- Feb 05, 2020
-
-
Greg Kroah-Hartman authored
-
Jin Yao authored
[ Upstream commit c3314a74 ] Commit 800d3f56 ("perf report: Add warning when libunwind not compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for call chain unwinding and had no support for libunwind. So the warning "Please install libunwind development packages during the perf build." caused the confusion even if the call-graph is displayed correctly. This patch adds checking for HAVE_DWARF_SUPPORT, which is set when libdw-dwarf-unwind is compiled in. Fixes: 800d3f56 ("perf report: Add warning when libunwind not compiled in") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Reviewed-by:
Thomas Richter <tmricht@linux.ibm.com> Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Josef Bacik authored
commit d55966c4 upstream. There was some logic added a while ago to clear out f_bavail in statfs() if we did not have enough free metadata space to satisfy our global reserve. This was incorrect at the time, however didn't really pose a problem for normal file systems because we would often allocate chunks if we got this low on free metadata space, and thus wouldn't really hit this case unless we were actually full. Fast forward to today and now we are much better about not allocating metadata chunks all of the time. Couple this with d792b0f1 ("btrfs: always reserve our entire size for the global reserve") which now means we'll easily have a larger global reserve than our free space, we are now more likely to trip over this while still having plenty of space. Fix this by skipping this logic if the global rsv's space_info is not full. space_info->full is 0 unless we've attempted to allocate a chunk for that space_info and that has failed. If this happens then the space for the global reserve is definitely sacred and we need to report b_avail == 0, but before then we can just use our calculated b_avail. Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Fixes: ca8a51b3 ("btrfs: statfs: report zero available if metadata are exhausted") CC: stable@vger.kernel.org # 4.5+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Tested-By:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Praveen Chaudhary authored
[ Upstream commit 189c9b1e ] skb->csum is updated incorrectly, when manipulation for NF_NAT_MANIP_SRC\DST is done on IPV6 packet. Fix: There is no need to update skb->csum in inet_proto_csum_replace16(), because update in two fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to update skb->csum, because update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as L4 Header checksum for skb->csum calculation. [ pablo@netfilter.org: a few comestic documentation edits ] Signed-off-by:
Praveen Chaudhary <pchaudhary@linkedin.com> Signed-off-by:
Zhenggen Xu <zxu@linkedin.com> Signed-off-by:
Andy Stracner <astracner@linkedin.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 66018a10 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 70a87287 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by:
-
Finn Thain authored
[ Upstream commit 3f4b7e6a ] Make sure the SONIC's DMA engine is idle before altering the transmit and receive descriptors. Add a helper for this as it will be needed again. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 9e311820 ] The SONIC can sometimes advance its rx buffer pointer (RRP register) without advancing its rx descriptor pointer (CRDA register). As a result the index of the current rx descriptor may not equal that of the current rx buffer. The driver mistakenly assumes that they are always equal. This assumption leads to incorrect packet lengths and possible packet duplication. Avoid this by calling a new function to locate the buffer corresponding to a given descriptor. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
[ Upstream commit e3885f57 ] The driver accesses descriptor memory which is simultaneously accessed by the chip, so the compiler must not be allowed to re-order CPU accesses. sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should have done so too but was overlooked. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
[ Upstream commit 865ad2f2 ] The netif_stop_queue() call in sonic_send_packet() races with the netif_wake_queue() call in sonic_interrupt(). This causes issues like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out". Fix this by disabling interrupts when accessing tx_skb[] and next_tx. Update a comment to clarify the synchronization properties. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Madalin Bucur authored
[ Upstream commit 457bfc0a ] As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity. Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 1d3ca681 ] When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 73d527ae ] Add fsl,erratum-a011043 to internal MDIO buses. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 22e98449 ] Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by:
Shahed Shaikh <shshaikh@marvell.com> Tested-by:
Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Hayes Wang authored
[ Upstream commit 9583a363 ] Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 78f7a756 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode". There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM. However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV. Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit d6bce213 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes. That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer. Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer: // read the rid length field bap_read(ai, pBuf, 2, BAP1); // length for remaining part of rid len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2; ... // read remainder of the rid rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1); PC4500_readrid() then returns to readrids() which does: len = comp->len; if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { Where comp->len is the user controlled length field. So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace. Fix it by kzalloc()'ing the buffer. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
-
Vincenzo Frascino authored
[ Upstream commit 9e0caab8 ] The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> [jw: update commit title] Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
-
Vladimir Murzin authored
[ Upstream commit 6849b5eb ] Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to have values other than 0 or 1 while still preserving backward compatibility. At the moment, Linux is quite strict in the way it handles this field at early boot and will not configure arch timer if it doesn't find the value 1. Since here use ubfx for arch timer version extraction (hyb-stub build with -march=armv7-a, so it is safe) To help backports (even though the code was correct at the time of writing) Fixes: 8ec58be9 ("ARM: virt: arch_timers: enable access to physical timers") Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 0e220962 ] When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 95224166 ] With an ebpf program that redirects packets through a vti[6] interface, the packets are dropped because no dst is attached. This could also be reproduced with an AF_PACKET socket, with the following python script (vti1 is an ip_vti interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('vti1', 0x800, 0, 0)) Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Matwey V. Kornilov authored
[ Upstream commit 5abd45ea ] BeagleBone Black series is equipped with 512MB RAM whereas only 256MB is included from am335x-bone-common.dtsi This leads to an issue with unusual setups when devicetree is loaded by GRUB2 directly. Signed-off-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 6fc7caa8 ] Fix bnxt_fltr_match() to match ipv6 source and destination addresses. The function currently only checks ipv4 addresses and will not work corrently on ipv6 filters. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 8f1880cb ] With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e1611965 ] After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning: In function 'iw_handler_get_iwstats', inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl': net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull] memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/include/asm/string.h:5, net/wireless/wext-core.c: In function 'wext_handle_ioctl': arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way. Marking that function as noinline avoids the warning and leads to slightly smaller object code as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jouni Malinen authored
[ Upstream commit 6f601265 ] TKIP replay protection was skipped for the very first frame received after a new key is configured. While this is potentially needed to avoid dropping a frame in some cases, this does leave a window for replay attacks with group-addressed frames at the station side. Any earlier frame sent by the AP using the same key would be accepted as a valid frame and the internal RSC would then be updated to the TSC from that frame. This would allow multiple previously transmitted group-addressed frames to be replayed until the next valid new group-addressed frame from the AP is received by the station. Fix this by limiting the no-replay-protection exception to apply only for the case where TSC=0, i.e., when this is for the very first frame protected using the new key, and the local RSC had not been set to a higher value when configuring the key (which may happen with GTK). Signed-off-by:
Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi Signed-off-by:
-
Orr Mazor authored
[ Upstream commit 26ec17a1 ] In case a radar event of CAC_FINISHED or RADAR_DETECTED happens during another phy is during CAC we might need to cancel that CAC. If we got a radar in a channel that another phy is now doing CAC on then the CAC should be canceled there. If, for example, 2 phys doing CAC on the same channels, or on comptable channels, once on of them will finish his CAC the other might need to cancel his CAC, since it is no longer relevant. To fix that the commit adds an callback and implement it in mac80211 to end CAC. This commit also adds a call to said callback if after a radar event we see the CAC is no longer relevant Signed-off-by:
Orr Mazor <Orr.Mazor@tandemg.com> Reviewed-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com [slightly reformat/reword commit message] Signed-off-by:
-
Ganapathi Bhat authored
[ Upstream commit c4b9d655 ] Commit e33e2241 ("Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"") fixed a broken regulatory (leaving channel 12 open for AP where not permitted). Apply a similar fix to custom regulatory domain processing. Signed-off-by:
Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com [reword commit message, fix coding style, add a comment] Signed-off-by:
-
Kristian Evensen authored
[ Upstream commit a9ff44f0 ] RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. The normal Quectel quirks apply (DTR and dynamic interface numbers). Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Arnaud Pouliquen authored
[ Upstream commit ce780a47 ] Change mutex and spinlock management to avoid sleep in atomic issue. Signed-off-by:
Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20200113100400.30472-1-arnaud.pouliquen@st.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Manfred Rudigier authored
[ Upstream commit 5365ec1a ] Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Cambda Zhu authored
[ Upstream commit 4fad78ad ] This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Radoslaw Tyl authored
[ Upstream commit aa604651 ] Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 8bea5ac0 ] Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.sk Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Markus Theil authored
[ Upstream commit 02a61449 ] The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric. [ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by:
-
Dave Gerlach authored
[ Upstream commit 03729cfa ] Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit e17e7c49 ] On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 1c226017 ] Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Lee Jones authored
A pointer to 'struct si470x_device' is currently used after free: drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference preceded by free on line 460 Shift the call to free() down past its final use. NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab ("media: si470x-i2c: add missed operations in remove") to the stable trees. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by:kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Michal Koutný authored
commit 3bc0bb36 upstream. The test_cgcore_no_internal_process_constraint_on_threads selftest when running with subsystem controlling noise triggers two warnings: > [ 597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0 > [ 597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160 Both stem from a call to cgroup_type_write. The first warning was also triggered by syzkaller. When we're switching cgroup to threaded mode shortly after a subsystem was disabled on it, we can see the respective subsystem css dying there. The warning in cgroup_apply_control_enable is harmless in this case since we're not adding new subsys anyway. The warning in cgroup_apply_control_disable indicates an attempt to kill css of recently disabled subsystem repeatedly. The commit prevents these situations by making cgroup_type_write wait for all dying csses to go away before re-applying subtree controls. When at it, the locations of WARN_ON_ONCE calls are moved so that warning is triggered only when we are about to misuse the dying css. Reported-by:
<syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com> Reported-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Michal Koutný <mkoutny@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
