- Apr 10, 2021
-
-
Greg Kroah-Hartman authored
Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Jason Self <jason@bluehome.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20210409095259.624577828@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Angelo Dureghello authored
commit 47c5e474 upstream. For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27c ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org Signed-off-by:
Angelo Dureghello <angelo@kernel-space.org> [mkl: use if instead of ? operator] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Cc: Koen Vandeputte <koen.vandeputte@citymesh.com> Signed-off-by:
-
Masahiro Yamada authored
commit ea29b20a upstream. I read the commit log of the following two: - bc083a64 ("init/Kconfig: make COMPILE_TEST depend on !UML") - 334ef6ed ("init/Kconfig: make COMPILE_TEST depend on !S390") Both are talking about HAS_IOMEM dependency missing in many drivers. So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me. This does not change the behavior of UML. UML still cannot enable COMPILE_TEST because it does not provide HAS_IOMEM. The current dependency for S390 is too strong. Under the condition of CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST. I also removed the meaningless 'default n'. Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KP Singh <kpsingh@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Quentin Perret <qperret@google.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Heiko Carstens authored
commit 334ef6ed upstream. While allmodconfig and allyesconfig build for s390 there are also various bots running compile tests with randconfig, where PCI is disabled. This reveals that a lot of drivers should actually depend on HAS_IOMEM. Adding this to each device driver would be a never ending story, therefore just disable COMPILE_TEST for s390. The reasoning is more or less the same as described in commit bc083a64 ("init/Kconfig: make COMPILE_TEST depend on !UML"). Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Shih-Yuan Lee (FourDollars) authored
commit 8df4b003 upstream The initial pin configs for Dell headset mode of ALC3271 has changed. /sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.1.4) 0x12 0xb7a60130 0x13 0xb8a61140 0x14 0x40000000 0x16 0x411111f0 0x17 0x90170110 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4087992d 0x1e 0x411111f0 0x21 0x04211020 has changed to ... /sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.2.0) 0x12 0xb7a60130 0x13 0x40000000 0x14 0x411111f0 0x16 0x411111f0 0x17 0x90170110 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4067992d 0x1e 0x411111f0 0x21 0x04211020 Fixes: b4576de8 ("ALSA: hda/realtek - Fix typo of pincfg for Dell quirk") Signed-off-by:
Shih-Yuan Lee (FourDollars) <sylee@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Piotr Krysiuk authored
commit e4d4d456 upstream. The branch displacement logic in the BPF JIT compilers for x86 assumes that, for any generated branch instruction, the distance cannot increase between optimization passes. But this assumption can be violated due to how the distances are computed. Specifically, whenever a backward branch is processed in do_jit(), the distance is computed by subtracting the positions in the machine code from different optimization passes. This is because part of addrs[] is already updated for the current optimization pass, before the branch instruction is visited. And so the optimizer can expand blocks of machine code in some cases. This can confuse the optimizer logic, where it assumes that a fixed point has been reached for all machine code blocks once the total program size stops changing. And then the JIT compiler can output abnormal machine code containing incorrect branch displacements. To mitigate this issue, we assert that a fixed point is reached while populating the output image. This rejects any problematic programs. The issue affects both x86-32 and x86-64. We mitigate separately to ease backporting. Signed-off-by:
Piotr Krysiuk <piotras@gmail.com> Reviewed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 219481a8 ] Make SMB2 not print out an error when an oplock break is received for an unknown handle, similar to SMB1. The debug message which is printed for these unknown handles may also be misleading, so fix that too. The SMB2 lease break path is not affected by this patch. Without this, a program which writes to a file from one thread, and opens, reads, and writes the same file from another thread triggers the below errors several times a minute when run against a Samba server configured with "smb2 leases = no". CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2 00000000: 424d53fe 00000040 00000000 00000012 .SMB@........... 00000010: 00000001 00000000 ffffffff ffffffff ................ 00000020: 00000000 00000000 00000000 00000000 ................ 00000030: 00000000 00000000 00000000 00000000 ................ Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Tom Talpey <tom@talpey.com> Reviewed-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ronnie Sahlberg authored
[ Upstream commit cee8f4f6 ] RHBZ: 1933527 Under SMB1 + POSIX, if an inode is reused on a server after we have read and cached a part of a file, when we then open the new file with the re-cycled inode there is a chance that we may serve the old data out of cache to the application. This only happens for SMB1 (deprecated) and when posix are used. The simplest solution to avoid this race is to force a revalidate on smb1-posix open. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
-
Sergei Trofimovich authored
[ Upstream commit f2a419cf ] The sleep warning happens at early boot right at secondary CPU activation bootup: smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1 As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op. Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
Martin Wilck authored
[ Upstream commit 36fa766f ] If pscsi_map_sg() fails, make sure to drop references to already allocated bios. Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 9fcb51c1 ] The new Ubuntu GCC packages turn on -fcf-protection globally, which causes a build failure in the x86 realmode code: cc1: error: ‘-fcf-protection’ is not compatible with this target Turn it off explicitly on compilers that understand this option. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org Signed-off-by:
-
Rob Clark authored
[ Upstream commit 7ad48d27 ] We have seen a couple cases where low memory situations cause something bad to happen, followed by a flood of these messages obscuring the root cause. Lets ratelimit the dmesg spam so that next time it happens we don't lose the kernel traces leading up to this. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Karthikeyan Kathirvel authored
[ Upstream commit 041c881a ] Even if the first channel from sband channel list is invalid or disabled mac80211 ends up choosing it as the default channel for monitor interfaces, making them not usable. Fix this by assigning the first available valid or enabled channel instead. Signed-off-by:
Karthikeyan Kathirvel <kathirve@codeaurora.org> Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org [reword commit message, comment, code cleanups] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tong Zhang authored
[ Upstream commit a9f81244 ] setup_fritz() in avmfritz.c might fail with -EIO and in this case the isac.type and isac.write_reg is not initialized and remains 0(NULL). A subsequent call to isac_release() will dereference isac->write_reg and crash. [ 1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.737809] #PF: supervisor instruction fetch in kernel mode [ 1.738106] #PF: error_code(0x0010) - not-present page [ 1.738378] PGD 0 P4D 0 [ 1.738515] Oops: 0010 [#1] SMP NOPTI [ 1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78 [ 1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p rebuilt.qemu.org 04/01/2014 [ 1.739664] RIP: 0010:0x0 [ 1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202 [ 1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027 [ 1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800 [ 1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808 [ 1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840 [ 1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000 [ 1.742351] FS: 00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 1.742774] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0 [ 1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.744206] Call Trace: [ 1.744339] isac_release+0xcc/0xe0 [mISDNipac] [ 1.744582] fritzpci_probe.cold+0x282/0x739 [avmfritz] [ 1.744861] local_pci_probe+0x48/0x80 [ 1.745063] pci_device_probe+0x10f/0x1c0 [ 1.745278] really_probe+0xfb/0x420 [ 1.745471] driver_probe_device+0xe9/0x160 [ 1.745693] device_driver_attach+0x5d/0x70 [ 1.745917] __driver_attach+0x8f/0x150 [ 1.746123] ? device_driver_attach+0x70/0x70 [ 1.746354] bus_for_each_dev+0x7e/0xc0 [ 1.746560] driver_attach+0x1e/0x20 [ 1.746751] bus_add_driver+0x152/0x1f0 [ 1.746957] driver_register+0x74/0xd0 [ 1.747157] ? 0xffffffffc00d8000 [ 1.747334] __pci_register_driver+0x54/0x60 [ 1.747562] AVM_init+0x36/0x1000 [avmfritz] [ 1.747791] do_one_initcall+0x48/0x1d0 [ 1.747997] ? __cond_resched+0x19/0x30 [ 1.748206] ? kmem_cache_alloc_trace+0x390/0x440 [ 1.748458] ? do_init_module+0x28/0x250 [ 1.748669] do_init_module+0x62/0x250 [ 1.748870] load_module+0x23ee/0x26a0 [ 1.749073] __do_sys_finit_module+0xc2/0x120 [ 1.749307] ? __do_sys_finit_module+0xc2/0x120 [ 1.749549] __x64_sys_finit_module+0x1a/0x20 [ 1.749782] do_syscall_64+0x38/0x90 Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Pavel Andrianov authored
[ Upstream commit 0571a753 ] pxa168_eth_remove() firstly calls unregister_netdev(), then cancels a timeout work. unregister_netdev() shuts down a device interface and removes it from the kernel tables. If the timeout occurs in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop and open of the device. It may lead to an inconsistent state and memory leaks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Pavel Andrianov <andrianov@ispras.ru> Signed-off-by:
-
- Apr 07, 2021
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210405085018.871387942@linuxfoundation.org Signed-off-by:
-
Paul Moore authored
commit 3054d067 upstream. If audit_list_rules_send() fails when trying to create a new thread to send the rules it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error patch and renames audit_send_list() to audit_send_list_thread() to better match its cousin, audit_send_reply_thread(). Reported-by:
<teroincn@gmail.com> Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Cc: <stable@vger.kernel.org> # 4.9.x Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
-
Paul Moore authored
commit a48b284b upstream. If audit_send_reply() fails when trying to create a new thread to send the reply it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error path and makes a handful of other cleanups that came up while fixing the code. Reported-by:
-
Atul Gopinathan authored
commit e78836ae upstream. The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4 bytes in total while the operations performed on this array through-out the code base are only 2 bytes. The "CcxRmState" field is fed only 2 bytes of data using memcpy(): (In rtllib_rx.c:1972) memcpy(network->CcxRmState, &info_element->data[4], 2) With "info_element->data[]" being a u8 array, if 2 bytes are written into "CcxRmState" (whose one element is u16 size), then the 2 u8 elements from "data[]" gets squashed and written into the first element ("CcxRmState[0]") while the second element ("CcxRmState[1]") is never fed with any data. Same in file rtllib_rx.c:2522: memcpy(dst->CcxRmState, src->CcxRmState, 2); The above line duplicates "src" data to "dst" but only writes 2 bytes (and not 4, which is the actual size). Again, only 1st element gets the value while the 2nd element remains uninitialized. This later makes operations done with CcxRmState unpredictable in the following lines as the 1st element is having a squashed number while the 2nd element is having an uninitialized random number. rtllib_rx.c:1973: if (network->CcxRmState[0] != 0) rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07; network->MBssidMask is also of type u8 and not u16. Fix this by changing the type of "CcxRmState" from u16 to u8 so that the data written into this array and read from it make sense and are not random values. NOTE: The wrong initialization of "CcxRmState" can be seen in the following commit: commit ecdfa446 ("Staging: add Realtek 8192 PCI wireless driver") The above commit created a file `rtl8192e/ieee80211.h` which used to have the faulty line. The file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib.h` along with additional code in the commit 94a79942 (tagged in Fixes). Fixes: 94a79942 ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by:
Atul Gopinathan <atulgopinathan@gmail.com> Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com Signed-off-by:
-
Atul Gopinathan authored
commit 72ad25fb upstream. The variable "info_element" is of the following type: struct rtllib_info_element *info_element defined in drivers/staging/rtl8192e/rtllib.h: struct rtllib_info_element { u8 id; u8 len; u8 data[]; } __packed; The "len" field defines the size of the "data[]" array. The code is supposed to check if "info_element->len" is greater than 4 and later equal to 6. If this is satisfied then, the last two bytes (the 4th and 5th element of u8 "data[]" array) are copied into "network->CcxRmState". Right now the code uses "memcpy()" with the source as "&info_element[4]" which would copy in wrong and unintended information. The struct "rtllib_info_element" has a size of 2 bytes for "id" and "len", therefore indexing will be done in interval of 2 bytes. So, "info_element[4]" would point to data which is beyond the memory allocated for this pointer (that is, at x+8, while "info_element" has been allocated only from x to x+7 (2 + 6 => 8 bytes)). This patch rectifies this error by using "&info_element->data[4]" which correctly copies the last two bytes of "data[]". NOTE: The faulty line of code came from the following commit: commit ecdfa446 ("Staging: add Realtek 8192 PCI wireless driver") The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c` which had the faulty line of code. This file has been deleted (or possibly renamed) with the contents copied in to a new file `rtl8192e/rtllib_rx.c` along with additional code in the commit 94a79942 (tagged in Fixes). Fixes: 94a79942 ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
commit 4e49bf37 upstream. If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d8195 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by:
-
Oliver Neukum authored
commit e4c77070 upstream. This failure is so common that logging an error here amounts to spamming log files. Reviewed-by:
Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit 08dff274 upstream. Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bd ("cdc-acm: add TIOCMIWAIT") Signed-off-by:
-
Chunfeng Yun authored
commit 6f978a30 upstream. The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d9 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by:
-
Vincent Palatin authored
commit 0bd86049 upstream. This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Zheyu Ma authored
[ Upstream commit 829933ef ] For each device, the nosy driver allocates a pcilynx structure. A use-after-free might happen in the following scenario: 1. Open nosy device for the first time and call ioctl with command NOSY_IOC_START, then a new client A will be malloced and added to doubly linked list. 2. Open nosy device for the second time and call ioctl with command NOSY_IOC_START, then a new client B will be malloced and added to doubly linked list. 3. Call ioctl with command NOSY_IOC_START for client A, then client A will be readded to the doubly linked list. Now the doubly linked list is messed up. 4. Close the first nosy device and nosy_release will be called. In nosy_release, client A will be unlinked and freed. 5. Close the second nosy device, and client A will be referenced, resulting in UAF. The root cause of this bug is that the element in the doubly linked list is reentered into the list. Fix this bug by adding a check before inserting a client. If a client is already in the linked list, don't insert it. The following KASAN report reveals it: BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210 Write of size 8 at addr ffff888102ad7360 by task poc CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: nosy_release+0x1ea/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 337: nosy_open+0x154/0x4d0 misc_open+0x2ec/0x410 chrdev_open+0x20d/0x5a0 do_dentry_open+0x40f/0xe80 path_openat+0x1cf9/0x37b0 do_filp_open+0x16d/0x390 do_sys_openat2+0x11d/0x360 __x64_sys_open+0xfd/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 337: kfree+0x8f/0x210 nosy_release+0x158/0x210 __fput+0x1e2/0x840 task_work_run+0xe8/0x180 exit_to_user_mode_prepare+0x114/0x120 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380) [ Modified to use 'list_empty()' inside proper lock - Linus ] Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/ Reported-and-tested-by:
马哲宇 (Zheyu Ma) <zheyuma97@gmail.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit d3bdd1c3 ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6 ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Wang Panzhenzhuan authored
commit c971af25 upstream. The restore in resume should match to suspend which only set for RK3288 SoCs pinctrl. Fixes: 8dca9331 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume") Reviewed-by:
Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Wang Panzhenzhuan <randy.wang@rock-chips.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tetsuo Handa authored
commit 5e46d1b7 upstream. syzbot is reporting NULL pointer dereference at reiserfs_security_init() [1], for commit ab17c4f0 ("reiserfs: fixup xattr_root caching") is assuming that REISERFS_SB(s)->xattr_root != NULL in reiserfs_xattr_jcreate_nblocks() despite that commit made REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL case possible. I guess that commit 6cb4aff0 ("reiserfs: fix oops while creating privroot with selinux enabled") wanted to check xattr_root != NULL before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking about the xattr root. The issue is that while creating the privroot during mount reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which dereferences the xattr root. The xattr root doesn't exist, so we get an oops. Therefore, update reiserfs_xattrs_initialized() to check both the privroot and the xattr root. Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1] Reported-and-tested-by:
syzbot <syzbot+690cb1e51970435f9775@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 6cb4aff0 ("reiserfs: fix oops while creating privroot with selinux enabled") Acked-by:
Jeff Mahoney <jeffm@suse.com> Acked-by:
Jan Kara <jack@suse.com> Signed-off-by:
-
Ilya Lipnitskiy authored
commit e720e7d0 upstream. There are code paths that rely on zero_pfn to be fully initialized before core_initcall. For example, wq_sysfs_init() is a core_initcall function that eventually results in a call to kernel_execve, which causes a page fault with a subsequent mmput. If zero_pfn is not initialized by then it may not get cleaned up properly and result in an error: BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1 Here is an analysis of the race as seen on a MIPS device. On this particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until initialized, at which point it becomes PFN 5120: 1. wq_sysfs_init calls into kobject_uevent_env at core_initcall: kobject_uevent_env+0x7e4/0x7ec kset_register+0x68/0x88 bus_register+0xdc/0x34c subsys_virtual_register+0x34/0x78 wq_sysfs_init+0x1c/0x4c do_one_initcall+0x50/0x1a8 kernel_init_freeable+0x230/0x2c8 kernel_init+0x10/0x100 ret_from_kernel_thread+0x14/0x1c 2. kobject_uevent_env() calls call_usermodehelper_exec() which executes kernel_execve asynchronously. 3. Memory allocations in kernel_execve cause a page fault, bumping the MM reference counter: add_mm_counter_fast+0xb4/0xc0 handle_mm_fault+0x6e4/0xea0 __get_user_pages.part.78+0x190/0x37c __get_user_pages_remote+0x128/0x360 get_arg_page+0x34/0xa0 copy_string_kernel+0x194/0x2a4 kernel_execve+0x11c/0x298 call_usermodehelper_exec_async+0x114/0x194 4. In case zero_pfn has not been initialized yet, zap_pte_range does not decrement the MM_ANONPAGES RSS counter and the BUG message is triggered shortly afterwards when __mmdrop checks the ref counters: __mmdrop+0x98/0x1d0 free_bprm+0x44/0x118 kernel_execve+0x160/0x1d8 call_usermodehelper_exec_async+0x114/0x194 ret_from_kernel_thread+0x14/0x1c To avoid races such as described above, initialize init_zero_pfn at early_initcall level. Depending on the architecture, ZERO_PAGE is either constant or gets initialized even earlier, at paging_init, so there is no issue with initializing zero_pfn earlier. Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com Signed-off-by:
Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: stable@vger.kernel.org Tested-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 9deb193a upstream. Commit cbc3b92c fixed an issue to modify the macros of the stack trace event so that user space could parse it properly. Originally the stack trace format to user space showed that the called stack was a dynamic array. But it is not actually a dynamic array, in the way that other dynamic event arrays worked, and this broke user space parsing for it. The update was to make the array look to have 8 entries in it. Helper functions were added to make it parse it correctly, as the stack was dynamic, but was determined by the size of the event stored. Although this fixed user space on how it read the event, it changed the internal structure used for the stack trace event. It changed the array size from [0] to [8] (added 8 entries). This increased the size of the stack trace event by 8 words. The size reserved on the ring buffer was the size of the stack trace event plus the number of stack entries found in the stack trace. That commit caused the amount to be 8 more than what was needed because it did not expect the caller field to have any size. This produced 8 entries of garbage (and reading random data) from the stack trace event: <idle>-0 [002] d... 1976396.837549: <stack trace> => trace_event_raw_event_sched_switch => __traceiter_sched_switch => __schedule => schedule_idle => do_idle => cpu_startup_entry => secondary_startup_64_no_verify => 0xc8c5e150ffff93de => 0xffff93de => 0 => 0 => 0xc8c5e17800000000 => 0x1f30affff93de => 0x00000004 => 0x200000000 Instead, subtract the size of the caller field from the size of the event to make sure that only the amount needed to store the stack trace is reserved. Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/ Cc: stable@vger.kernel.org Fixes: cbc3b92c ("tracing: Set kernel_stack's caller size properly") Reported-by:
Vasily Gorbik <gor@linux.ibm.com> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Hui Wang authored
commit e54f30be upstream. We found the alc_update_headset_mode() is not called on some machines when unplugging the headset, as a result, the mode of the ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type is not cleared, if users plug a differnt type of headset next time, the determine_headset_type() will not be called and the audio jack is set to the headset type of previous time. On the Dell machines which connect the dmic to the PCH, if we open the gnome-sound-setting and unplug the headset, this issue will happen. Those machines disable the auto-mute by ucm and has no internal mic in the input source, so the update_headset_mode() will not be called by cap_sync_hook or automute_hook when unplugging, and because the gnome-sound-setting is opened, the codec will not enter the runtime_suspend state, so the update_headset_mode() will not be called by alc_resume when unplugging. In this case the hp_automute_hook is called when unplugging, so add update_headset_mode() calling to this function. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com Signed-off-by:
-
Ikjoon Jang authored
commit 625bd5a6 upstream. Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request. This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by:
Ikjoon Jang <ikjn@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org Signed-off-by:
-
Jesper Dangaard Brouer authored
commit 6306c118 upstream. Multiple BPF-helpers that can manipulate/increase the size of the SKB uses __bpf_skb_max_len() as the max-length. This function limit size against the current net_device MTU (skb->dev->mtu). When a BPF-prog grow the packet size, then it should not be limited to the MTU. The MTU is a transmit limitation, and software receiving this packet should be allowed to increase the size. Further more, current MTU check in __bpf_skb_max_len uses the MTU from ingress/current net_device, which in case of redirects uses the wrong net_device. This patch keeps a sanity max limit of SKB_MAX_ALLOC (16KiB). The real limit is elsewhere in the system. Jesper's testing[1] showed it was not possible to exceed 8KiB when expanding the SKB size via BPF-helper. The limiting factor is the define KMALLOC_MAX_CACHE_SIZE which is 8192 for SLUB-allocator (CONFIG_SLUB) in-case PAGE_SIZE is 4096. This define is in-effect due to this being called from softirq context see code __gfp_pfmemalloc_flags() and __do_kmalloc_node(). Jakub's testing showed that frames above 16KiB can cause NICs to reset (but not crash). Keep this sanity limit at this level as memory layer can differ based on kernel config. [1] https://github.com/xdp-project/bpf-examples/tree/master/MTU-tests Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/161287788936.790810.2937823995775097177.stgit@firesoul Signed-off-by:
-
Tong Zhang authored
[ Upstream commit 62e69bc4 ] lmc set sc->lmc_media pointer when there is a matching device. However, when no matching device is found, this pointer is NULL and the following dereference will result in a null-ptr-deref. To fix this issue, unregister the hdlc device and return an error. [ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95 [ 4.570102] [ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94 [ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4 [ 4.571125] Call Trace: [ 4.571261] dump_stack+0x7d/0xa3 [ 4.571445] kasan_report.cold+0x10c/0x10e [ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc] [ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc] [ 4.572432] local_pci_probe+0x6f/0xb0 [ 4.572639] pci_device_probe+0x171/0x240 [ 4.572857] ? pci_device_remove+0xe0/0xe0 [ 4.573080] ? kernfs_create_link+0xb6/0x110 [ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.573598] really_probe+0x161/0x420 [ 4.573799] driver_probe_device+0x6d/0xd0 [ 4.574022] device_driver_attach+0x82/0x90 [ 4.574249] ? device_driver_attach+0x90/0x90 [ 4.574485] __driver_attach+0x60/0x100 [ 4.574694] ? device_driver_attach+0x90/0x90 [ 4.574931] bus_for_each_dev+0xe1/0x140 [ 4.575146] ? subsys_dev_iter_exit+0x10/0x10 [ 4.575387] ? klist_node_init+0x61/0x80 [ 4.575602] bus_add_driver+0x254/0x2a0 [ 4.575812] driver_register+0xd3/0x150 [ 4.576021] ? 0xffffffffc0018000 [ 4.576202] do_one_initcall+0x84/0x250 [ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.576733] ? unpoison_range+0xf/0x30 [ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.577219] ? unpoison_range+0xf/0x30 [ 4.577423] ? unpoison_range+0xf/0x30 [ 4.577628] do_init_module+0xf8/0x350 [ 4.577833] load_module+0x3fe6/0x4340 [ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.578526] ? module_frob_arch_sections+0x20/0x20 [ 4.578787] ? __do_sys_finit_module+0x108/0x170 [ 4.579037] __do_sys_finit_module+0x108/0x170 [ 4.579278] ? __ia32_sys_init_module+0x40/0x40 [ 4.579523] ? file_open_root+0x200/0x200 [ 4.579742] ? do_sys_open+0x85/0xe0 [ 4.579938] ? filp_open+0x50/0x50 [ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130 [ 4.580390] do_syscall_64+0x33/0x40 [ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.580859] RIP: 0033:0x7f1a724c3cf7 [ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891 [ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7 [ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003 [ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0 [ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001 [ 4.584349] ================================================================== Signed-off-by:
-
Doug Brown authored
[ Upstream commit 39935dcc ] If a DDP broadcast packet is sent out to a non-gateway target, it is also looped back. There is a potential for the loopback device to have a longer hardware header length than the original target route's device, which can result in the skb not being created with enough room for the loopback device's hardware header. This patch fixes the issue by determining that a loopback will be necessary prior to allocating the skb, and if so, ensuring the skb has enough room. This was discovered while testing a new driver that creates a LocalTalk network interface (LTALK_HLEN = 1). It caused an skb_under_panic. Signed-off-by:
Doug Brown <doug@schmorgal.com> Signed-off-by:
-
zhangyi (F) authored
[ Upstream commit 5dccdc5a ] In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput(). Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Sameer Pujar authored
[ Upstream commit dbf54a95 ] Simple-card/audio-graph-card drivers do not handle MCLK clock when it is specified in the codec device node. The expectation here is that, the codec should actually own up the MCLK clock and do necessary setup in the driver. Suggested-by:
Mark Brown <broonie@kernel.org> Suggested-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com Signed-off-by:
-
Tong Zhang authored
[ Upstream commit d2d106fe ] request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq() [ 1.565966] name 'pci-das6402/16' [ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.574200] Call Trace: [ 1.574722] proc_mkdir+0x18/0x20 [ 1.576629] request_threaded_irq+0xfe/0x160 [ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64] Suggested-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
-
Tong Zhang authored
[ Upstream commit 2e5848a3 ] request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq() [ 1.630764] name 'pci-das1602/16' [ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.639441] Call Trace: [ 1.639976] proc_mkdir+0x18/0x20 [ 1.641946] request_threaded_irq+0xfe/0x160 [ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas] Suggested-by:
-
