- Feb 10, 2021
-
-
Greg Kroah-Hartman authored
Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Igor Matheus Andrade Torrente <igormtorrente@gmail.com> Tested-by:
Jason Self <jason@bluehome.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20210208145810.230485165@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shih-Yuan Lee (FourDollars) authored
commit b4576de8 upstream. The PIN number for Dell headset mode of ALC3271 is wrong. Fixes: fcc6c877 ("ALSA: hda/realtek - Support Dell headset mode for ALC3271") Signed-off-by:
Shih-Yuan Lee (FourDollars) <sylee@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nadav Amit authored
commit 29b32839 upstream. When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f5 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf0174 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf0174 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by:
Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit 81b704d3 upstream. Calling acpi_thermal_check() from acpi_thermal_notify() directly is problematic if _TMP triggers Notify () on the thermal zone for which it has been evaluated (which happens on some systems), because it causes a new acpi_thermal_notify() invocation to be queued up every time and if that takes place too often, an indefinite number of pending work items may accumulate in kacpi_notify_wq over time. Besides, it is not really useful to queue up a new invocation of acpi_thermal_check() if one of them is pending already. For these reasons, rework acpi_thermal_notify() to queue up a thermal check instead of calling acpi_thermal_check() directly and only allow one thermal check to be pending at a time. Moreover, only allow one acpi_thermal_check_fn() instance at a time to run thermal_zone_device_update() for one thermal zone and make it return early if it sees other instances running for the same thermal zone. While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(), as it is only called from there after the other changes made here. [This issue appears to have been exposed by commit 6d25be57 ("sched/core, workqueues: Distangle worker accounting from rq lock"), but it is unclear why it was not visible earlier.] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877 Reported-by:
Stephen Berman <stephen.berman@gmx.net> Diagnosed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
-
Benjamin Valentin authored
commit 9bbd77d5 upstream. There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by:
Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dave Hansen authored
commit 25a068b8 upstream. Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for MFENCE; LFENCE. Short summary: we have special MSRs that have weaker ordering than all the rest. Add fencing consistent with current SDM recommendations. This is not known to cause any issues in practice, only in theory. Longer story below: The reason the kernel uses a different semantic is that the SDM changed (roughly in late 2017). The SDM changed because folks at Intel were auditing all of the recommended fences in the SDM and realized that the x2apic fences were insufficient. Why was the pain MFENCE judged insufficient? WRMSR itself is normally a serializing instruction. No fences are needed because the instruction itself serializes everything. But, there are explicit exceptions for this serializing behavior written into the WRMSR instruction documentation for two classes of MSRs: IA32_TSC_DEADLINE and the X2APIC MSRs. Back to x2apic: WRMSR is *not* serializing in this specific case. But why is MFENCE insufficient? MFENCE makes writes visible, but only affects load/store instructions. WRMSR is unfortunately not a load/store instruction and is unaffected by MFENCE. This means that a non-serializing WRMSR could be reordered by the CPU to execute before the writes made visible by the MFENCE have even occurred in the first place. This means that an x2apic IPI could theoretically be triggered before there is any (visible) data to process. Does this affect anything in practice? I honestly don't know. It seems quite possible that by the time an interrupt gets to consume the (not yet) MFENCE'd data, it has become visible, mostly by accident. To be safe, add the SDM-recommended fences for all x2apic WRMSRs. This also leaves open the question of the _other_ weakly-ordered WRMSR: MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as the x2APIC MSRs, it seems substantially less likely to be a problem in practice. While writes to the in-memory Local Vector Table (LVT) might theoretically be reordered with respect to a weakly-ordered WRMSR like TSC_DEADLINE, the SDM has this to say: In x2APIC mode, the WRMSR instruction is used to write to the LVT entry. The processor ensures the ordering of this write and any subsequent WRMSR to the deadline; no fencing is required. But, that might still leave xAPIC exposed. The safest thing to do for now is to add the extra, recommended LFENCE. [ bp: Massage commit message, fix typos, drop accidentally added newline to tools/arch/x86/include/asm/barrier.h. ] Reported-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.com Signed-off-by:
-
Josh Poimboeuf authored
commit 20bf2b37 upstream. With retpolines disabled, some configurations of GCC, and specifically the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation to the kernel by default. That breaks certain tracing scenarios by adding a superfluous ENDBR64 instruction before the fentry call, for functions which can be called indirectly. CET instrumentation isn't currently necessary in the kernel, as CET is only supported in user space. Disable it unconditionally and move it into the x86's Makefile as CET/CFI... enablement should be a per-arch decision anyway. [ bp: Massage and extend commit message. ] Fixes: 29be86d7 ("kbuild: add -fcf-protection=none when using retpoline flags") Reported-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Hugh Dickins authored
commit 1c2f6730 upstream. Sergey reported deadlock between kswapd correctly doing its usual lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page). This happened when shmem_fallocate(punch hole)'s unmap_mapping_range() reaches zap_pmd_range()'s call to __split_huge_pmd(). The same deadlock could occur when partially truncating a mapped huge tmpfs file, or using fallocate(FALLOC_FL_PUNCH_HOLE) on it. __split_huge_pmd()'s page lock was added in 5.8, to make sure that any concurrent use of reuse_swap_page() (holding page lock) could not catch the anon THP's mapcounts and swapcounts while they were being split. Fortunately, reuse_swap_page() is never applied to a shmem or file THP (not even by khugepaged, which checks PageSwapCache before calling), and anonymous THPs are never created in shmem or file areas: so that __split_huge_pmd()'s page lock can only be necessary for anonymous THPs, on which there is no risk of deadlock with i_mmap_rwsem. Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils Fixes: c444eb56 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()") Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Muchun Song authored
commit ecbf4724 upstream. The page_huge_active() can be called from scan_movable_pages() which do not hold a reference count to the HugeTLB page. So when we call page_huge_active() from scan_movable_pages(), the HugeTLB page can be freed parallel. Then we will trigger a BUG_ON which is in the page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the VM_BUG_ON_PAGE. Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com Fixes: 7e1f049e ("mm: hugetlb: cleanup using paeg_huge_active()") Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Muchun Song authored
commit 0eb2df2b upstream. There is a race between isolate_huge_page() and __free_huge_page(). CPU0: CPU1: if (PageHuge(page)) put_page(page) __free_huge_page(page) spin_lock(&hugetlb_lock) update_and_free_page(page) set_compound_page_dtor(page, NULL_COMPOUND_DTOR) spin_unlock(&hugetlb_lock) isolate_huge_page(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHead(page), page) spin_lock(&hugetlb_lock) page_huge_active(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHuge(page), page) spin_unlock(&hugetlb_lock) When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because it is already freed to the buddy allocator. Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by:
-
Muchun Song authored
commit 585fc0d2 upstream. If a new hugetlb page is allocated during fallocate it will not be marked as active (set_page_huge_active) which will result in a later isolate_huge_page failure when the page migration code would like to move that page. Such a failure would be unexpected and wrong. Only export set_page_huge_active, just leave clear_page_huge_active as static. Because there are no external users. Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com Fixes: 70c3547e (hugetlbfs: add hugetlbfs_fallocate()) Signed-off-by:
-
Russell King authored
commit 39d3454c upstream. Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Fengnan Chang authored
commit f92e04f7 upstream. When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by:
Fengnan Chang <fengnanchang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Aurelien Aptel authored
commit 21b200d0 upstream. Assuming - //HOST/a is mounted on /mnt - //HOST/b is mounted on /mnt/b On a slow connection, running 'df' and killing it while it's processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS. This triggers the following chain of events: => the dentry revalidation fail => dentry is put and released => superblock associated with the dentry is put => /mnt/b is unmounted This patch makes cifs_d_revalidate() return the error instead of 0 (invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file deleted) and ESTALE (file recreated). Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Suggested-by:
Shyam Prasad N <nspmangalore@gmail.com> Reviewed-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Mathias Nyman authored
commit d4a61063 upstream. xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by:
Andreas Hartmann <andihartmann@01019freenet.de> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by:
-
Wang ShaoBo authored
commit 0188b878 upstream. Our system encountered a re-init error when re-registering same kretprobe, where the kretprobe_instance in rp->free_instances is illegally accessed after re-init. Implementation to avoid re-registration has been introduced for kprobe before, but lags for register_kretprobe(). We must check if kprobe has been re-registered before re-initializing kretprobe, otherwise it will destroy the data struct of kretprobe registered, which can lead to memory leak, system crash, also some unexpected behaviors. We use check_kprobe_rereg() to check if kprobe has been re-registered before running register_kretprobe()'s body, for giving a warning message and terminate registration process. Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com Cc: stable@vger.kernel.org Fixes: 1f0ab409 ("kprobes: Prevent re-registration of the same kprobe") [ The above commit should have been done for kretprobes too ] Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by:
Cheng Jian <cj.chengjian@huawei.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Felix Fietkau authored
commit 18fe0fae upstream. If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Heiko Stuebner authored
commit f670e9f9 upstream. dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve the endpoint for the index provided in the wIndex request param. In a test-case with a rndis gadget running and sending a malformed packet to it like: dev.ctrl_transfer( 0x82, # bmRequestType 0x00, # bRequest 0x0000, # wValue 0x0001, # wIndex 0x00 # wLength ) it is possible to cause a crash: [ 217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS [ 217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088 ... [ 218.313189] Call trace: [ 218.330217] ep_from_windex+0x3c/0x54 [ 218.348565] usb_gadget_giveback_request+0x10/0x20 [ 218.368056] dwc2_hsotg_complete_request+0x144/0x184 This happens because ep_from_windex wants to compare the endpoint direction even if index_to_ep() didn't return an endpoint due to the direction not matching. The fix is easy insofar that the actual direction check is already happening when calling index_to_ep() which will return NULL if there is no endpoint for the targeted direction, so the offending check can go away completely. Fixes: c6f5c050 ("usb: dwc2: gadget: add bi-directional endpoint support") Cc: stable@vger.kernel.org Reported-by:
Gerhard Klostermeier <gerhard.klostermeier@syss.de> Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de Signed-off-by:
-
Jeremy Figgins authored
commit d8c6edfa upstream. Some devices, such as the Winbond Electronics Corp. Virtual Com Port (Vendor=0416, ProdId=5011), lockup when usb_set_interface() or usb_clear_halt() are called. This device has only a single altsetting, so it should not be necessary to call usb_set_interface(). Acked-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
Jeremy Figgins <kernel@jeremyfiggins.com> Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 3e1f4a2e upstream. This code should return -ENOMEM if the allocation fails but it currently returns success. Fixes: 9b95236e ("usb: gadget: ether: allocate and init otg descriptor by otg capabilities") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKE9rqVuJEOUWpW@mwanda Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 6e7b64b9 upstream. kernel/elfcore.c only contains weak symbols, which triggers a bug with clang in combination with recordmcount: Cannot find symbol for section 2: .text. kernel/elfcore.o: failed Move the empty stubs into linux/elfcore.h as inline functions. As only two architectures use these, just use the architecture specific Kconfig symbols to key off the declaration. Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Barret Rhoden <brho@google.com> Signed-off-by:
-
Xie He authored
[ Upstream commit 88c7a9fd ] When sending a packet, we will prepend it with an LAPB header. This modifies the shared parts of a cloned skb, so we should copy the skb rather than just clone it, before we prepend the header. In "Documentation/networking/driver.rst" (the 2nd point), it states that drivers shouldn't modify the shared parts of a cloned skb when transmitting. The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called when an skb is being sent, clones the skb and sents the clone to AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte pseudo-header before handing over the skb to us, if we don't copy the skb before prepending the LAPB header, the first byte of the packets received on AF_PACKET sockets can be corrupted. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexey Dobriyan authored
[ Upstream commit a3a9060e ] g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c6 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by:
-
Christoph Schemmel authored
commit e478d602 upstream. Adding support for Cinterion device MV31 for enumeration with PID 0x00B3 and 0x00B7. usb-devices output for 0x00B3 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b3 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option usb-devices output for 0x00B7 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by:
Christoph Schemmel <christoph.schemmel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Chenxin Jin authored
commit 43377df7 upstream. Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is customized with 0988/0578. We need the driver to support the new VID/PID. Signed-off-by:
Chenxin Jin <bg4akv@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Pho Tran authored
commit 3c4f6ecd upstream. Information pid/vid of WSDA-200-USB, Lord corporation company: vid: 199b pid: ba30 Signed-off-by:
Pho Tran <pho.tran@silabs.com> [ johan: amend comment with product name ] Cc: stable@vger.kernel.org Signed-off-by:
-
Sasha Levin authored
Right now SUBLEVEL is overflowing, and some userspace may start treating 4.9.256 as 4.10. While out of tree modules have different ways of extracting the version number (and we're generally ok with breaking them), we do care about breaking userspace and it would appear that this overflow might do just that. Our rules around userspace ABI in the stable kernel are pretty simple: we don't break it. Thus, while userspace may be checking major/minor, it shouldn't be doing anything with sublevel. This patch applies a big band-aid to the 4.9 and 4.4 kernels in the form of clamping their sublevel to 255. The clamp is done for the purpose of LINUX_VERSION_CODE only, and extracting the version number from the Makefile or "make kernelversion" will continue to work as intended. We might need to do it later in newer trees, but maybe we'll have a better solution by then, so I'm ignoring that problem for now. Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 1d489151 ] Thanks to a recent binutils change which doesn't generate unused symbols, it's now possible for thunk_64.o be completely empty without CONFIG_PREEMPTION: no text, no data, no symbols. We could edit the Makefile to only build that file when CONFIG_PREEMPTION is enabled, but that will likely create confusion if/when the thunks end up getting used by some other code again. Just ignore it and move on. Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Tested-by:
-
Brian King authored
[ Upstream commit 76490729 ] While testing live partition mobility, we have observed occasional crashes of the Linux partition. What we've seen is that during the live migration, for specific configurations with large amounts of memory, slow network links, and workloads that are changing memory a lot, the partition can end up being suspended for 30 seconds or longer. This resulted in the following scenario: CPU 0 CPU 1 ------------------------------- ---------------------------------- scsi_queue_rq migration_store -> blk_mq_start_request -> rtas_ibm_suspend_me -> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me _______________________________________V | V -> IPI from CPU 1 -> rtas_percpu_suspend_me -> __rtas_suspend_last_cpu -- Linux partition suspended for > 30 seconds -- -> for_each_online_cpu(cpu) plpar_hcall_norets(H_PROD -> scsi_dispatch_cmd -> scsi_times_out -> scsi_abort_command -> queue_delayed_work -> ibmvfc_queuecommand_lck -> ibmvfc_send_event -> ibmvfc_send_crq - returns H_CLOSED <- returns SCSI_MLQUEUE_HOST_BUSY -> __blk_mq_requeue_request -> scmd_eh_abort_handler -> scsi_try_to_abort_cmd - returns SUCCESS -> scsi_queue_insert Normally, the SCMD_STATE_COMPLETE bit would protect against the command completion and the timeout, but that doesn't work here, since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY path. In this case we end up calling scsi_queue_insert on a request that has already been queued, or possibly even freed, and we crash. The patch below simply increases the default I/O timeout to avoid this race condition. This is also the timeout value that nearly all IBM SAN storage recommends setting as the default value. Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.com Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 622d3b4e ] When using WEP, the default unicast key needs to be selected, instead of the STA PTK. Signed-off-by:
-
Javed Hasan authored
[ Upstream commit b2b0f16f ] A race condition exists between the response handler getting called because of exchange_mgr_reset() (which clears out all the active XIDs) and the response we get via an interrupt. Sequence of events: rport ba0200: Port timeout, state PLOGI rport ba0200: Port entered PLOGI state from PLOGI state xid 1052: Exchange timer armed : 20000 msecs xid timer armed here rport ba0200: Received LOGO request while in state PLOGI rport ba0200: Delete port rport ba0200: work event 3 rport ba0200: lld callback ev 3 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200 bnx2fc: ba0200 - rport not created Yet!! /* Here we reset any outstanding exchanges before freeing rport using the exch_mgr_reset() */ xid 1052: Exchange timer canceled /* Here we got two responses for one xid */ xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 Skip the response if the exchange is already completed. Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.com Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Thomas Gleixner authored
fixup_pi_state_owner() tries to ensure that the state of the rtmutex, pi_state and the user space value related to the PI futex are consistent before returning to user space. In case that the user space value update faults and the fault cannot be resolved by faulting the page in via fault_in_user_writeable() the function returns with -EFAULT and leaves the rtmutex and pi_state owner state inconsistent. A subsequent futex_unlock_pi() operates on the inconsistent pi_state and releases the rtmutex despite not owning it which can corrupt the RB tree of the rtmutex and cause a subsequent kernel stack use after free. It was suggested to loop forever in fixup_pi_state_owner() if the fault cannot be resolved, but that results in runaway tasks which is especially undesired when the problem happens due to a programming error and not due to malice. As the user space value cannot be fixed up, the proper solution is to make the rtmutex and the pi_state consistent so both have the same owner. This leaves the user space value out of sync. Any subsequent operation on the futex will fail because the 10th rule of PI futexes (pi_state owner and user space value are consistent) has been violated. As a consequence this removes the inept attempts of 'fixing' the situation in case that the current task owns the rtmutex when returning with an unresolvable fault by unlocking the rtmutex which left pi_state::owner and rtmutex::owner out of sync in a different and only slightly less dangerous way. Fixes: 1b7558e4 ("futexes: fix fault handling in futex_lock_pi") Reported-by:
<gzobqq@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit f2dac39d ] Too many gotos already and an upcoming fix would make it even more unreadable. Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 6ccc84f9 ] No point in open coding it. This way it gains the extra sanity checks. Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 2156ac19 ] Nothing uses the argument. Remove it as preparation to use pi_state_update_owner(). Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit c5cade20 ] Updating pi_state::owner is done at several places with the same code. Provide a function for it and use that at the obvious places. This is also a preparation for a bug fix to avoid yet another copy of the same code or alternatively introducing a completely unpenetratable mess of gotos. Originally-by:
-
Thomas Gleixner authored
[ Upstream commit 04b79c55 ] If that unexpected case of inconsistent arguments ever happens then the futex state is left completely inconsistent and the printk is not really helpful. Replace it with a warning and make the state consistent. Signed-off-by:
-
Peter Zijlstra authored
commit c1e2f0ea upstream. Julia reported futex state corruption in the following scenario: waiter waker stealer (prio > waiter) futex(WAIT_REQUEUE_PI, uaddr, uaddr2, timeout=[N ms]) futex_wait_requeue_pi() futex_wait_queue_me() freezable_schedule() <scheduled out> futex(LOCK_PI, uaddr2) futex(CMP_REQUEUE_PI, uaddr, uaddr2, 1, 0) /* requeues waiter to uaddr2 */ futex(UNLOCK_PI, uaddr2) wake_futex_pi() cmp_futex_value_locked(uaddr2, waiter) wake_up_q() <woken by waker> <hrtimer_wakeup() fires, clears sleeper->task> futex(LOCK_PI, uaddr2) __rt_mutex_start_proxy_lock() try_to_take_rt_mutex() /* steals lock */ rt_mutex_set_owner(lock, stealer) <preempted> <scheduled in> rt_mutex_wait_proxy_lock() __rt_mutex_slowlock() try_to_take_rt_mutex() /* fails, lock held by stealer */ if (timeout && !timeout->task) return -ETIMEDOUT; fixup_owner() /* lock wasn't acquired, so, fixup_pi_state_owner skipped */ return -ETIMEDOUT; /* At this point, we've returned -ETIMEDOUT to userspace, but the * futex word shows waiter to be the owner, and the pi_mutex has * stealer as the owner */ futex_lock(LOCK_PI, uaddr2) -> bails with EDEADLK, futex word says we're owner. And suggested that what commit: 73d786bd ("futex: Rework inconsistent rt_mutex/futex_q state") removes from fixup_owner() looks to be just what is needed. And indeed it is -- I completely missed that requeue_pi could also result in this case. So we need to restore that, except that subsequent patches, like commit: 16ffa12d ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock") changed all the locking rules. Even without that, the sequence: - if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) { - locked = 1; - goto out; - } - raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock); - owner = rt_mutex_owner(&q->pi_state->pi_mutex); - if (!owner) - owner = rt_mutex_next_owner(&q->pi_state->pi_mutex); - raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock); - ret = fixup_pi_state_owner(uaddr, q, owner); already suggests there were races; otherwise we'd never have to look at next_owner. So instead of doing 3 consecutive wait_lock sections with who knows what races, we do it all in a single section. Additionally, the usage of pi_state->owner in fixup_owner() was only safe because only the rt_mutex owner would modify it, which this additional case wrecks. Luckily the values can only change away and not to the value we're testing, this means we can do a speculative test and double check once we have the wait_lock. Fixes: 73d786bd ("futex: Rework inconsistent rt_mutex/futex_q state") Reported-by:
Julia Cartwright <julia@ni.com> Reported-by:
Gratian Crisan <gratian.crisan@ni.com> Signed-off-by:
-
Peter Zijlstra authored
[Upstream commit 73d786bd ] There is a weird state in the futex_unlock_pi() path when it interleaves with a concurrent futex_lock_pi() at the point where it drops hb->lock. In this case, it can happen that the rt_mutex wait_list and the futex_q disagree on pending waiters, in particular rt_mutex will find no pending waiters where futex_q thinks there are. In this case the rt_mutex unlock code cannot assign an owner. The futex side fixup code has to cleanup the inconsistencies with quite a bunch of interesting corner cases. Simplify all this by changing wake_futex_pi() to return -EAGAIN when this situation occurs. This then gives the futex_lock_pi() code the opportunity to continue and the retried futex_unlock_pi() will now observe a coherent state. The only problem is that this breaks RT timeliness guarantees. That is, consider the following scenario: T1 and T2 are both pinned to CPU0. prio(T2) > prio(T1) CPU0 T1 lock_pi() queue_me() <- Waiter is visible preemption T2 unlock_pi() loops with -EAGAIN forever Which is undesirable for PI primitives. Future patches will rectify this. Signed-off-by:
-
Peter Zijlstra authored
These are unused and clutter up the code. Signed-off-by:
-
