6: introduce ipv6_make_skb") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by:
Mike Maloney <maloney@google.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 95ef498d ] In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Mike Maloney authored
[ Upstream commit 749439bf ] The logic in __ip6_append_data() assumes that the MTU is at least large enough for the headers. A device's MTU may be adjusted after being added while sendmsg() is processing data, resulting in __ip6_append_data() seeing any MTU. For an mtu smaller than the size of the fragmentation header, the math results in a negative 'maxfraglen', which causes problems when refragmenting any previous skb in the skb_write_queue, leaving it possibly malformed. Instead sendmsg returns EINVAL when the mtu is calculated to be less than IPV6_MIN_MTU. Found by syzkaller: kernel BUG at ./include/linux/skbuff.h:2064! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d0b68580 task.stack: ffff8801ac6b8000 RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline] RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216 RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000 RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0 RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000 R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8 R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000 FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:911 [inline] udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093 udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x352/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9 RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005 RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69 R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000 Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570 RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570 Reported-by:
-
Geert Uytterhoeven authored
commit d2ffed51 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874a ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01 ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
-
Eric Biggers authored
commit 2eb9eabf upstream. syzkaller with KASAN reported an out-of-bounds read in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y: keyctl add asymmetric desc $'\x30\x30' @s The bug is that the length of an ASN.1 data value isn't validated in the case where it is encoded using the short form, causing the decoder to read past the end of the input buffer. Fix it by validating the length. The bug report was: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818 CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447d983 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xb3/0x10b lib/dump_stack.c:52 print_address_description+0x79/0x2a0 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x236/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x347/0xb20 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x447c89 RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89 RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5 RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric Biggers authored
commit e0058f3a upstream. In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed to the action functions before their lengths had been computed, using the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH). This resulted in reading data past the end of the input buffer, when given a specially crafted message. Fix it by rearranging the code so that the indefinite length is resolved before the action is called. This bug was originally found by fuzzing the X.509 parser in userspace using libFuzzer from the LLVM project. KASAN report (cleaned up slightly): BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline] BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 Read of size 128 at addr ffff880035dd9eaf by task keyctl/195 CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0xd1/0x175 lib/dump_stack.c:53 print_address_description+0x78/0x260 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x23f/0x350 mm/kasan/report.c:409 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy ./include/linux/string.h:341 [inline] x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447 x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Allocated by task 195: __do_kmalloc_node mm/slab.c:3675 [inline] __kmalloc_node+0x47/0x60 mm/slab.c:3682 kvmalloc ./include/linux/mm.h:540 [inline] SYSC_add_key security/keys/keyctl.c:104 [inline] SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
- May 08, 2018
-
-
Guenter Roeck authored
hrtimer_init_on_stack() needs a matching call to destroy_hrtimer_on_stack(), so both need to be exported. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Alistair Strachan <astrachan@google.com>
-
- May 07, 2018
-
-
Linus Torvalds authored
commit ae665016 upstream. 范龙飞 reports that KASAN can report a use-after-free in __lock_acquire. The reason is due to insufficient serialization in lo_release(), which will continue to use the loop device even after it has decremented the lo_refcnt to zero. In the meantime, another process can come in, open the loop device again as it is being shut down. Confusion ensues. Reported-by:
范龙飞 <long7573@126.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Dmitry Torokhov authored
commit a5082947 upstream. parse_hid_report_descriptor() has a while (i < length) loop, which only guarantees that there's at least 1 byte in the buffer, but the loop body can read multiple bytes which causes out-of-bounds access. Reported-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alistair Strachan authored
Signed-off-by:
-
Alistair Strachan authored
Fix "warning: cast to pointer from integer of different size" when printing the region shm physical address. Use the %pa conversion specifier and pass the resource by reference. Signed-off-by:
-
Alistair Strachan authored
Map the region shm as write-combining instead of uncachable. Signed-off-by:
-
Alistair Strachan authored
The build server config can be used with gcc or clang. Specify CC=clang to build with clang. Change-Id: Id346ab1489ecaaef8e9e66b084cc416dd0581f69 Signed-off-by: -
Alistair Strachan authored
This file is based on x86_64_defconfig, merged with the base and recommended configs from configs.git, with the virtio drivers enabled and some spurious kernel features turned off. (This version differs from the 4.9 and 4.14 versions because it uses the deprecated ANDROID_LOW_MEMORY_KILLER feature instead of MEMCG.) Change-Id: I61bde941e8cfef2dd83cb4ff040f7380922cc44e Signed-off-by: -
Greg Hartman authored
The cuttlefish system is a virtual SoC architecture based on QEMU. It uses the QEMU ivshmem feature to share memory regions between guest and host with a custom protocol. Signed-off-by:
Greg Hartman <ghartman@google.com> [sent upstream via staging https://patchwork.kernel.org/patch/10339507/ ] Change-Id: Iaf5d7536898329a66d00764d8892d1395164519e Signed-off-by:
-
- Apr 03, 2018
-
-
Xin Long authored
commit df80cd9b upstream. Now when peeling off an association to the sock in another netns, all transports in this assoc are not to be rehashed and keep use the old key in hashtable. As a transport uses sk->net as the hash key to insert into hashtable, it would miss removing these transports from hashtable due to the new netns when closing the sock and all transports are being freeed, then later an use-after-free issue could be caused when looking up an asoc and dereferencing those transports. This is a very old issue since very beginning, ChunYu found it with syzkaller fuzz testing with this series: socket$inet6_sctp() bind$inet6() sendto$inet6() unshare(0x40000000) getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST() getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF() This patch is to block this call when peeling one assoc off from one netns to another one, so that the netns of all transport would not go out-sync with the key in hashtable. Note that this patch didn't fix it by rehashing transports, as it's difficult to handle the situation when the tuple is already in use in the new netns. Besides, no one would like to peel off one assoc to another netns, considering ipaddrs, ifaces, etc. are usually different. Reported-by:
ChunYu Wang <chunwang@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Mohamed Ghannam authored
[ Upstream commit 8f659a03 ] inet->hdrincl is racy, and could lead to uninitialized stack pointer usage, so its value should be read only once. Change-Id: I0b2a9b1822d9bc036b2102fceab986318c45e194 Fixes: c008ba5b ("ipv4: Avoid reading user iov twice after raw_probe_proto_opt") Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
-
Eric Biggers authored
commit 794b4bc2 upstream. With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 2e1c4239 upstream. Andrey Konovalov reported a possible out-of-bounds problem for the cdc_parse_cdc_header function. He writes: It looks like cdc_parse_cdc_header() doesn't validate buflen before accessing buffer[1], buffer[2] and so on. The only check present is while (buflen > 0). So fix this issue up by properly validating the buffer length matches what the descriptor says it is. Reported-by:
-
- Feb 28, 2018
-
-
Willem de Bruijn authored
[ Upstream commit 4971613c ] Once a socket has po->fanout set, it remains a member of the group until it is destroyed. The prot_hook must be constant and identical across sockets in the group. If fanout_add races with packet_do_bind between the test of po->fanout and taking the lock, the bind call may make type or dev inconsistent with that of the fanout group. Hold po->bind_lock when testing po->fanout to avoid this race. I had to introduce artificial delay (local_bh_enable) to actually observe the race. Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Willem de Bruijn authored
[ Upstream commit 008ba2a1 ] Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Change-Id: I8d1e0147022860b1a54cb85bb980d6e4b710cf39 Fixes: dc99f600 ("packet: Add fanout support.") Reported-by:
nixioaming <nixiaoming@huawei.com> Signed-off-by:
-
Takashi Iwai authored
commit 124751d5 upstream. USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit bfc81a8b upstream. When a USB-audio device receives a maliciously adjusted or corrupted buffer descriptor, the USB-audio driver may access an out-of-bounce value at its parser. This was detected by syzkaller, something like: BUG: KASAN: slab-out-of-bounds in usb_audio_probe+0x27b2/0x2ab0 Read of size 1 at addr ffff88006b83a9e8 by task kworker/0:1/24 CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 snd_usb_create_streams sound/usb/card.c:248 usb_audio_probe+0x27b2/0x2ab0 sound/usb/card.c:605 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 This patch adds the checks of out-of-bounce accesses at appropriate places and bails out when it goes out of the given buffer. Reported-by:
-
Greg Kroah-Hartman authored
commit bd7a3fe7 upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by:
-
Jaejoong Kim authored
commit f043bfc9 upstream. The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Reported-by:
Jaejoong Kim <climbbb.kim@gmail.com> Tested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
commit 1c0edc36 upstream. Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by:
-
Johan Hovold authored
commit 299d7572 upstream. Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected. Fixes: 73e487fd ("[PATCH] USB console: fix disconnection issues") Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 786de92b upstream. The uas driver has a subtle bug in the way it handles alternate settings. The uas_find_uas_alt_setting() routine returns an altsetting value (the bAlternateSetting number in the descriptor), but uas_use_uas_driver() then treats that value as an index to the intf->altsetting array, which it isn't. Normally this doesn't cause any problems because the various alternate settings have bAlternateSetting values 0, 1, 2, ..., so the value is equal to the index in the array. But this is not guaranteed, and Andrey Konovalov used the syzkaller fuzzer with KASAN to get a slab-out-of-bounds error by violating this assumption. This patch fixes the bug by making uas_find_uas_alt_setting() return a pointer to the altsetting entry rather than either the value or the index. Pointers are less subject to misinterpretation. Signed-off-by:
-
- Feb 20, 2018
-
-
Joel Fernandes authored
Certain usecases like camera are constantly allocating and freeing binder buffers beyond the first 4k resulting in mmap_sem contention. If we expand the allocated range from 4k to something higher, we can reduce the contention. Tests show that 6 pages is enough to cause very little update_page_range operations and reduces contention. Bug: 36727951 Change-Id: I28bc3fb9b33c764c257e28487712fce2a3c1078b Reported-by:
Tim Murray <timmurray@google.com> Signed-off-by:
Joel Fernandes <joelaf@google.com> Pre-allocate 1 instead of 6 pages as in the original patch, as we use this pre-allocated page to prevent the first page from getting unpinned after removing the buffer headers, rather than pinning pages to speedup larger transactions. Change-Id: Id027adcfd61b2d6b37f69a3f6009a068e90e84f0 Signed-off-by:
Sherry Yang <sherryy@android.com>
-
