-
qcom-clk-for-6.103c5b3e17 · ·
Qualcomm clock updates for v6.10 Support in RCG and RCG2 are added for supporting setups where the same frequency can be reached through multiple configurations. This is then used to rework the IPQ8074 NSS port 5 and 6 clocks to resolve issues with certain frequencies. The APSS IPQ5018 PLL type is corrected, to resolve an issue with some boards failing to boot. The configuration is further corrected, to reduce the max CPU frequency to its expected value. This comes with a few more cleanups and corrections for Stromer PLLs. Kconfig dependencies are corrected for SM8650 GPU and SC8280XP camera clock controllers. The MSM8998 Venus clocks are corrected, to make Venus functional. Downstream remnants related to DisplayPort are cleaned up across SM8450, SM6350, SM8550, and SM8650. The MSM8996 CBF PLL is cleaned up by reusing the Huayra APSS register map. The seemingly generic configuration of HFPLL is replaced by adding a QCS404-specific compatible. On SM8150 the CPUSS AHB clock source clock is removed, as this is not controlled by Linux. An unused field is removed in the RPM clock controller context. Missing MODULE_DEVICE_TABLE is added to MSM8917 and MSM8953 global clock controller drivers.
-
qcom-arm64-for-6.10-20ea3e1d6 · ·
A few more Qualcomm Arm64 DeviceTree updates for v6.10 This corrects the obviously broken compatible of the USB VBUS regulator in PM6150. It clears the odd-looking default address on QCS404 EVB, with the expectation that a proper address is provides by other means. The newly added SM8650 GPU node is corrected with a missing memory region. The third DWC3 instance on SC8280XP is added, and enabled on Lenovo Thinkpad X13s to give working fingerprint sensor.
-
qcom-arm64-defconfig-for-6.10-2b052c7fe · ·
One more Qualcomm Arm64 defconfig update for v6.10 This enables the SM6115 interconnect provider, to make it possible to boot boards on this SoC.
-
qcom-drivers-for-6.10-24b34d4c2 · ·
A few more Qualcomm driver updates for v6.10 This fixes a sleep-while-atomic issue in pmic_glink, stemming from the fact that the GLINK callback comes from interrupt context. It fixes the Bluetooth address in the example of qcom,wcnss, and it enables UEFI variables on SC8180X devices (Primus and Flex 5G).
-
qcom-arm64-for-6.10873d845a · ·
Qualcomm Arm64 DeviceTree updates for v6.10 Support for Sony Xperia 1V, on the SM8550 platform, is added. On IPQ8074, UART6 is described and unused gpios from QPIC are removed. Backlight and touchscreen are described on Samsung Grand Prime devices. RGB LED is added to Sony Xperia "Yoshino" devices, on which the volume-up key definition is corrected as well. Light Pulse Generator node is added to PM6150L PMIC, and blocks related to USB Type-C on PM6150 are added. On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of remoteprocs and both USB Type-C and native DisplayPort are enabled. For the related IDP display is enabled, and the PMIC volume and power buttons are described. The inline crypto engine is added for SC7280, and an additional turbo frequency is added to the MDP. USB Type-C port management is introduce for the QRB2210 RB1. WiFi firmware-name qualifier is added to both RB1 and RB2 boards. The LMH node is added for the QCM2290, to configure the thresholds as well as provide thermal pressure input. The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow UHS modes. The unused DCC is disabled on SC7180, and unused PMIC gpio block is disabled on Trogdor. For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with agreed upon firmware structure. The frequency of the I2C bus for touchpad is brought up to mitigate missing events. A number of additional cleanups are introduced. For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad introduced. A PS_HOLD-based restart node is introduced and acts as a fallback if other mechanisms are unavailable to restart the board. QFPROM is described, missing LMH interrupts for thermal pressure are added. The TCSR download mode register is added, to allow configuring if download mode should be entered on a crash. USB Type-C handling is introduce for Fairphone FP3 as well. On SM6350 crypto engine and DisplayPort controllers are introduced. WiFi is enabled on the SM8150 Hardware Development Kit (HDK) USB PD properties are added on Xiaomi Mi Pad 5 Pro devices. Interconnect paths are added for UFS on SM8350, to ensure the bus is voted for when the controller is operating. On SM8550 the DMA coherency properties are corrected for SMMU and a few consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are adjusted. Fastrpc banks are marked non-secure as needed. The GPU description is introduced on SM8650, and enabled on the QRD. A missing reserved-memory node is added, as is a few missing fastrpc compute banks, and the non-secure-domain flag for other banks. On X1 Elite SPMI support is added, together with PMIC definitons. The link properties for DP3 are corrected, and audio-related resets are introduced. SoundWire properties are corrected. Nodes describing the PCIe bridge under the host controller is added for a bunch of platforms. The GPIO carrying orientation information for USB Type-C is added across Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845 HDKs. A few dtbTool-specific compatibles for msm8916 is dropped from the bindings. A number of DeviceTree binding validation issues are corrected.
-
qcom-arm32-for-6.1001088e25 · ·
Qualcomm Arm32 DeviceTree updates for v6.10 The QCA8074 PHY package found in IPQ4019 is properly described. The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support is added, upon support for Sony Xperia Z3 is added. Also based on MSM8974, support for Samsung Galaxy S5 China is introduced. The WiFi board type is added for these "klte" Samsung devices, to select appropriate NVRAM firmware file. Based on MSM8226, support for Motorola Moto G (2013) is added. Nodes representing the PCIe bridges under existing controllers are added for APQ8064, IPQ4019, IPQ8064, and SDX55. A number of fixes throughout to improve compliance with DeviceTree bindings.