- Dec 29, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211227151320.801714429@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rémi Denis-Courmont authored
commit 75a2f315 upstream. This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object. Reported-by:
<syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com> Signed-off-by:
Rémi Denis-Courmont <remi@remlab.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Lin Ma authored
commit b2f37aea upstream. The previous commit 3e0588c2 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Lin Ma authored
commit 3e0588c2 upstream. There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by:
-
Lin Ma authored
commit 1ade48d0 upstream. The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur. static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... } static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... } Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending. Signed-off-by:
Hanjie Wu <nagi@zju.edu.cn> Signed-off-by:
-
Guenter Roeck authored
commit cdc5287a upstream. Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by:
-
Guenter Roeck authored
commit da7dc056 upstream. Tests with a real chip and a closer look into the datasheet reveals that the local and remote critical alarm status bits are swapped for MAX6680/MAX6681. Signed-off-by:
-
Guodong Liu authored
commit 2d5446da upstream. When eint virtual eint number is greater than gpio number, it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue. Signed-off-by:
Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Signed-off-by:
Zhiyong Tao <zhiyong.tao@mediatek.com> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20211110071900.4490-2-zhiyong.tao@mediatek.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 33863534 upstream. alloc_pages_vma() may try to allocate THP page on the local NUMA node first: page = __alloc_pages_node(hpage_node, gfp | __GFP_THISNODE | __GFP_NORETRY, order); And if the allocation fails it retries allowing remote memory: if (!page && (gfp & __GFP_DIRECT_RECLAIM)) page = __alloc_pages_node(hpage_node, gfp, order); However, this retry allocation completely ignores memory policy nodemask allowing allocation to escape restrictions. The first appearance of this bug seems to be the commit ac5b2c18 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings"). The bug disappeared later in the commit 89c83fb5 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and reappeared again in slightly different form in the commit 76e654cc ("mm, page_alloc: allow hugepage fallback to remote nodes when madvised") Fix this by passing correct nodemask to the __alloc_pages() call. The demonstration/reproducer of the problem: $ mount -oremount,size=4G,huge=always /dev/shm/ $ echo always > /sys/kernel/mm/transparent_hugepage/defrag $ cat mbind_thp.c #include <unistd.h> #include <sys/mman.h> #include <sys/stat.h> #include <fcntl.h> #include <assert.h> #include <stdlib.h> #include <stdio.h> #include <numaif.h> #define SIZE 2ULL << 30 int main(int argc, char **argv) { int fd; unsigned long long i; char *addr; pid_t pid; char buf[100]; unsigned long nodemask = 1; fd = open("/dev/shm/test", O_RDWR|O_CREAT); assert(fd > 0); assert(ftruncate(fd, SIZE) == 0); addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0); for (i = 0; i < SIZE; i+=4096) { addr[i] = 1; } pid = getpid(); snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid); system(buf); sleep(10000); return 0; } $ gcc mbind_thp.c -o mbind_thp -lnuma $ numactl -H available: 2 nodes (0-1) node 0 cpus: 0 2 node 0 size: 1918 MB node 0 free: 1595 MB node 1 cpus: 1 3 node 1 size: 2014 MB node 1 free: 1731 MB node distances: node 0 1 0: 10 20 1: 20 10 $ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp 7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4 Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com Fixes: ac5b2c18 ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings") Signed-off-by:
Andrey Ryabinin <arbn@yandex-team.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sean Christopherson authored
commit 0ff29701 upstream. Update the documentation for kvm-intel's emulate_invalid_guest_state to rectify the description of KVM's default behavior, and to document that the behavior and thus parameter only applies to L1. Fixes: a27685c3 ("KVM: VMX: Emulate invalid guest state by default") Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-4-seanjc@google.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marian Postevca authored
commit 890d5b40 upstream. When listening for notifications through netlink of a new interface being registered, sporadically, it is possible for the MAC to be read as zero. The zero MAC address lasts a short period of time and then switches to a valid random MAC address. This causes problems for netd in Android, which assumes that the interface is malfunctioning and will not use it. In the good case we get this log: InterfaceController::getCfg() ifName usb0 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002 In the error case we get these logs: InterfaceController::getCfg() ifName usb0 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002 netd : interfaceGetCfg("usb0") netd : interfaceSetCfg() -> ServiceSpecificException (99, "[Cannot assign requested address] : ioctl() failed") The reason for the issue is the order in which the interface is setup, it is first registered through register_netdev() and after the MAC address is set. Fixed by first setting the MAC address of the net_device and after that calling register_netdev(). Fixes: bcd4a1c4 ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by:
Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one Signed-off-by:
-
Chao Yu authored
commit 5598b24efaf4892741c798b425d543e4bed357a1 upstream. As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215235 - Overview page fault in f2fs_setxattr() when mount and operate on corrupted image - Reproduce tested on kernel 5.16-rc3, 5.15.X under root 1. unzip tmp7.zip 2. ./single.sh f2fs 7 Sometimes need to run the script several times - Kernel dump loop0: detected capacity change from 0 to 131072 F2FS-fs (loop0): Found nat_bits in checkpoint F2FS-fs (loop0): Mounted with checkpoint version = 7548c2ee BUG: unable to handle page fault for address: ffffe47bc7123f48 RIP: 0010:kfree+0x66/0x320 Call Trace: __f2fs_setxattr+0x2aa/0xc00 [f2fs] f2fs_setxattr+0xfa/0x480 [f2fs] __f2fs_set_acl+0x19b/0x330 [f2fs] __vfs_removexattr+0x52/0x70 __vfs_removexattr_locked+0xb1/0x140 vfs_removexattr+0x56/0x100 removexattr+0x57/0x80 path_removexattr+0xa3/0xc0 __x64_sys_removexattr+0x17/0x20 do_syscall_64+0x37/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is in __f2fs_setxattr(), we missed to do sanity check on last xattr entry, result in out-of-bound memory access during updating inconsistent xattr data of target inode. After the fix, it can detect such xattr inconsistency as below: F2FS-fs (loop11): inode (7) has invalid last xattr entry, entry_size: 60676 F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has invalid last xattr entry, entry_size: 47736 Cc: stable@vger.kernel.org Reported-by:
Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by:
Chao Yu <chao@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Sumit Garg authoredcommit 18549bf4 upstream. Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer. Fixes: ec185dd3 ("optee: Fix memory leak when failing to register shm pages") Cc: stable@vger.kernel.org Reported-by:
Patrik Lantz <patrik.lantz@axis.com> Signed-off-by:
Sumit Garg <sumit.garg@linaro.org> Reviewed-by:
Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 8536a5ef upstream. The Thumb2 version of the FP exception handling entry code treats the register holding the CP number (R8) differently, resulting in the iWMMXT CP number check to be incorrect. Fix this by unifying the ARM and Thumb2 code paths, and switch the order of the additions of the TI_USED_CP offset and the shifted CP index. Cc: <stable@vger.kernel.org> Fixes: b86040a5 ("Thumb-2: Implementation of the unified start-up and exceptions code") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Ulf Hansson authored
commit 66c915d0 upstream. It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by:
Al Cooper <alcooperx@gmail.com> Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org Signed-off-by:
-
Prathamesh Shete authored
commit 4fc7261d upstream. When CMD13 is sent after switching to HS400ES mode, the bus is operating at either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR. To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host controller CAR clock and the interface clock are rate matched. Signed-off-by:
Prathamesh Shete <pshete@nvidia.com> Acked-by:
-
Fabien Dessenne authored
commit b67210cc upstream. Consider the GPIO controller offset (from "gpio-ranges") to compute the maximum GPIO line number. This fixes an issue where gpio-ranges uses a non-null offset. e.g.: gpio-ranges = <&pinctrl 6 86 10> In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1) Cc: stable@vger.kernel.org Fixes: 67e2996f ("pinctrl: stm32: fix the reported number of GPIO lines per bank") Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211215095808.621716-1-fabien.dessenne@foss.st.com Signed-off-by:
-
Andrew Cooper authored
commit 57690554 upstream. Both __pkru_allows_write() and arch_set_user_pkey_access() shift PKRU_WD_BIT (a signed constant) by up to 30 bits, hitting the sign bit. Use unsigned constants instead. Clearly pkey 15 has not been used in combination with UBSAN yet. Noticed by code inspection only. I can't actually provoke the compiler into generating incorrect logic as far as this shift is concerned. [ dhansen: add stable@ tag, plus minor changelog massaging, For anyone doing backports, these #defines were in arch/x86/include/asm/pgtable.h before 784a4661. ] Fixes: 33a709b2 ("mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys") Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211216000856.4480-1-andrew.cooper3@citrix.com Signed-off-by:
-
John David Anglin authored
commit 8f66fce0 upstream. The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are not clipping the LWS number when we are called from a 32-bit process (W=0). We need to nulify the following depdi instruction when the least-significant bit of %r30 is 1. If the %r20 register is not clipped, a user process could perform a LWS call that would branch to an undefined location in the kernel and potentially crash the machine. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 75d70d76 upstream. If the workqueue allocation fails, the driver is marked as not initialized, and timer and panic_notifier will be left registered. Instead of removing those when workqueue allocation fails, do the workqueue initialization before doing it, and cleanup srcu_struct if it fails. Fixes: 1d49eb91 ("ipmi: Move remove_work to dedicated workqueue") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-2-cascardo@canonical.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Mian Yousaf Kaukab authored
commit 34f35f8f upstream. During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking. Fixes: c4436c91 ("ipmi_ssif: avoid registering duplicate ssif interface") Cc: stable@vger.kernel.org # 5.4.x Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Message-Id: <20211208093239.4432-1-ykaukab@suse.de> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 2b5160b1 upstream. In case, init_srcu_struct fails (because of memory allocation failure), we might proceed with the driver initialization despite srcu_struct not being entirely initialized. Fixes: 913a89f0 ("ipmi: Don't initialize anything in the core until something uses it") Signed-off-by:
-
José Expósito authored
commit 12f247ab upstream. The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Bradley Scott authored
commit d296a74b upstream. HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier initialization as used on several other HP laptops using ALC285. Signed-off-by:
Bradley Scott <Bradley.Scott@zebra.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com Signed-off-by:
-
Colin Ian King authored
commit 2dee54b2 upstream. Static analysis with scan-build has found an assignment to vp2 that is never used. It seems that the check on vp->state > 0 should be actually on vp2->state instead. Fix this. This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git , commit 91e39521bbf6 ("[PATCH] ALSA patch for 2.5.4") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.com Signed-off-by:
-
Xiaoke Wang authored
commit c01c1db1 upstream. kstrdup() can return NULL, it is better to check the return value of it. Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.com Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 16ba51b5 ] Tests with a real chip and a closer look into the datasheet show that MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support of the respective attributes for this chip. Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit attributes to solve the problem. Cc: Josh Lehan <krellan@google.com> Fixes: 229d495d ("hwmon: (lm90) Add max6654 support to lm90 driver") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit f347e249 ] A flag indicating extended temperature support makes it easier to add support for additional chips with this functionality. Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit f8344f76 ] TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac2 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac2 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by:
David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by:
-
Josh Lehan authored
[ Upstream commit 229d495d ] Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by:
Josh Lehan <krellan@google.com> Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit fce15c45 ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42f ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by:
-
Andrea Righi authored
[ Upstream commit 1d72d9f9 ] The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 [ 6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 6.513872] page dumped because: kasan: bad access detected [ 6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame: [ 6.513887] elantech_change_report_id+0x0/0x256 [psmouse] [ 6.513941] this frame has 1 object: [ 6.513947] [32, 34) 'param' [ 6.513956] Memory state around the buggy address: [ 6.513962] ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00 [ 6.513969] ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00 [ 6.513982] ^ [ 6.513988] ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513995] ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00 [ 6.514000] ================================================================== Define param[] in elantech_change_report_id() as an array of 3 bytes to prevent the out-of-bounds access in the stack. Fixes: e4c90627 ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode") BugLink: https://bugs.launchpad.net/bugs/1945590 Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Reviewed-by:
Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20211116095559.24395-1-andrea.righi@canonical.com Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit 9b8bdd1e ] Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit cb93b3e1 ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435 ("smsc: Move the SMC (SMSC) drivers") Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit db6d6afe ] I find that platform_get_irq() will not always succeed. It will return error irq in case of the failure. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by:
-
Fernando Fernandez Mancera authored
[ Upstream commit 1c15b05b ] When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by:
-
Wu Bo authored
[ Upstream commit ffb76a86 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by:
Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 1ed1d592 ] virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr gso_type, to avoid packets getting dropped for lack of a proto type. Its protocol choice is a guess, especially in the case of UFO, where the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6. Skip this best effort if the field is already initialized. Whether explicitly from userspace, or implicitly based on an earlier call to dev_parse_header_protocol (which is more robust, but was introduced after this patch). Fixes: 9d2f67e4 ("net/packet: fix packet drop as of virtio gso") Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.com Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 7e5cced9 ] Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto. Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below commit, UFOv6 packets are dropped due to not matching the protocol as obtained from dev_parse_header_protocol. Invert the test to take that L2 protocol field as starting point and pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP. Fixes: 924a9bc3 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/ Reported-by:
Andrew Melnichenko <andrew@daynix.com> Signed-off-by:
-
Jiasheng Jiang authored
[ Upstream commit 60ec7fcf ] The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c81 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by:
-
