- Jan 15, 2024
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20240113094204.017594027@linuxfoundation.org Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
SeongJae Park <sj@kernel.org> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Ron Economos <re@w6rz.net> Tested-by:
Slade Watkins <srw@sladewatkins.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
kernelci.org bot <bot@kernelci.org> Tested-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
filemap_get_folio works differenty in 6.1 vs. later kernels (returning NULL in 6.1 instead of an error). Add this minor correction which addresses the regression in the patch: cifs: Fix flushing, invalidation and file size with copy_file_range() Link: https://lore.kernel.org/all/a76b370f93cb928c049b94e1fde0d2da506dfcb2.camel@amazon.com/ Reported-by:
"Jitindar Singh, Suraj" <surajjs@amazon.com> Suggested-by:
David Howells <dhowells@redhat.com> Reported-by:
Steve French <stfrench@microsoft.com> Tested-by:
-
Jon Maxwell authored
commit af6d1034 upstream. In ip6_dst_gc() replace: if (entries > gc_thresh) With: if (entries > ops->gc_thresh) Sending Ipv6 packets in a loop via a raw socket triggers an issue where a route is cloned by ip6_rt_cache_alloc() for each packet sent. This quickly consumes the Ipv6 max_size threshold which defaults to 4096 resulting in these warnings: [1] 99.187805] dst_alloc: 7728 callbacks suppressed [2] Route cache is full: consider increasing sysctl net.ipv6.route.max_size. . . [300] Route cache is full: consider increasing sysctl net.ipv6.route.max_size. When this happens the packet is dropped and sendto() gets a network is unreachable error: remaining pkt 200557 errno 101 remaining pkt 196462 errno 101 . . remaining pkt 126821 errno 101 Implement David Aherns suggestion to remove max_size check seeing that Ipv6 has a GC to manage memory usage. Ipv4 already does not check max_size. Here are some memory comparisons for Ipv4 vs Ipv6 with the patch: Test by running 5 instances of a program that sends UDP packets to a raw socket 5000000 times. Compare Ipv4 and Ipv6 performance with a similar program. Ipv4: Before test: MemFree: 29427108 kB Slab: 237612 kB ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 2881 3990 192 42 2 : tunables 0 0 0 During test: MemFree: 29417608 kB Slab: 247712 kB ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 44394 44394 192 42 2 : tunables 0 0 0 After test: MemFree: 29422308 kB Slab: 238104 kB ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0 Ipv6 with patch: Errno 101 errors are not observed anymore with the patch. Before test: MemFree: 29422308 kB Slab: 238104 kB ip6_dst_cache 1912 2528 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0 During Test: MemFree: 29431516 kB Slab: 240940 kB ip6_dst_cache 11980 12064 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0 After Test: MemFree: 29441816 kB Slab: 238132 kB ip6_dst_cache 1902 2432 256 32 2 : tunables 0 0 0 xfrm_dst_cache 0 0 320 25 2 : tunables 0 0 0 ip_dst_cache 3048 4116 192 42 2 : tunables 0 0 0 Tested-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230112012532.311021-1-jmaxwell37@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Cc: "Jitindar Singh, Suraj" <surajjs@amazon.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 03d68ffc which is commit 9f28a971 upstream. It is reported to cause issues, so revert it. Reported-by:
email200202 <email200202@yahoo.com> Link: https://lore.kernel.org/r/e341cb408b5663d8c91b8fa57b41bb984be43448.camel@kernel.org Cc: NeilBrown <neilb@suse.de> Cc: Jeff Layton <jlayton@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit bb4f791c which is commit 2a501f55 upstream. It is reported to cause issues, so revert it. Reported-by:
-
- Jan 10, 2024
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20240108153511.214254205@linuxfoundation.org Tested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Tested-by:
Allen Pais <apais@linux.microsoft.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Sven Joachim <svenjoac@gmx.de> Tested-by:
Kelsey Steele <kelseysteele@linux.microsoft.com> Tested-by:
Yann Sionneau <ysionneau@kalrayinc.com> Tested-by:
-
Amit Pundir authored
This reverts commit 3637f6bd which is commit bfc7db1c upstream. This resulted in boot regression on RB5 (sm8250), causing the device to hard crash into USB crash dump mode everytime. Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Link: https://lkft.validation.linaro.org/scheduler/job/7151629#L4239 Signed-off-by:
-
Kees Cook authored
commit eb3e28c1 upstream. The kernel is globally removing the ambiguous 0-length and 1-element arrays in favor of flexible arrays, so that we can gain both compile-time and run-time array bounds checking[1]. Replace the trailing 1-element array with a flexible array in the following structures: struct smb2_err_rsp struct smb2_tree_connect_req struct smb2_negotiate_rsp struct smb2_sess_setup_req struct smb2_sess_setup_rsp struct smb2_read_req struct smb2_read_rsp struct smb2_write_req struct smb2_write_rsp struct smb2_query_directory_req struct smb2_query_directory_rsp struct smb2_set_info_req struct smb2_change_notify_rsp struct smb2_create_rsp struct smb2_query_info_req struct smb2_query_info_rsp Replace the trailing 1-element array with a flexible array, but leave the existing structure padding: struct smb2_file_all_info struct smb2_lock_req Adjust all related size calculations to match the changes to sizeof(). No machine code output or .data section differences are produced after these changes. [1] For lots of details, see both: https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays https://people.kernel.org/kees/bounded-flexible-arrays-in-c Cc: Steve French <sfrench@samba.org> Cc: Paulo Alcantara <pc@cjr.nz> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Shyam Prasad N <sprasad@microsoft.com> Cc: Tom Talpey <tom@talpey.com> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Reviewed-by:
Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bryan O'Donoghue authoredcommit f910d3ba upstream. Digging into the documentation we find that the DT_ID bitfield is used to map the six bit DT to a two bit ID code. This value is concatenated to the VC bitfield to create a CID value. DT_ID is the two least significant bits of CID and VC the most significant bits. Originally we set dt_id = vc * 4 in and then subsequently set dt_id = vc. commit 3c4ed72a ("media: camss: sm8250: Virtual channels for CSID") silently fixed the multiplication by four which would give a better value for the generated CID without mentioning what was being done or why. Next up I haplessly changed the value back to "dt_id = vc * 4" since there didn't appear to be any logic behind it. Hans asked what the change was for and I honestly couldn't remember the provenance of it, so I dug in. Link: https://lore.kernel.org/linux-arm-msm/edd4bf9b-0e1b-883c-1a4d-50f4102c3924@xs4all.nl/ Add a comment so the next hapless programmer doesn't make this same mistake. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
John Fastabend authored
commit 8d665064 upstream. I added logic to track the sock pair for stream_unix sockets so that we ensure lifetime of the sock matches the time a sockmap could reference the sock (see fixes tag). I forgot though that we allow af_unix unconnected sockets into a sock{map|hash} map. This is problematic because previous fixed expected sk_pair() to exist and did not NULL check it. Because unconnected sockets have a NULL sk_pair this resulted in the NULL ptr dereference found by syzkaller. BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171 Write of size 4 at addr 0000000000000080 by task syz-executor360/5073 Call Trace: <TASK> ... sock_hold include/net/sock.h:777 [inline] unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171 sock_map_init_proto net/core/sock_map.c:190 [inline] sock_map_link+0xb87/0x1100 net/core/sock_map.c:294 sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483 sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577 bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167 We considered just checking for the null ptr and skipping taking a ref on the NULL peer sock. But, if the socket is then connected() after being added to the sockmap we can cause the original issue again. So instead this patch blocks adding af_unix sockets that are not in the ESTABLISHED state. Reported-by:
Eric Dumazet <edumazet@google.com> Reported-by:
<syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com> Fixes: 8866730a ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock") Acked-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
Yonghong Song authored
commit dfce9cb3 upstream. Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9a ("bpf: Support new 32bit offset jmp instruction") added support for new 32bit offset jmp instruction. Unfortunately, in function bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset (plus/minor a small delta) compares to 16-bit offset bound [S16_MIN, S16_MAX], which caused the following verification failure: $ ./test_progs-cpuv4 -t verif_scale_pyperf180 ... insn 10 cannot be patched due to 16-bit range ... libbpf: failed to load object 'pyperf180.bpf.o' scale_test:FAIL:expect_success unexpected error: -12 (errno 12) #405 verif_scale_pyperf180:FAIL Note that due to recent llvm18 development, the patch [2] (already applied in bpf-next) needs to be applied to bpf tree for testing purpose. The fix is rather simple. For 32bit offset branch insn, the adjusted offset compares to [S32_MIN, S32_MAX] and then verification succeeded. [1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev [2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev Fixes: 4cd58e9a ("bpf: Support new 32bit offset jmp instruction") Signed-off-by:
Yonghong Song <yonghong.song@linux.dev> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev Signed-off-by:
-
Vlad Buslov authored
commit 9bc64bd0 upstream. Referenced commit doesn't always set iifidx when offloading the flow to hardware. Fix the following cases: - nf_conn_act_ct_ext_fill() is called before extension is created with nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with unspecified iifidx when connection is offloaded after only single original-direction packet has been processed by tc data path. Always fill the new nf_conn_act_ct_ext instance after creating it in nf_conn_act_ct_ext_add(). - Offloading of unidirectional UDP NEW connections is now supported, but ct flow iifidx field is not updated when connection is promoted to bidirectional which can result reply-direction iifidx to be zero when refreshing the connection. Fill in the extension and update flow iifidx before calling flow_offload_refresh(). Fixes: 9795ded7 ("net/sched: act_ct: Fill offloading tuple iifidx") Reviewed-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Fixes: 6a9bad00 ("net/sched: act_ct: offload UDP NEW connections") Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com Signed-off-by:
-
Vlad Buslov authored
commit a63b6622 upstream. Current nf_flow_is_outdated() implementation considers any flow table flow which state diverged from its underlying CT connection status for teardown which can be problematic in the following cases: - Flow has never been offloaded to hardware in the first place either because flow table has hardware offload disabled (flag NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add' workqueue to be offloaded for the first time. The former is incorrect, the later generates excessive deletions and additions of flows. - Flow is already pending to be updated on the workqueue. Tearing down such flows will also generate excessive removals from the flow table, especially on highly loaded system where the latency to re-offload a flow via 'add' workqueue can be quite high. When considering a flow for teardown as outdated verify that it is both offloaded to hardware and doesn't have any pending updates. Fixes: 41f2c7c3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple") Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Chao Yu authored
commit 091a4dfb upstream. After remount, F2FS_OPTION().compress_level was assgin to LZ4HC_DEFAULT_CLEVEL incorrectly, result in lz4hc:9 was enabled, fix it. 1. mount /dev/vdb /dev/vdb on /mnt/f2fs type f2fs (...,compress_algorithm=lz4,compress_log_size=2,...) 2. mount -t f2fs -o remount,compress_log_size=3 /mnt/f2fs/ 3. mount|grep f2fs /dev/vdb on /mnt/f2fs type f2fs (...,compress_algorithm=lz4:9,compress_log_size=3,...) Fixes: 00e120b5 ("f2fs: assign default compression level") Signed-off-by:
Chao Yu <chao@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Ingo Molnar authored
commit 188a5696 upstream. allnoconfig grew these new build warnings in lib/group_cpus.c: lib/group_cpus.c:247:12: warning: ‘__group_cpus_evenly’ defined but not used [-Wunused-function] lib/group_cpus.c:75:13: warning: ‘build_node_to_cpumask’ defined but not used [-Wunused-function] lib/group_cpus.c:66:13: warning: ‘free_node_to_cpumask’ defined but not used [-Wunused-function] lib/group_cpus.c:43:23: warning: ‘alloc_node_to_cpumask’ defined but not used [-Wunused-function] Widen the #ifdef CONFIG_SMP block to not expose unused helpers on non-SMP builds. Also annotate the preprocessor branches for better readability. Fixes: f7b3ea8c ("genirq/affinity: Move group_cpus_evenly() into lib/") Cc: Ming Lei <ming.lei@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221227022905.352674-6-ming.lei@redhat.com Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wenchao Chen authored
commit 8abf77c8 upstream. Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this. Signed-off-by:
Wenchao Chen <wenchao.chen@unisoc.com> Fixes: ff874dbc ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K") Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 1036f69e upstream. On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __run_timers.part.0+0x1d0/0x1e8 ra : __run_timers.part.0+0x134/0x1e8 epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60 gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000 t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20 s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000 a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60 a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68 s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000 s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0 s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000 s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52 t5 : ffffffd8024ae018 t6 : ffffffd8024ae038 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8 [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a [<ffffffff80809092>] __do_softirq+0xc6/0x1fa [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84 [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28 ---[ end trace 0000000000000000 ]--- What happens? renesas_sdhi_probe() { tmio_mmc_host_alloc() mmc_alloc_host() INIT_DELAYED_WORK(&host->detect, mmc_rescan); devm_request_irq(tmio_mmc_irq); /* * After this, the interrupt handler may be invoked at any time * * tmio_mmc_irq() * { * __tmio_mmc_card_detect_irq() * mmc_detect_change() * _mmc_detect_change() * mmc_schedule_delayed_work(&host->detect, delay); * } */ tmio_mmc_host_probe() tmio_mmc_init_ocr() -EPROBE_DEFER tmio_mmc_host_free() mmc_free_host() } When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer. Fix this by cancelling any pending delayed work before releasing the MMC host structure. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be Signed-off-by:
-
Jorge Ramirez Ortiz authored
commit e7794c14 upstream. When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575 ("mmc: block: Convert RPMB to a character device"). One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it. Fixes: 97548575 ("mmc: block: Convert RPMB to a character device") Signed-off-by:
Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by:
-
Ziyang Huang authored
commit 8c124d99 upstream. Commit 4bc31ede ("mmc: core: Set HS clock speed before sending HS CMD13") set HS clock (52MHz) before switching to HS mode. For this freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9). Then we set rx_clk_phase to 11 or 15 which is out of range and make hardware frozen. After we send command request, no irq will be interrupted and the mmc driver will keep to wait for request finished, even durning rebooting. So let's set it to Phase 90 which should work in most cases. Then let meson_mx_sdhc_execute_tuning() to find the accurate value for data transfer. If this doesn't work, maybe need to define a factor in dts. Fixes: e4bf1b09 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by:
Ziyang Huang <hzyitc@outlook.com> Tested-by:
Anand Moon <linux.amoon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com Signed-off-by:
-
Alex Deucher authored
commit 7e725c20 upstream. This was included in gpu_info firmware, move it into the driver for consistency with other nv1x parts. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318 Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 21f6137c upstream. It's no longer required. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318 Reviewed-by:
-
Jiajun Xie authored
commit 9eab0421 upstream. The bug happens when highest bit of holebegin is 1, suppose holebegin is 0x8000000111111000, after shift, hba would be 0xfff8000000111111, then vma_interval_tree_foreach would look it up fail or leads to the wrong result. error call seq e.g.: - mmap(..., offset=0x8000000111111000) |- syscall(mmap, ... unsigned long, off): |- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT); here pgoff is correctly shifted to 0x8000000111111, but pass 0x8000000111111000 as holebegin to unmap would then cause terrible result, as shown below: - unmap_mapping_range(..., loff_t const holebegin) |- pgoff_t hba = holebegin >> PAGE_SHIFT; /* hba = 0xfff8000000111111 unexpectedly */ The issue happens in Heterogeneous computing, where the device(e.g. gpu) and host share the same virtual address space. A simple workflow pattern which hit the issue is: /* host */ 1. userspace first mmap a file backed VA range with specified offset. e.g. (offset=0x800..., mmap return: va_a) 2. write some data to the corresponding sys page e.g. (va_a = 0xAABB) /* device */ 3. gpu workload touches VA, triggers gpu fault and notify the host. /* host */ 4. reviced gpu fault notification, then it will: 4.1 unmap host pages and also takes care of cpu tlb (use unmap_mapping_range with offset=0x800...) 4.2 migrate sys page to device 4.3 setup device page table and resolve device fault. /* device */ 5. gpu workload continued, it accessed va_a and got 0xAABB. 6. gpu workload continued, it wrote 0xBBCC to va_a. /* host */ 7. userspace access va_a, as expected, it will: 7.1 trigger cpu vm fault. 7.2 driver handling fault to migrate gpu local page to host. 8. userspace then could correctly get 0xBBCC from va_a 9. done But in step 4.1, if we hit the bug this patch mentioned, then userspace would never trigger cpu fault, and still get the old value: 0xAABB. Making holebegin unsigned first fixes the bug. Link: https://lkml.kernel.org/r/20231220052839.26970-1-jiajun.xie.sh@gmail.com Signed-off-by:
Jiajun Xie <jiajun.xie.sh@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Benjamin Bara authored
commit a3368e11 upstream. Since commit aa49c908 ("i2c: core: Run atomic i2c xfer when !preemptible"), the whole reboot/power off sequence on non-preempt kernels is using atomic i2c xfer, as !preemptible() always results to 1. During device_shutdown(), the i2c might be used a lot and not all busses have implemented an atomic xfer handler. This results in a lot of avoidable noise, like: [ 12.687169] No atomic I2C transfer handler for 'i2c-0' [ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118 ... Fix this by allowing non-atomic xfer when the interrupts are enabled, as it was before. Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/ Fixes: aa49c908 ("i2c: core: Run atomic i2c xfer when !preemptible") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
Benjamin Bara <benjamin.bara@skidata.com> Tested-by:
Michael Walle <mwalle@kernel.org> Tested-by:
Tor Vic <torvic9@mailbox.org> [wsa: removed a comment which needs more work, code is ok] Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Jinghao Jia authored
commit f5d03da4 upstream. kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/ Fixes: 6256e668 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: stable@vger.kernel.org Signed-off-by:
Jinghao Jia <jinghao7@illinois.edu> Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards commit ac9184fb upstream. VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge, it appears that accesses to its 'Isochronous Cycle Timer' register (offset 0xf0 on PCI memory space) often causes unexpected system reboot in any type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not appears in the other type of machine (AMD pre-Ryzen machine, Intel machine, at least), or in the other OHCI 1394 hardware (e.g. Texas Instruments). The issue explicitly appears at a commit dcadfd7f ("firewire: core: use union for callback of transaction completion") added to v6.5 kernel. It changed 1394 OHCI driver to access to the register every time to dispatch local asynchronous transaction. However, the issue exists in older version of kernel as long as it runs in AMD Ryzen machine, since the access to the register is required to maintain bus time. It is not hard to imagine that users experience the unexpected system reboot when generating bus reset by plugging any devices in, or reading the register by time-aware application programs; e.g. audio sample processing. This commit suppresses the unexpected system reboot in the combination of hardware. It avoids the access itself. As a result, the software stack can not provide the hardware time anymore to unit drivers, userspace applications, and nodes in the same IEEE 1394 bus. It brings apparent disadvantage since time-aware application programs require it, while time-unaware applications are available again; e.g. sbp2. Cc: stable@vger.kernel.org Reported-by:
Jiri Slaby <jirislaby@kernel.org> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436 Reported-by:
Mario Limonciello <mario.limonciello@amd.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994 Reported-by:
Tobias Gruetzmacher <tobias-lists@23.gs> Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/ Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973 Closes: https://bugs.launchpad.net/linux/+bug/2043905 Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jp Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Mathieu Desnoyers authored
[ Upstream commit dec89008 ] The following race can cause rb_time_read() to observe a corrupted time stamp: rb_time_cmpxchg() [...] if (!rb_time_read_cmpxchg(&t->msb, msb, msb2)) return false; if (!rb_time_read_cmpxchg(&t->top, top, top2)) return false; <interrupted before updating bottom> __rb_time_read() [...] do { c = local_read(&t->cnt); top = local_read(&t->top); bottom = local_read(&t->bottom); msb = local_read(&t->msb); } while (c != local_read(&t->cnt)); *cnt = rb_time_cnt(top); /* If top and msb counts don't match, this interrupted a write */ if (*cnt != rb_time_cnt(msb)) return false; ^ this check fails to catch that "bottom" is still not updated. So the old "bottom" value is returned, which is wrong. Fix this by checking that all three of msb, top, and bottom 2-bit cnt values match. The reason to favor checking all three fields over requiring a specific update order for both rb_time_set() and rb_time_cmpxchg() is because checking all three fields is more robust to handle partial failures of rb_time_cmpxchg() when interrupted by nested rb_time_set(). Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com Fixes: f458a145 ("ring-buffer: Test last update in 32bit version of __rb_time_read()") Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit 6e4b2479 ] len can't ever be negative, so mark it as an u32 instead of int. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Boris Burkov authored
[ Upstream commit 9e65bfca ] The reserved data counter and input parameter is a u64, but we inadvertently accumulate it in an int. Overflowing that int results in freeing the wrong amount of data and breaking reserve accounting. Unfortunately, this overflow rot spreads from there, as the qgroup release/free functions rely on returning an int to take advantage of negative values for error codes. Therefore, the full fix is to return the "released" or "freed" amount by a u64 argument and to return 0 or negative error code via the return value. Most of the call sites simply ignore the return value, though some of them handle the error and count the returned bytes. Change all of them accordingly. CC: stable@vger.kernel.org # 6.1+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Reviewed-by:
-
Rakesh Babu Saladi authored
[ Upstream commit f2e664ad ] Most of the code in CGX/RPM driver assumes that max lmacs per given MAC as always, 4 and the number of MAC blocks also as 4. With this assumption, the max number of interfaces supported is hardcoded to 16. This creates a problem as next gen CN10KB silicon MAC supports 8 lmacs per MAC block. This patch solves the problem by using "max lmac per MAC block" value from constant csrs and uses cgx_cnt_max value which is populated based number of MAC blocks supported by silicon. Signed-off-by:
Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Stable-dep-of: e307b5a8 ("octeontx2-af: Fix pause frame configuration") Signed-off-by:
-
Hariprasad Kelam authored
[ Upstream commit e307b5a8 ] The current implementation's default Pause Forward setting is causing unnecessary network traffic. This patch disables Pause Forward to address this issue. Fixes: 1121f6b0 ("octeontx2-af: Priority flow control configuration support") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit 125f1c7f ] The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40 ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 735795f6 ] Since 41f2c7c3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY back to classic path in every run, ie. every second. This is because of a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct. In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on and IPS_SEEN_REPLY is unreliable since users decide when to offload the flow before, such bit might be set on at a later stage. Fix it by adding a custom .gc handler that sched/act_ct can use to deal with its NF_FLOW_HW_ESTABLISHED bit. Fixes: 41f2c7c3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple") Reported-by:
Vladimir Smelhaus <vl.sm@email.cz> Reviewed-by:
-
Paul Blakey authored
[ Upstream commit 41f2c7c3 ] Currently UNREPLIED and UNASSURED connections are added to the nf flow table. This causes the following connection packets to be processed by the flow table which then skips conntrack_in(), and thus such the connections will remain UNREPLIED and UNASSURED even if reply traffic is then seen. Even still, the unoffloaded reply packets are the ones triggering hardware update from new to established state, and if there aren't any to triger an update and/or previous update was missed, hardware can get out of sync with sw and still mark packets as new. Fix the above by: 1) Not skipping conntrack_in() for UNASSURED packets, but still refresh for hardware, as before the cited patch. 2) Try and force a refresh by reply-direction packets that update the hardware rules from new to established state. 3) Remove any bidirectional flows that didn't failed to update in hardware for re-insertion as bidrectional once any new packet arrives. Fixes: 6a9bad00 ("net/sched: act_ct: offload UDP NEW connections") Co-developed-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit 6a9bad00 ] Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit 1a441a9b ] Modify flow table offload to cache the last ct info status that was passed to the driver offload callbacks by extending enum nf_flow_flags with new "NF_FLOW_HW_ESTABLISHED" flag. Set the flag if ctinfo was 'established' during last act_ct meta actions fill call. This infrastructure change is necessary to optimize promoting of UDP connections from 'new' to 'established' in following patches in this series. Signed-off-by:
-
Vlad Buslov authored
[ Upstream commit 8f84780b ] Modify flow table offload to support unidirectional connections by extending enum nf_flow_flags with new "NF_FLOW_HW_BIDIRECTIONAL" flag. Only offload reply direction when the flag is set. This infrastructure change is necessary to support offloading UDP NEW connections in original direction in following patches in series. Signed-off-by:
-
Xin Long authored
[ Upstream commit 19138941 ] This patch is to make the err path simple by calling tcf_ct_params_free(), so that it won't cause problems when more members are added into param and need freeing on the err path. Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Sumanth Korikkar authored
[ Upstream commit f42ce5f0 ] In add_memory_resource(), creation of memory block devices occurs after successful call to arch_add_memory(). However, creation of memory block devices could fail. In that case, arch_remove_memory() is called to perform necessary cleanup. Currently with or without altmap support, arch_remove_memory() is always passed with altmap set to NULL during error handling. This leads to freeing of struct pages using free_pages(), eventhough the allocation might have been performed with altmap support via altmap_alloc_block_buf(). Fix the error handling by passing altmap in arch_remove_memory(). This ensures the following: * When altmap is disabled, deallocation of the struct pages array occurs via free_pages(). * When altmap is enabled, deallocation occurs via vmem_altmap_free(). Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by:
David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by:
-
Sumanth Korikkar authored
[ Upstream commit 001002e7 ] From Documentation/core-api/memory-hotplug.rst: When adding/removing/onlining/offlining memory or adding/removing heterogeneous/device memory, we should always hold the mem_hotplug_lock in write mode to serialise memory hotplug (e.g. access to global/zone variables). mhp_(de)init_memmap_on_memory() functions can change zone stats and struct page content, but they are currently called w/o the mem_hotplug_lock. When memory block is being offlined and when kmemleak goes through each populated zone, the following theoretical race conditions could occur: CPU 0: | CPU 1: memory_offline() | -> offline_pages() | -> mem_hotplug_begin() | ... | -> mem_hotplug_done() | | kmemleak_scan() | -> get_online_mems() | ... -> mhp_deinit_memmap_on_memory() | [not protected by mem_hotplug_begin/done()]| Marks memory section as offline, | Retrieves zone_start_pfn poisons vmemmap struct pages and updates | and struct page members. the zone related data | | ... | -> put_online_mems() Fix this by ensuring mem_hotplug_lock is taken before performing mhp_init_memmap_on_memory(). Also ensure that mhp_deinit_memmap_on_memory() holds the lock. online/offline_pages() are currently only called from memory_block_online/offline(), so it is safe to move the locking there. Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by:
-
Ming Lei authored
[ Upstream commit 0263f92f ] group_cpus_evenly() could be part of storage driver's error handler, such as nvme driver, when may happen during CPU hotplug, in which storage queue has to drain its pending IOs because all CPUs associated with the queue are offline and the queue is becoming inactive. And handling IO needs error handler to provide forward progress. Then deadlock is caused: 1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's handler is waiting for inflight IO 2) error handler is waiting for CPU hotplug lock 3) inflight IO can't be completed in blk-mq's CPU hotplug handler because error handling can't provide forward progress. Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(), in which two stage spreads are taken: 1) the 1st stage is over all present CPUs; 2) the end stage is over all other CPUs. Turns out the two stage spread just needs consistent 'cpu_present_mask', and remove the CPU hotplug lock by storing it into one local cache. This way doesn't change correctness, because all CPUs are still covered. Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reported-by:
Yi Zhang <yi.zhang@redhat.com> Reported-by:
Guangwu Zhang <guazhang@redhat.com> Tested-by:
Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <kbusch@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
